From Fantom Racing:
2S (2-Cell), DUAL BALANCE Charge Lead – 4mm Bullet (charger) to 5mm Bullet x 2 (battery)
Our NEW 2S DUAL BALANCE CHARGE LEAD allows you to balance charge 2 x 2S batteries, at the same time, off of one channel of your charger.
More Power to the People…
FEATURES:
- NEW and IMPROVED in all areas, making these the most professional grade charge leads on the market!
- Hand-Built in the USA! (with parts sourced from the U.S. and China)
- NEW and IMPROVED 4mm bullet connectors on the charger end, for improved longevity and current flow!
- NEW and IMPROVED Thick-Wall Adhesive-Backed Shrink Tubing added to all stress points!
- NEW PRO SERIES printed shrink tubing!
- Inline connectors on battery end, for easier removal from the battery!
- BUILT TO LAST with the highest quality materials and craftsmanship throughout!
- All of our charge leads come with a female JST XH balance tap plug on the charger end and either a male JST XH, JST XH 2S-6S multi-tap board, or 2mm bullet plug on the battery end.
- JST XH balance ports are found on nearly all popular chargers.
- This charge lead works with any brand 2S (2-Cell) LiPo/LiHV battery pack and charger combo using 4mm Bullet and JST XH balance tap (charger end) + 5mm Bullet and 2mm balance tap (battery end).
- Built with high-amp 12awg, 1200 strand wire.
- 24 inches (61 cm) long.
HOW TO USE:
- Plug 4mm Bullet connector (charger end of the harness) into the 4mm Bullet output plug of the charger.
- Plug female JST XH balance connector (charger end of the harness) into balance port of charger (see your charger manual for details).
- BATTERY 1 – Plug your 5mm Bullet connectors (both with white inner shrink tube), of your charge lead, into the 5mm Bullet connector plugs of your battery (red positive / black negative).
- BATTERY 1 – Plug your 2mm Bullet balance connector (with white shrink tube), of your charge lead, into the 2mm Bullet balance connector plug of your battery.
- BATTERY 2 – Plug your 5mm Bullet connectors (both with black inner shrink tube), of your charge lead, into the 5mm Bullet connector plugs of your battery (red positive / black negative).
- BATTERY 2 – Plug your 2mm Bullet balance connector (with black shrink tube), of your charge lead, into the 2mm Bullet balance connector plug of your battery.
- Charge batteries as you normally do.
#FAN26148 – $55.99
2S (2-Cell), DUAL BALANCE Charge Lead – XT90 (charger) to 5mm Bullet x 2 (battery)
Our NEW 2S DUAL BALANCE CHARGE LEAD allows you to balance charge 2 x 2S batteries, at the same time, off of one channel of your charger.
More Power to the People…
FEATURES:
- NEW and IMPROVED in all areas, making these the most professional grade charge leads on the market!
- Hand-Built in the USA! (with parts sourced from the U.S. and China)
- NEW and IMPROVED Thick-Wall Adhesive-Backed Shrink Tubing added to all stress points!
- NEW PRO SERIES printed shrink tubing!
- Inline connectors on battery end, for easier removal from the battery!
- BUILT TO LAST with the highest quality materials and craftsmanship throughout!
- All of our charge leads come with a female JST XH balance tap plug on the charger end and either a male JST XH, JST XH 2S-6S multi-tap board, or 2mm bullet plug on the battery end.
- JST XH balance ports are found on nearly all popular chargers.
- This charge lead works with any brand 2S (2-Cell) LiPo/LiHV battery pack and charger combo using an XT90 connector and JST XH balance tap (charger end) + 5mm Bullet and 2mm balance tap (battery end).
- Built with high-amp 12awg, 1200 strand wire.
- 24 inches (61 cm) long.
HOW TO USE:
- Plug XT90 connector (charger end of the harness) into the XT90 output plug of the charger.
- Plug female JST XH balance connector (charger end of the harness) into balance port of charger (see your charger manual for details).
- BATTERY 1 – Plug your 5mm Bullet connectors (both with white inner shrink tube), of your charge lead, into the 5mm Bullet connector plugs of your battery (red positive / black negative).
- BATTERY 1 – Plug your 2mm Bullet balance connector (with white shrink tube), of your charge lead, into the 2mm Bullet balance connector plug of your battery.
- BATTERY 2 – Plug your 5mm Bullet connectors (both with black inner shrink tube), of your charge lead, into the 5mm Bullet connector plugs of your battery (red positive / black negative).
- BATTERY 2 – Plug your 2mm Bullet balance connector (with black shrink tube), of your charge lead, into the 2mm Bullet balance connector plug of your battery.
- Charge batteries as you normally do.
#FAN26150 – $55.99
2S (2-Cell), DUAL BALANCE Charge Lead – XT60 (charger) to 5mm Bullet x 2 (battery)
Our NEW 2S DUAL BALANCE CHARGE LEAD allows you to balance charge 2 x 2S batteries, at the same time, off of one channel of your charger.
More Power to the People…
FEATURES:
- NEW and IMPROVED in all areas, making these the most professional grade charge leads on the market!
- Hand-Built in the USA! (with parts sourced from the U.S. and China)
- NEW and IMPROVED Thick-Wall Adhesive-Backed Shrink Tubing added to all stress points!
- NEW PRO SERIES printed shrink tubing!
- Inline connectors on battery end, for easier removal from the battery!
- BUILT TO LAST with the highest quality materials and craftsmanship throughout!
- All of our charge leads come with a female JST XH balance tap plug on the charger end and either a male JST XH, JST XH 2S-6S multi-tap board, or 2mm bullet plug on the battery end.
- JST XH balance ports are found on nearly all popular chargers.
- This charge lead works with any brand 2S (2-Cell) LiPo/LiHV battery pack and charger combo using an XT90 connector and JST XH balance tap (charger end) + 5mm Bullet and 2mm balance tap (battery end).
- Built with high-amp 12awg, 1200 strand wire.
- 24 inches (61 cm) long.
HOW TO USE:
- Plug XT90 connector (charger end of the harness) into the XT90 output plug of the charger.
- Plug female JST XH balance connector (charger end of the harness) into balance port of charger (see your charger manual for details).
- BATTERY 1 – Plug your 5mm Bullet connectors (both with white inner shrink tube), of your charge lead, into the 5mm Bullet connector plugs of your battery (red positive / black negative).
- BATTERY 1 – Plug your 2mm Bullet balance connector (with white shrink tube), of your charge lead, into the 2mm Bullet balance connector plug of your battery.
- BATTERY 2 – Plug your 5mm Bullet connectors (both with black inner shrink tube), of your charge lead, into the 5mm Bullet connector plugs of your battery (red positive / black negative).
- BATTERY 2 – Plug your 2mm Bullet balance connector (with black shrink tube), of your charge lead, into the 2mm Bullet balance connector plug of your battery.
- Charge batteries as you normally do.
#FAN26149 – $55.99
Visit FantomRacing.com
See more posts about Fantom Racing