From Trinity:
ROAR 2.5t Modified Brushless Motor
Designed for all out power and speed needed for Extreme On-Road Racing – Drag Racing, Pan Cars & Touring Cars
Standard Race SPEC Features:
- Monster Horsepower Series is all new!
- Aluminum based sensor board for true sensor alignment
- Infinite Timing Adjustment
- 2mm Copper Tabs
- Thicker Pure Copper Solder Tabs and Collector
- Thermal Stator Coating for the best heat dissipation possible
- Turbine style vented nose
- More Vents for More Cooling
- New 220C wire coating
- Certified Gauge High Temperature Wire
- New Short Stack Stator Design
- New Stator Material
- Grade 5 Ball Bearings
- Uses all D3.5, D4 and 24K Rotors
- 10,000Kv this number is approximate set as Zero Degrees of Timing. Sensored Burshless Motors are not rated in Kv’s due to the fact that timing and voltage can effect the Kv number.
Monster Certified Plus 2.5T 2-3 Cell Drag Racing Brushless Motor TEP1539DXX
Motolyser print out not available on some lower turn motors due to the extreme load. All other tests are performed and Certified.
Certified Team SPEC (Plus) Features:
(Tuning Option Service +$65.00)
- We will measure the asymmetry of the rotor, a crucial part in building a fast motor.
- Buying a Certified Motor is the closest anyone can get to buying a Trinity Team Motor. Example: Asymmetry in a brushless motor could be anywhere from “0” to “30 plus”. Certified Plus will have no higher than a “4” so you never see a rotor higher than a “4” in the “PLUS” line.
- The other advantage will be each and ever Certified plus motor will come with a complete print-out*** after running the motor on the Motolyser.
- Ceramic Red-Sealed Bearings installed (Front and Rear)
- Motor will come pre-set from our factory for 2-3 Cell (2.5T Drag Racing )
* MAX Voltage 11.1v 3 Cell Lipo Battery
* Check your ESC Specs to make sure that it can handle down to a 2.5t. We recommend running a 1/8 Scale Speed Control (ESC)
#TEP1539 – $99.99
ROAR 3.5t Drag Racing Modified Brushless Motor
Comes with TEP1154 13.5mm x 24.2mm Ultra Torque – Black Rotor Installed
Designed for all out power and speed needed for Extreme On-Road Racing – Drag Racing, Pan Cars & Touring Cars
- Monster Horsepower Series is all new!
- Aluminum based sensor board for true sensor alignment
- Infinite Timing Adjustment
- 2mm Copper Tabs
- Thicker Pure Copper Solder Tabs and Collector
- Thermal Stator Coating for the best heat dissipation possible
- Turbine style vented nose
- More Vents for More Cooling
- New 220C wire coating
- Certified Gauge High Temperature Wire
- New Short Stack Stator Design
- New Stator Material
- Grade 5 Ball Bearings
- Uses all D3.5, D4 and 24K Rotors
- 9100Kv this number is approximate set as Zero Degrees of Timing. Sensored Burshless Motors are not rated in Kv’s due to the fact that timing and voltage can effect the Kv number.
* MAX Voltage 11.1v 3Cell Lipo Battery
* Check your ESC Specs to make sure that it can handle down to a 3.5t
#TEP1540D – $99.99
Visit TeamTrinity.com
See more posts about Trinity