Eaglemoss Jeep willys 900x250

Losi Updates RTR 1/8 8IGHT Nitro Buggy & Truggy With Spektrum Electronics

Losi Updates RTR 1/8 8IGHT Nitro Buggy & Truggy With Spektrum Electronics

From Losi:

Losi Updates RTR 1/8 8IGHT Nitro Buggy & Truggy With Spektrum Electronics Losi Updates RTR 1/8 8IGHT Nitro Buggy & Truggy With Spektrum Electronics Losi Updates RTR 1/8 8IGHT Nitro Buggy & Truggy With Spektrum Electronics Losi Updates RTR 1/8 8IGHT Nitro Buggy & Truggy With Spektrum Electronics
Losi RTR 1/8 8IGHT-T 4WD Nitro Truggy

If you are serious about becoming a competitive nitro truggy racer, this is the place to start. The Losi® 8IGHT-T Nitro Truggy RTR comes completely assembled and equipped with the brute power of a Dynamite® .28 nitro engine and the precise response that only a Spektrum™ SLT radio system can provide. You also get the benefit of a pre-set suspension that has the same geometry team drivers use on their 8IGHT-T truggies. As your skills progress and you gain more racing experience, you can gradually upgrade the vehicle’s performance with many of the 8IGHT-T option parts currently available.

Heavy-Duty Steering and Gen III Radio Tray

The vehicle comes equipped with a Spektrum™ ultra-torque metal-gear steering servo that maintains superb holding power and precise control on the roughest tracks. A Gen III radio tray prolongs steering and throttle servo life with features like ball-bearing linkages and more accurate linkage alignment. It resists wear and tear from chassis flex, too.

Brute Power Brute Power

A powerful Dynamite .28 nitro engine gives you all the grunt you need to be a front runner, right out of the box. It is equipped with a convenient pull-start so you don’t have to buy a starter box to get racing right away.

Metal-Gear Drivetrain and Sealed Differentials

A metal-gear drivetrain and sealed differentials give the truggy the durability it needs for long heats and rough conditions.

Center and Rear Dogbones

These eliminate the friction of a CV coupler and improve bump handling in the rear of the car.

Pre-Set Suspension Geometry

The suspension geometry is pre-set from the factory to match that used by professional team drivers so you can hit the track with confidence. And because it uses fixed-length turnbuckles and steering arms, you know it will remain consistent race to race.

Features:

  • Your fast track to nitro truggy racing
  • Spektrum SLT 3-Channel SLT Radio System
  • Spektrum SLR300 Surface Receiver
  • Spektrum™ S614 Waterproof Metal Gear Surface Servo, 23T
  • 4mm 6061-T6 Aluminum Chassis Plate
  • Gen III radio tray for longer servo life
  • Dynamite® .28 nitro engine with pull start
  • Pre-set suspension geometry
  • Metal-gear transmission and sealed differentials
  • Center and rear dogbones
  • 15mm adjustable oil-filled shocks

In The Box

(1) 8IGHT 4WD Nitro Truggy RTR
(1) Spektrum SLT 3-Channel SLT Radio System
(1) Dynamite 1600mAh 6V NiMH receiver pack
(4) AA Transmitter Batteries
(1) 4-Way Cross Wrench
(1) Product Manual

Needed to Complete:

  • 20-30% Nitromethane fuel
  • Nitromethane-Approved Dispenser
  • NiMH Charger
  • Glow Igniter

Specs:

Approximate Assembly Time: No assembly required
Ball Bearings: Full set
Battery: Included
Body: Painted and screen printed
Brakes: Dual disc
Charger: Sold Separately
Chassis: 4mm 6061 T-6 aluminum
Completion Level: Ready-To-Run
Differential: Fluid filled gear type
Drivetrain: 4WD
Final Drive Ratio: 15.03:1
Fuel Tank Capacity: 4.2oz (125cc)
Power Type: Glow
Gear Pitch: 1.0 Module
Internal Gear Ratio: 3.91:1
Pinion: 13T
Product Height: 7.3″ (185 mm)
Product Length: 18.75″ (476 mm)
Product Width: 16.38″ (416 mm)
Radio: Included
Receiver: Included
Scale: 1/8
Servos: Included
Shock Type: Composite body
Spur Gear: 50T
Suspension: 4-wheel independent
Vehicle Type: Truggy
Wheelbase: 14.93″ (379 mm)

#LOS04011V2 – $469.99

Losi Updates RTR 1/8 8IGHT Nitro Buggy & Truggy With Spektrum Electronics Losi Updates RTR 1/8 8IGHT Nitro Buggy & Truggy With Spektrum Electronics Losi Updates RTR 1/8 8IGHT Nitro Buggy & Truggy With Spektrum Electronics Losi Updates RTR 1/8 8IGHT Nitro Buggy & Truggy With Spektrum Electronics

Losi RTR 1/8 8IGHT 4WD Nitro Buggy

If you are serious about becoming a competitive nitro buggy racer, this is the place to start. The Losi® 8IGHT Nitro Buggy RTR comes completely assembled and equipped with the brute power of a Dynamite® .21 nitro engine and the precise response that only a Spektrum™ SLT radio system can provide. You also get the benefit of a pre-set suspension that shares the same geometry team drivers use on their 8IGHT buggies. As your skills progress and you gain more racing experience, you can gradually upgrade the vehicle’s performance with many of the 8IGHT option parts currently available.

Race-Proven Durability

In addition to its 4mm T-6 aluminum chassis plate, the 8IGHT Nitro buggy uses a Gen III radio tray that prolongs steering and throttle servo life with features like ball-bearing linkages and more accurate linkage alignment. It has been designed to resist wear and tear from chassis flex, too.

Brute Power Brute Power

A powerful Dynamite .21 nitro engine gives you all the grunt you need to be a front runner, right out of the box. It is equipped with a convenient pull-start so you don’t have to buy a starter box to get racing right away.

Metal-Gear Drivetrain and Sealed Differentials

A metal-gear transmission and sealed differentials give the buggy all the durability it needs for long mains and rough conditions.

Center and Rear Dogbones

These eliminate the friction of a CV coupler and improve bump handling in the rear of the car.

Pre-Set Suspension Geometry

The suspension geometry is pre-set from the factory to match that used by professional team drivers so you can hit the track with confidence. And because it uses fixed-length turnbuckles and steering arms, you know it will remain consistent race to race.

Features:

  • Your fast track to nitro buggy racing
  • Spektrum SLT 3-Channel SLT Radio System
  • Spektrum SLR300 Surface Receiver
  • Spektrum S614 Waterproof Metal Gear Surface Servo, 23T
  • 4mm 6061-T6 Aluminum Chassis Plate
  • Gen III radio tray for longer servo life
  • Dynamite® .21 nitro engine with pull start
  • Pre-set suspension geometry
  • Metal-gear transmission and sealed differentials
  • Center and rear dogbones
  • 15mm adjustable oil-filled shocks

In The Box

(1) 8IGHT 4WD Nitro Buggy RTR
(1) Spektrum SLT 3-Channel SLT Radio System
(1) Dynamite 1600mAh 6V NiMH receiver pack
(4) AA Transmitter Batteries
(1) 4-Way Cross Wrench
(1) Product Manual

Needed to Complete:

  • 20-30% Nitromethane fuel
  • Nitromethane-Approved Dispenser
  • NiMH Charger
  • Glow Igniter

Specs:

Approximate Assembly Time: No assembly required
Battery: Included
Body: Screen printed, cab forward design
Brakes: Composite disc with steel pads
Charger: Sold Separately
Chassis: 4mm 6061 T-6 aluminum
Completion Level: Ready-To-Run
Differential: Sealed, viscous filled
Drivetrain: 4WD
Final Drive Ratio: 11.5:1
Front Track: 12.1″ (307mm)
Fuel Tank Capacity: 4.2oz (125cc)
Power Type: Glow
Gear Pitch: 1.0 MOD
Ground Clearance: 2.4″ (60mm)
Internal Gear Ratio: 3.92:1
Pinion: 17T
Product Height: 7.1″ (180 mm)
Product Length: 19.6″ (498 mm)
Product Weight: 7.8lbs (3.5kg)
Product Width: 12.1″ (307 mm)
Radio: Included
Rear Track: 12.1″ (307mm)
Receiver: Included
Scale: 1/8
Servos: Included
Shock Type: 16mm Big-Bore, aluminum body, oil-filled
Spur Gear: 50T
Suspension: Independent
Vehicle Type: Buggy
Water-Resistant: Yes
Wheelbase: 12.7″ (323 mm)

#LOS04010V2 – $419.99
Visit Losi.com
See more posts about Losi

Never miss an issue of RC Car Action!

Subscribe today with a Digital Edition subscription or Print + Digital combo!

Eaglemoss Mustang Eleanor 600x120
Updated: April 9, 2021 — 11:24 AM

Leave a Reply

Your email address will not be published. Required fields are marked *

Air Age Media © 2021
WordPress Image Lightbox