Search Results for – "Factory Team"Article(s) Found: 1,140Latest: 01-01-1970
Oldest: 01-01-1970


Trail Tip Tuesday: Installing Factory Team Ring Gear [VIDEO]

Trail Tip Tuesday: Installing Factory Team Ring Gear [VIDEO]

From Element RC: If you drive your rig as much as we do, there’s bound to be some wear in your rig’s drive system. Doing preventative maintenance like we covered in our “Axle Maintenance” Trail Tip video is necessary to keep your rig reliable. It’s also a great opportunity to upgrade the stock ring gear […]
Factory Team Lockout Slipper Clutch For The DR10

Factory Team Lockout Slipper Clutch For The DR10

From Factory Team: Get the most out of your No Prep Drag Cars with our NEW FT Lockout Slipper Clutch! Team Associated’s FT Lockout Slipper Clutch dynamically and independently controls the amount of slip created during launch and when down the track at speed. Lockout combinations are unlimited, depending on track conditions, amount of power, […]

Factory Team Parts For The DR10, SR10, RB10 & Pro2 SC10

Factory Team Parts For The DR10, SR10, RB10 & Pro2 SC10

From Factory Team: These new Factory Team parts were designed to add adjustability and increase the durability of your Team Associated Kit or RTR. Highly adjustable C and D arm mounts and rear hubs allow for fine tuning toe, anti-squat, and roll centers to make your vehicle perform as desired on any surface you drive. […]
Factory Team 1:8 Scale Titanium Turnbuckles

Factory Team 1:8 Scale Titanium Turnbuckles

From Factory Team: New Factory Team titanium turnbuckles add bling and durability at an affordable cost! Each part is made from high quality titanium and is a direct replacement to the stock steel turnbuckle. #1423 5x44mm length is a replacement for the existing #89269 5x38mm length steel turnbuckle. The increased thread engagement adds extra durability. […]

Factory Team HT 0 Steering Block Arms For The RC10B74.1

Factory Team HT 0 Steering Block Arms For The RC10B74.1

From Factory Team: These new HT 0 Steering Block Arms for the RC10B74.1 help make the steering less aggressive off center with a smoother turn-in feel, which helps improve drivability in high-traction conditions. #92305 – $9.99 Visit AssociatedElectrics.com/FactoryTeam See more posts about Factory Team
Factory Team 1/8 Pinion Gears

Factory Team 1/8 Pinion Gears

From Factory Team: New Factory Team Mod 1 pinion gears are made from hard anodized 7075 aluminum and offer a lighter rotating mass over a steel gear. Fewer teeth equals quicker acceleration. More teeth equals more top end speed. Use only with plastic spur gears. Fits 1:8 vehicles: RC8B3e RC8B3.1e RC8B3.2e RC8T3e RC8T3.1e RC8T3.2e Nomad […]

Factory Team +3mm Aluminum Steering Bellcranks

Factory Team +3mm Aluminum Steering Bellcranks

From Factory Team: Our new Factory Team +3mm bellcranks allow racers to tune the caster with 0 and 2.5 deg. inserts and still minimize bump steer! On high-traction tracks, the pro drivers have gained cornering speed by reducing caster from the kit 5 deg. inserts down to 0 or 2.5 deg. Unfortunately, the 0 or […]
Factory Team Carbon Fiber Standup Motor Plate For The B6.x, T6.x & SC6.x

Factory Team Carbon Fiber Standup Motor Plate For The B6.x, T6.x & SC6.x

From Factory Team: New for the Factory Team brand is the carbon fiber standup motor mount. This 3mm thick motor mount is lightweight and replaces the blue aluminum version #91794 RC10B6.1 Standup Motor Plate. Fits RC10B6.1 series, RC10SC6.1, RC10T6.1, when used with the #91788 gearbox. #WeAreAE #91787 – $21.25 MAP Visit AssociatedElectrics.com/FactoryTeam See more posts […]

Factory Team Large 4oz Shock Fluid Bottles

Factory Team Large 4oz Shock Fluid Bottles

From Factory Team: We super-sized our 11 most popular shock fluid bottles. Racers will appreciate the economical 4oz. (118mL) size–we doubled the size without doubling the price! Available September 2021. #5470 – FT Silicone Shock Fluid, 25wt (275 cSt) – MSRP $9.99 #5472 – FT Silicone Shock Fluid, 30wt (350 cSt) – MSRP $9.99 #5473 […]
Factory Team 5 & 6 Hole 16mm Shock Pistons

Factory Team 5 & 6 Hole 16mm Shock Pistons

From Factory Team: New flat and tapered FT 16mm shock pistons for RC8B3 and RC8T3 series 16mm shocks are available now! Machined from high quality Delrin(R), they add more tuning options to dial in suspension settings. Flat pistons have equal compression and rebound, making them ideal on smoother surfaces. Tapered pistons have less resistance when […]

DR10 Factory Team Front Bulkheads

DR10 Factory Team Front Bulkheads

From Factory Team: Factory Team introduces two new optional front bulkheads for the DR10, SR10, and the RB10. Available in aluminum or brass, these options help improve the durability of your Team Associated ride as well as improving performance. Use these two new front bulkhead options to tune the weight distribution to suit your needs […]
B74 Factory Team Carbon Fiber Chassis Braces

B74 Factory Team Carbon Fiber Chassis Braces

From Factory Team: Team Associated introduced a new Factory Team line of carbon fiber composite option parts for several vehicles. Impregnated with rigid and light carbon fibers inside the injection molded material, these Factory Team parts are the ultimate in high performance. New for the RC10B74, B74.1 and B74.1D are these chassis braces in the […]
1 2 3 4 5 6 … 95
Air Age Media ©