Locked Up RC 1.9″ Ring Inserts

From Locked Up RC:
We are happy to announce a new lineup of accessories for Locked Up RC bead lock wheels Ring Inserts

Like our popular “Backlight Glow Rings”, these inserts are sandwiched between your existing bead lock ring and wheel.

These Ring Inserts protrude from behind your ring to offer a various amount of color depending on setup.

These inserts can be used with ANY of our 1.9″ bead lock rings.

We are starting with 2 designs in 5 colors and have more designs and colors on the way!

These Ring Inserts protrude from behind your ring to offer a various amount of color depending on setup.

For example, the inner diameter on these Plain Ring Inserts is 34mm.

So when used with an Agile ring (ID 39mm), you see about 2.5mm of color all around.

Specs:

• FDM printed with PLA
• Matte Finish
• 41mm outer diameter

To install:

1. Remove your outer bead lock ring and lay your wheel face up.
2. Place the Insert Ring into the wheel so that the side with the “flange” is at the top.
3. Reattach the bead lock ring and tighten to gently push insert into place.
4. Verify that the bead lock ring is flush against the wheel (check from the sides).
(If the ring is not sitting flush, check for alignment and burrs.)

#2101-BlackSpeck – Plain Black Speck – $3.00
#2101-Lime – Plain Lime – $3.00
#2101-Teal – Plain Teal – $3.00
#2101-Silver – Plain Silver – $3.00
#2101-Scarlet – Plain Scarlet – $3.00
#2102-BlackSpeck – 8 Hole Black Speck – $3.00
#2102-Teal – 8 Hole Teal – $3.00
#2102-Lime – 8 Hole Lime – $3.00
#2102-Silver – 8 Hole Silver – $3.00
#2102-Scarlet – 8 Hole Scarlet – $3.00
Visit LockedUpRC.com
See more posts about Locked Up RC