HOBBYWING 10BL120 G2 ESC

From HOBBYWING:
QuicRun 10BL120 Sensored G2

Best value for money, Easy to use

The new 10BL120 G2, takes the outstanding quality and durability of proven HOBBYWING platforms and makes it even easier to use and setup. The perfect choice for 10th scale setups.

BEC upgrade, stronger driver

The BEC’s continuous output current has been upgraded from 3A to 4A. The maximum current is at 7A, and the output voltage is now 6V/7.4V adjustable. Hobbyist will be able to use high-voltage and powerful servos available on the market with greater control.

Boost/Turbo timing technology

The 10BL120 G2 features adjustable electronic timing. Turbo and Boost can be used to fine tune power delivery and get the most out of your setup. Up to 32 degrees of electronic timing is available.

Note: Boost and Turbo timing cannot be used with a 3S battery to prevent damage.

Combining software and hardware to provide comprehensive protection

The ESC is built using top of the line hardware, and proven software to provide a robust and reliable platform.

This allows for multi level protection that adds to the overall performance and durability.

Abundance programming methods

Multiple programming/tuning methods are supported. Works with the Multifunction LCD programming Box Pro. The Multifunction LCD Programming Box (Non pro). The LED Programming Box, and has on board button/led tuning.

Supports Motor Rotation

The motor rotation is adjustable CW (clockwise) and CCW (counterclockwise), adapting to different chassis.

Specs:

Scale: 1/10th
Brushed/Brushless: BL
Sensored/Sensorless: SD
Waterproof: No
Cont./Peak Current: 120A/760A
Input Voltage: 2-3S Lipo
BEC Output: Switch Mode 6V/7.4V @4A
Input Wires: Black-12AWG-200MMmm*1 / Red–12AWG-200MMmm*1
Output Connectors: Blue-12AWG-200mm*1 Yellow-12AWG-200mm*1 Orange-12AWG-200mm*1
Input Connectors: No
Output Connecotors: No
SET Button on ESC: Supported
LED Program Box: Supported
LCD Pro Program Box: Supported
OTA Programmer: Not Supported
Program Port: Separate Program Port
Fan Size: 25x25x10mm
Output Wires: 5-8.4V
Input Connectors: Powered by BEC
Firmware Upgrade: Not Supported
Size: 43*36.8*32.3mm
Weight: 101.5g (Included wires&connectors)
Motors: Sensorless / Sensored Brushless Motor
Vehicles: 1/10th Touring Cars/Buggies/Drift Cars
KV Rating/T Count: 2SLipo ≥ 4.5T 3SLipo ≥ 10.5T 3650 Size Motor

#30125002
Visit HOBBYWINGDirect.com
See more posts about HOBBYWING