RPM ESC Cage For The Castle Cobra 8 ESC

From RPM:

ESC Cage for the Castle Cobra 8 ESC & Traxxas Vehicles

Our ESC Cage for the Castle Cobra 8 ESC for Traxxas vehicles provides a solid, positive mount. A locked in mount keeps your new and valuable ESC in place even under the most extreme circumstances. The ESC can be run with or without a fan too. Our cage encases the ESC body only, leaving the entire ESC fan free to do its job.

The RPM ESC Cage for the Castle Cobra 8 ESC works with the Traxxas Sledge, Revo 2.0 and the Unlimited Desert Racer. Our ESC Cage fits in the stock location as well.

Each ESC Cage is designed to simplify ESC installation and upkeep of the vehicle. No more struggling with gooey double-sided tape to remove your aftermarket ESC during maintenance either. Transferring the electronics to another car also becomes a breeze.

Additionally, we include two separate On/Off switch mounts for more versatility in positioning the On/Off switch to your liking. The Base Plate also has two On/Off switch mounting locations, increasing its versatility even further.

Each RPM ESC Cage is manufactured from our ridiculously tough blend of engineering grade nylons and backed by our limited lifetime warranty against breakage. Don’t trust your investment to double-sided tape or zip ties. One fail and your ESC will eject like a bullet from a gun! Trust a name you’ve known for decades for bulletproof protection – RPM!

Tech Notes: The RPM ESC Cage for the Cobra 8 ESC is designed to fit in place of stock Traxxas VXL6S ESC’s #3485 and #3485T. Our ESC Cage works with the following Castle part numbers: 010-0172-00, 010-0172-01, 010-0172-02, 010-0172-03 and 010-0172-04. While our ESC Cage will fit a variety of applications, they have been tested and guaranteed to fit the following Traxxas vehicles in stock form only – Sledge, Revo 2.0 and the Unlimited Desert Racer.

#70282 – $13.95

ESC Cage for the Castle Cobra 8 ESC & ARRMA 6S Vehicles

Our ESC Cage for the Castle Cobra 8 ESC provides a solid, positive mount to keep your new and valuable ESC in place even under the most extreme circumstances. Check out this list of features built into each RPM ESC Cage:

• Solid mount without using adhesives or zip-ties.
• The ESC can be run with or without a fan.
• Air channels along the sides allow air movement for better cooling.
• Installation and maintenance simplification.
• Easy swaps of the ESC between vehicles.
• Integrated On / Off switch mount.
• Rolled cage edge so no sharp edges come into contact with your motor wires.
• Integrated stock Cable-Tidy Clip mount.
• Manufactured from our ridiculously tough blend of engineering grade nylons.
• Backed by our limited lifetime warranty against breakage.

Don’t trust your investment to double-sided tape or zip ties. One fail and your ESC will eject like a bullet from a gun! Trust a name you’ve known for decades for bulletproof protection – RPM!

Tech Notes: The RPM ESC Cage for the Cobra 8 ESC is designed to replace the stock ESC Mounting Plate ARRMA #AR320430. Our ESC Cage works with the following Castle part numbers: 010-0172-00, 010-0172-01, 010-0172-02, 010-0172-03 and 010-0172-04. While our ESC Cage will fit a variety of applications, they have been tested on the following ARRMA 6S vehicles in stock form only – Kraton, Mojave, Notorious, Talion, and Typhon that use the #AR320430 stock mounting plate. While the Fireteam uses the same stock mounting plate, space restrictions may prevent our ESC Cage from bolting to the chassis properly.

#70712 – $13.95

Visit RPMRCProducts.com
See more posts about RPM