Exotek Option Parts For The Traxxas Slash 4×4 & Rally

From Exotek Racing:

Carbon Fiber Front Shock Tower For The Slash 4×4 & Rally

Factory racing style carbon fiber shock tower for the Slash 4×4, LCG 4X4 and Stampede 4×4. Extra heavy duty 4mm thick glossy carbon fiber. Includes special alloy shock posts and body mount posts and hardware.

Stiffer than the plastic shock towers and much lighter than alloy towers.

Compatibility:

• SLASH 4X4
• RALLY

#2214 – $35.95 MSRP

Carbon Fiber Rear Shock Tower For The Slash 4×4 & Rally

Factory racing style carbon fiber shock tower for the Slash 4×4, LCG 4X4 and Stampede 4×4. Extra heavy duty 4mm thick glossy carbon fiber. Includes special alloy shock posts and body mount posts and hardware.

Stiffer than the plastic shock towers and much lighter than alloy towers.

Compatibility;

• SLASH 4X4
• RALLY

#2213 – $35.95 MSRP

HD 65mm CVD Set For The 1/10 Traxxas Rally

Heavy duty hardened steel complete CVD axle sets and diff cups for the rear of the 1/10 Traxxas Rally.

Reduced parts count and all steel construction insures reliable racing without fear of deforming or popping out the stock plastic axle sets.

The new diff cups uses 2 set screws instead of the straight pin to remove all of the slop and reduces vibrations.

New retaining sleeve for improved 2mm pin holding.

Requires blue thread lock and cvd oil or grease- not included.

You may use these 2x12mm pins if replacement cvd pins are needed.

#2224 – $42.95 MSRP

HD 62mm Front CVD Set For The 1/10 Traxxas Rally

Heavy duty hardened steel complete CVD axle sets and diff cups for the front of the 1/10 Traxxas Rally.

Reduced parts count and all steel construction insures reliable racing without fear of deforming or popping out the stock plastic axle sets.

The new diff cups uses 2 set screws instead of the straight pin to remove all of the slop and reduces vibrations.

New retaining sleeve for improved 2mm pin holding.

Requires blue thread lock and cvd oil or grease- not included.

You may use these 2x12mm pins if replacement cvd pins are needed.

#2223 – $42.95 MSRP

Ultra Aluminum Shock Clamping Spring Cups For Traxxas 1/10 Ultra Shocks

We have brought back our original clamping shock cups for Traxxas 1/10 ultra shocks that are included with Slash, Stampede, Hoss, Rally etc.

No more bash or race sessions cut short due a little plastic shock cup disappearing after a tumble thanks to these alloy clamping cups.

Set of 4 machined alloy cups with new vented holes to release loose dirt.

Includes M2x8 screws.

#2219 – $33.95 MSRP
Visit ExotekRacing.com
See more posts about Exotek Racing