From Factory Team:
Four new Factory Team option parts are for the RC10B74.1 and RC10B74.1D buggy. Dial in the chassis flex and suspension for any track condition!
RC10B74.1 FT Rear Shock Tower, 31mm V2, carbon fiber
This 31mm V2 tower is made to adapt the larger volume 31mm rear shock bodies (#91482, #91578) to your RC10B74.1 or RC10B74.1D for conditions where you need improved jump “flat landing.” The V2 tower is designed to work with the same setup / stroke and 27.5mm shock shaft as the kit, with no up-travel limiters required.
Fits 90026, 90027, 90028
#92256 – $24.65 MAP
RC10B74.1 FT ESC Tray, V2 Chassis, carbon fiber
Upgrade the RC10B74.1 molded ESC tray to carbon fiber, shedding 2 grams of weight (6g vs. 8g) and lowering the ESC at only 1.5mm thick. Compatible with RC10B74.1 or RC10B74.1D.
Fits 90027, 90028
#92259 – $16.99 MSRP
RC10B74.1 FT Flex Chassis Brace Support Set, 2.0mm, carbon fiber
The “Flex” chassis brace design is narrowed along the center line to 5mm for additional torsional flex. The additional flex is an advantage on bumpy dirt tracks or uneven, multi-surface outdoor turf tracks. This is the most flexible chassis option for the RC10B74.1 series.
Fits 90027, 90028
#92283 – $18.99 MSRP
RC10B74.1 Chassis Brace Support Set, 2.0mm, carbon fiber
The carbon fiber chassis brace supports in 2.0mm are a more rigid option than the kit G10 chassis brace support, used for high traction or when racers want to tune out traction.
Fits 90027, 90028
#92284 – $18.99 MSRP
#WeAreAE
Visit AssociatedElectrics.com/FactoryTeam
See more posts about Factory Team