Robitronic Pipe Protect and Flexa Fix

Robitronic Pipe Protect and Flexa Fix

New from Robitronic:Pipe Protect

RC Tech Pipe Protect rotects your exhaust system against oil and rubber deposit while racing. A clean exhaust gives better resonance, which means better performance from your engine. With RC Tech Pipe protect your exhaust system can evacuate the temperature better.

Easy to use: Spray a layer of Pipe Protext from a close distance on your new or just cleaned and preferably polished exhaust pipe. After each ride clean the exhaust pipe with a clean cloth, if necessary slightly sprayed with some Pipe Protect. Treat the exhaust pipe again before each race.


Lexan Glue “Flexa Fix”

Repair or reinforce new or used Lexan Bodies with “Flexa Fix”!

Easy to use: Use a brush or other applicator. Apply enough Flexa Fix to the damaged area. Be careful not to apply too much in one go as it can be difficult to manipulate. If necessary apply two or three coats to build up the joint area. Use epoxy blanket of pieces of polycarbonate to re-inforce if necessary. You can also use the Flexa Fix to re-enforce body corners. Flexa Fix is also a perfect glue for most applications in the RC Hobby!


Trevor “Chilly” Duncan
Online News Editor
Radio Control Car Action

Never miss an issue of RC Car Action!

Subscribe today with a Digital Edition subscription or Print + Digital combo!

Updated: December 21, 2010 — 1:59 PM
Air Age Media ©