Robitronic Pipe Protect and Flexa Fix

Mar 31, 2010 No Comments by

New from Robitronic:Pipe Protect

RC Tech Pipe Protect rotects your exhaust system against oil and rubber deposit while racing. A clean exhaust gives better resonance, which means better performance from your engine. With RC Tech Pipe protect your exhaust system can evacuate the temperature better.

Easy to use: Spray a layer of Pipe Protext from a close distance on your new or just cleaned and preferably polished exhaust pipe. After each ride clean the exhaust pipe with a clean cloth, if necessary slightly sprayed with some Pipe Protect. Treat the exhaust pipe again before each race.

#RTC81

Name:  rtc80_hires_web-001.jpg Views: 0 Size:  110.5 KB

Lexan Glue “Flexa Fix”

Repair or reinforce new or used Lexan Bodies with “Flexa Fix”!

Easy to use: Use a brush or other applicator. Apply enough Flexa Fix to the damaged area. Be careful not to apply too much in one go as it can be difficult to manipulate. If necessary apply two or three coats to build up the joint area. Use epoxy blanket of pieces of polycarbonate to re-inforce if necessary. You can also use the Flexa Fix to re-enforce body corners. Flexa Fix is also a perfect glue for most applications in the RC Hobby!

#RTC80

__________________
Trevor “Chilly” Duncan
Online News Editor
Radio Control Car Action
rccanews@airage.com
http://www.rccaraction.com
Featured News, Product News

About the author

Bringing you RC product news you can use on a daily basis as Car Action's Online News Editor. I have over 15 years of RC experience, plus a background in print and broadcast journalism, engineering, information technology, direct marketing, and even banking. Currently I enjoy racing 1/10 electric off-road, and have been bitten by the short course bug.
No Responses to “Robitronic Pipe Protect and Flexa Fix”
Copyright © 2014 Air Age Media. All rights reserved.