XRAY XB2 ’24 1/10 2WD Off-Road Buggy [VIDEO]

From XRAY:
XRAY XB2’24 All-new Features:

• New one-piece chassis design with integrated kick-up eliminates the lower brace and improves suspension geometry
• The wider chassis shape fits the latest batteries and has a milled pocket under the servo area for improved flex and optional weight placement
• The kits’ chassis lengths are selected to match typical track conditions: Medium for Carpet, Short for Dirt
• New elevated side braces improve flex characteristics and integrate with the new front upper deck
• The completely new front upper deck’s bridge design integrates with the new steering system and moves the shock tower forward with the shocks behind the tower
• The new anti-roll bar mounting system eliminates play for more consistent handling
• A new steering plate, steering arms and posts provide a wider range of geometry adjustments and improved steering response for easier control
• New 2 dot steering extensions match the new steering system geometry, working together to improve the steering angles and responsiveness
• Front roll center holder features the two most common inner camber link positions for simplified setup, along with provisions for the new anti-roll bar system
• The new anti-roll bar system uses shorter bar shapes with a top mounting system for easier adjustments
• Front shock tower integrates with the upper deck, placing the shocks behind the tower, with new front wing mounting locations
• All New 13.2mm shock design features new shock bodies, 2.0 and 2.5mm piston choices, shock caps, nuts and shock shafts
• The 13.2mm shocks use a new X-ring design for improved seal without excess friction for improved shock operation
• New conical springs have been selected to work with the new 13.2mm shock package
  RF and RR suspension holders move the inner pivot wider and alter geometry to 3 deg of integrated toe (w/ 0 inserts) for increased stability on all surfaces
• The rear shock tower lowers the shock position by 4mm for improved roll characteristics
• The improved gear diff (XB2C) with new diff case and new diff outdrives unifies drive shaft lengths between ball diff and gear diff
• The included 77mm driveshafts will work with both the ball diff and gear diff for simplified parts needs and easier differential changes between surfaces
• New universal 2-pad slipper with updated top shaft, slipper plates, spring and nut improves traction in all conditions
• Both Rear Motor and Front Motor gearboxes are included in each kit to adapt the XB2 to any surface or condition
• Both Standard and Disengaged rear arms are included in every kit to expand the tuning options out of the box
• Rear uprights with new lower roll center position improves stability with better resistance to collapsing in high-speed corners
• Narrower rear wheel hexes are optimized offset for use with the wider suspension holders
• New ‘Lush’ rear wing with significantly increased lifespan improves airflow and maintains chassis attitude over large jumps while improving traction in all conditions
• A composite cover is included for the front tower to provide protection in crashes and increase lifespan.
• The included front wing is mounted to the front shock tower
• New Carpet and Dirt bodies match the new chassis profile with improved airflow for better handling
• Front & Rear LSM arms in Medium composite are suitable for all conditions and provide better crash durability
• Medium composite steering blocks, C-hubs and uprights provide additional durability out of the box
• Optional stainless steel weigh plate matches the new chassis cutout and uses tapered holes for easier installation and weight balance adjustment
• Wire organizer helps maintain clear electronics installation
• 30mm Fan Holder for additional ventilation

Florida Carpet Champions 2023.

The all-new XB2 platform demonstrated its high-performance potential with its debut at the highly contested Florida Carpet Championship, where it took 2x TQ, Win and multiple podium finishes against the stiff competition from the world’s best drivers.

All-new Platform.

After a decade of worldwide success with the XB2, we reached the point in time to re-evaluate the current platform and to incorporate all the latest experiences, knowledge and current racing trends into a fully redesigned 2WD buggy. The all-new XB2’24 brings a completely new platform with 75% of components being redesigned and updated, making it for a completely new XB2 platform.

USA Champion.

XRAY XB2 has been successful since its earliest versions released several years ago. From local clubs to international competitions, the XB2 has achieved success at all levels of racing including winning the ROAR Nationals.

Made in Europe

Designed, developed, and fully manufactured in-house at the XRAY factory in Slovakia, Europe, using the most high-tech German and Swiss machines and premium European materials, crafted with XRAY’s legendary attention to detail by our artistic production specialists. The XB2 is truly a masterpiece.

Uni-Platform™.

The XB2 platform works at the highest competition level in any track conditions, whether it be super-low-traction dusty tracks, medium-traction, or super-high-traction carpet or astro turf; there is an XB2 for you that will handle flawlessly in any of these conditions.

There are two different XB2 kits to choose from – Carpet Edition and Dirt Edition, both built on the same platform with full compatibility with interchangeable parts.

The Carpet Edition is designed for medium to very-high traction conditions, while the Dirt Edition is designed for very-low to medium traction conditions.

The Uni-Platform™ allows either version of the XB2 to be tuned or converted to suit any track conditions with only a few additional parts.

Multi-Conditions Concept.

Each new XB2 kit includes the parts necessary to build and adjust the car for a wider range of track conditions compared to previous models. The Carpet & Dirt Editions are each equipped for their unique surface requirements; both including a versatile set of components to adapt the new XB2 to a wider variety of conditions right out of the box.

All-new Front End.

The front assembly receives significant improvements for 2024, featuring an all-new bridge style front upper deck, new steering system and servo horns, new shock tower with the shocks positioned behind the tower, new side braces and an improved play-eliminating anti-roll bar mounting system.

Chassis.

All-new one-piece chassis with integrated kick-up optimizes weight balance and flex with its new shape and chassis weight options, fits the latest battery types, and improves handling in all different traction conditions.

Chassis Alternatives.

Multiple chassis lengths are offered to suit different surface types, with each kit version including the best version for the intended track type out of the box.

Side Braces.

Redesigned side braces feature an elevated design to support the new one-piece chassis and connect directly with the new bridge upper deck.

The new braces have improved flex to provide improved front stability while also increasing rear traction, and the additional battery holder mounting holes expand the weight balance adjustment range.

Battery Holder.

A new full forward battery mounting position is made possible by the new side braces. The additional tuning options for weight balance adjustments help to fine-tune set-ups for different track conditions.

Front Upper Deck.

The new front upper deck improves flex in all directions and provides extra clearance for the new steering system, anti-roll bar collar, and shock mounting positions. The new design improves both handling & durability.

Steering system.

The new steering system improves precision and steering feel. There is also increased clearance around the system for easier maintenance & set-up adjustments.

Steering Blocks.

Updated steering blocks in a new medium hardness material improve both handling and reliability. The new steering block extension geometry improves steering & feel in all conditions.

Caster Blocks.

Caster blocks made from a new medium hardness material improve reliability. Different caster blocks hardness choices are available to tune set-up for any track condition.

Front Roll Center.

The new shape of the front roll center holder integrates with the bridge upper deck and anti-roll bar system, and simplifies set-up choices by reducing the roll center positions to the most frequently used locations.

Arm Mount.

The XB2 continues to use an arm mount to connect the lower suspension arms to the chassis. The kit arm mount is 0° angle, keeping the front geometry matching the chassis’ integrated kick-up.

Big Bore Shocks.

All-new big bore 13.2mm shocks improve handling, landing, and bump absorption. New X-rings provide smooth operation & dust resistance. Two different piston thicknesses are included in the kit for tuning along with piston blanks for additional tuning possibilities.

Shock Pistons.

The new piston choices were updated for ideal fit and dampening in the new big bore shock bodies. All-new 2-hole pistons (1.6 and 1.8mm) are included in 2.0mm or 2.5mm thickness alternatives.

In addition, two sets of blank pistons in both thickness alternatives are included for individual custom modification. All pistons are made from Delrin and are molded using ultra-high precision moulds.

Shocks Springs.

A completely new range of conical springs are available for the big bore shocks. Carpet and Dirt edition include 2 complete sets of springs chosen for their intended track conditions. The spring rates are more closely spaced to give smaller tuning increments that allow for easier shock tuning.

Shock Towers.

Redesigned shock towers compliment the new big bore shocks. The front tower protects the shocks better in a crash and features an integrated front wing mount. The new rear tower lowers the shock position for a softer suspension feel that generates more traction while still reducing chassis roll.

Suspension Holders.

Redesigned rear suspension holders feature wider geometry with 3 degrees integrated rear toe for increased stability in all conditions and more support in and out of a corner.

Rear Suspension Arms.

Updated rear suspension arms in a new, more reliable medium hardness material significantly improve reliability. Both Standard and Disengaged suspension arms are included in both Carpet & Dirt kits. Different hardness arms are available for additional turning options.

Front Suspension Arms.

As with the other suspension components, the front arms are molded from a new medium hardness composite mixture to improve reliability and strength. The medium composite provides excellent performance on a variety of conditions with the added benefits of increased strength to help finish the race.

Rear Uprights.

New rear uprights with lowered roll center positions improve stability with less collapse of the suspension in high-speed corners. Two different uprights are included in each kit for added set-up adjustments.

Gear Box.

Both forward and rear motor gear boxes are included in the kit for configuring the car to suit many different track conditions. The super-narrow and ultra-low CG gear boxes retain quick & easy diff access in either form.

Gear Differential.

The Carpet Edition’s redesigned gear diff made unified drive shaft lengths for ball and gear differentials possible. The external parts of the diff were updated to reduce the differential width. Steel gears are now included for maximum durability.

Slipper Clutch.

All-new slipper clutch was developed to work in all track conditions. The new design features a shorter and lighter top shaft, plates with larger engagement area, and a larger clutch spring and nut. The new design improves adjustability, as well as on-throttle jump landings.

Anti-roll Bars.

Completely redesigned front anti-roll bar system integrates with the new chassis and front bulkhead design. The Carpet Edition’s included rear anti-roll bar is updated for a perfect height adjustment & better drive shaft clearance.

Drive Shafts.

To simplify the spare parts compatibility, the drive shafts length is unified between the Gear Diff and Ball Diff thanks to the new gear diff design. The included 77mm long drive shafts now fit both differentials.

Wheel Hubs.

To unify the wheel hub specs, both Carpet & Dirt Edition include the same wheel hubs with 0mm offset in front and +2.25mm offset in rear.

High Traction Body.

The Delta Carpet version of the new XB2 body is designed for higher traction conditions. The new profile improves the stability and corner speed without too much roll.

The Delta body is also available in lightweight version.

Low Traction Body.

The Delta Dirt version of the new XB2 body is intended for lower traction conditions. The new profile improves the stability and increases downforce towards the rear of the vehicle to help generate more traction.

The Delta Dirt body is also available in lightweight version.

Wings.

All new front and rear wings are included in both kit versions. The new rear wings generate more traction, jump stability, and significantly increased lifespan. Both front & rear wings feature pre-marked mounting holes for easy installation.

Wheels.

New slim front wheels with narrow offset use standardized wheel offset, and a redesigned countersunk area for the wheel nut to sit deeper in the wheel.

Motor Cooling.

The optional cooling fan is mounted via a specially designed composite holder that is mounted only through one screw and a centering pin to minimize vibrations and increases fan lifespan.

There are two different mounting alternatives depending on the battery placement; either behind the motor on the side or in front of the motor in the center of the chassis.

Chassis Tuning.

All-new XB2 chassis features multiple positions for additional balancing weights as well two mounting positions for optional motor cooling fan. The weights under ECS and servo are mounted via screws to keep the proper chassis flex.

Some information shown below may include details from previous kits, and it may vary slightly from current kit specifications.

World Champion.

At the World’s most competitive off-road race – the IFMAR World Championship, it was XRAY’s junior team who brought the Junior World Champion title to the XB2 platform. Tested and successfully run in the highest competition races, now you can enjoy the same winning platform.

Ball Differential.

The XB2 ball differential offers improved performance, durability, and easier maintenance. The externally adjustable ball differential is machined from HUDY Spring Steel™ and is additionally hardened for extra durability and a longer lifespan. A high-quality carbide thrust bearing and carbide balls are included for ultra-smooth operation. The outdrive adapters are designed for use with 2.5mm pin drive shafts. The ball differential is suggested for all types of dirt tracks and for bumpy Astro tracks and is included in the Dirt edition only.

Active Differential.

The unique XRAY Active Differential is a high-performance, adjustable gear differential for XB2 … vastly improving the buggy’s speed and handling characteristics. The special design of the internal components using different angled segments allows the diff gears to engage on-power to increase the forward traction, making it faster and easier to drive.

Easy Diff Access.

Gear box features super easy access to the differential. Both gear boxes for Dirt and Carpet edition have the super easy diff access by removing only 6 screws.

Each gear box incorporates all the finest details and craftsmanship. All parts fit together perfectly, and the super-easy access to the rear differential will be appreciated by every racer. The durable gear box houses the differential with all the transmission components and serves as the mounting point for the rear roll center holder, motor plate, and rear shock tower.

Diff Height Adjustment.

The gear box features differential height adjustment. There are 6 height adjustment positions available using the included eccentric bushings. The ideal position will vary depending on the track conditions, ride height and the size of the tires used.

Motor Plate & Spur Gear Protector.

The super lightweight motor mount is machined from Swiss 7075 T6 aluminum and is a universal design that fits both Carpet and Dirt Edition gear boxes.

The molded composite gear protector prevents contact between the spur gear and the body. Moulded from strong, lightweight material, the cover helps to protect the body shell and spur gear, and it allows the body to be mounted lower without interference.

The motor plate is universal for both Dirt and Carpet edition.

Roll Center Holder.

Roll center holder fits the LCG gear box and features multiple roll center positions. The roll center holder also serves as the rear anti-roll bar mount.

An optional rear aluminum roll center holder features roll center positions in between the stock positions for additional tuning choices.

The roll center holder is universal for both Dirt and Carpet edition.

Motor Mount Brace.

The redesigned motor mount brace ensures optimum flex via a pivot ball mount that ensures side flex for increased traction.

The design of the car also allows removal of the motor mount brace to increase flex and to move the battery pack further to the rear to position more weight over the rear axles for improved rear traction.

The motor mount brace is universal for both Dirt and Carpet edition.

Multiple Servo Position.

To allow for more precise weight balance adjustment, the servo position is adjustable either more rearwards or frontwards; there are 3 positions to choose from.

When the servo is moved rearwards, there is more weight on the rear and less weight on the front. This results in less diving into a corner, while increasing rear traction. Recommended for low- and medium-traction conditions.

When the servo is moved more frontwards, there is more weight on the front and less weight at the rear. This increases the diving effect but reduces rear traction. Recommended for high- and very-high traction conditions.

Suspension.

Correct suspension geometry is one of the most important features of any RC model car, while at the same time being one of the most difficult & challenging features for a designer.

Suspension is always a mixture of:

• design and shape of individual suspension parts
• flex and hardness
• materials used
• mounting system
• geometry and position of mounting points of connecting parts

From the suspension arms, through the suspension blocks, to the light yet robust steering blocks, every suspension part has been carefully designed for the 2WD 1/10 off-road racing platform to provide responsive racing characteristics in all conditions.

Drivetrain.

The XB2 is a conventional gear-driven 2WD off-road car featuring:

• Rear Ball Differential (Dirt Edition) or Gear Differential (Carpet Edition) with adjustable oil viscosity, featuring 53T gear and internal satellite gears
• 25T (Dirt Edition) or 38T (Carpet Edition) graphite composite idle gear
• 20T super-lightweight Swiss 7075 T6 hardcoated aluminum top shaft
• adjustable slipper clutch with 78T main spur gear
• rear CVD drive shafts

Spur Gear.

Precision-molded spur gears are made from XRAY’s exclusive secret blend of composite material, allowing the gear to run true yet be robust enough to handle high-performance brushless motors. The spur gears are designed to have the lowest possible weight while staying strong and light. Each gear is stamped with the tooth number for easy identification.

The XB2 is equipped with an 81T spur gear which suits the majority of tracks. For additional tuning, optional 75T, 78T, and 84T spur gears are available.

Turnbuckles.

For maximum reliability, all turnbuckles are manufactured from special HUDY Spring Steel™ material for turnbuckles which features a tougher core. These turnbuckles are used for front & rear upright linkages and steering system.

Wheelbase & Weight Balance Adjustment.

Outer suspension pins holding the front caster block and rear uprights feature wheelbase shims for quick & easy wheelbase and weight balance adjustment. Using included shims in rear and in front, both front and rear blocks can be moved forward or rearward to adjust weight balance depending on track condition.

By moving the arms to the front, the balance & weight of the car are transferred more to the rear; this is recommended for medium- and high-traction conditions. By moving the arms to the rear, the balance & weight of the car are transferred more to the front.

Chassis Balance.

Chassis design focuses on balanced weight distribution and weight transfer. The chassis features pre-drilled holes for additional weights for optimum car balancing. Centerline holes are pre-drilled for easy balancing with the HUDY Chassis Balancing Tool #107880.

Ball-bearings.

The XB2 features greased ball-bearings for front steering blocks & rear uprights to increase lifespan in dusty conditions. The remaining bearings are degreased and oiled with AeroShell® Fluid 12 for maximum smoothness and long life.

A full set of 22 high-speed ball-bearings are used throughout the drivetrain to ensure maximum efficiency.

XRAY Instruction Manual.

XRAY Instruction Manuals have become the industry standard, being simply the best manuals included with an RC model car. Whether you are a first-time builder or an experienced racer, all instructions are straight-forward and easy to understand. The full-color instruction manual contains large 3D illustrations that show all assembly details in the clearest possible way.

Silicone Oils.

HUDY Exclusive Silicone Oils are manufactured in Europe and each batch is laboratory tested and calibrated to ensure the highest possible consistency and quality from batch to batch. Based on the industry-standard cSt rating, the new line of oils will be easy to identify, adjust, and feel.

When following any set-up sheets by XRAY or XRAY team drivers, you can be sure that the oils you will get for your car are exactly same as those used by the factory racing team, thus ensuring very exacting set-ups and handling.

HUDY Chem Series.

Graphite Grease.

The XB2 includes premium HUDY Graphite Grease which is a high-performance, advanced-technology semi-fluid lubricant which incorporates both extreme pressure additives and finely-dispersed graphite for load carrying. It is intended primarily for the lubrication of rotating parts and loaded gears. In addition to providing outstanding load carrying, it is formulated to have excellent adhesion and resistance to “fling-off” under extreme conditions. The grease reduces wear and increases parts life.

Adjustment Possibilities.

The extensive range of adjustment possibilities includes: caster, camber, toe, kick-up, anti-squat, ride height, downstops, track-width, lower roll center, upper roll center, roll center position, bump steer, wheelbase, Ackermann, adjustable shocks, adjustable rear diff, adjustable slipper clutch, and adjustable XRAY Multi-Flex™.

Set-up Book.

The XB2 is one of the most adjustable electric 2WD off-road cars in the world. Whether you are a hardcore racing enthusiast or a club-level sportsman, you can very easily adjust the XB2 to suit your racing style, track type, and track conditions.

To fully understand the set-up possibilities, we recommend the legendary HUDY Set-up Book, loaded with over 40 pages of high-quality pictures and easy-to-understand RC car set-up explanations. Whether you are a novice driver or an experienced racer, you can easily learn many set-up tips & tricks and improve your set-up skills, ultimately translating into improved racing performance with your XB2. The HUDY Set-up Book is available for download exclusively at www.hudy.net

XRAY VIP Customer Treatment.

Owning an XRAY model racing car is an experience on its own. Not only will you own the most premium luxury model racing car in the world, but you will also become a member of the prestigious family of XRAY owners with direct support and service from the XRAY factory. XRAY brings you the most up-to-date RC Web site on the Internet, with daily racing news and latest product developments. If you have any questions, problems or comments, you can ask the XRAY Support Team or any XRAY Factory Team Driver on the XRAY Support Forum. You can even upload your own set-up sheets or download from the thousands of different set-up sheets available from all around the world at the exclusive XRAY Virtual Set-up Sheet Database, the world’s largest set-up sheet database. And that is only the start of the VIP treatment you get by joining Team XRAY.

Visit TeamXRAY.com
See more posts about XRAY