Exotek F 1/10 V2 Rubber Front Tires & Tire Sidewall Stickers

From Exotek Racing:

F1 1/10 Belted Rubber Tires V2 Front 36x (Double Red-Soft)

New V2 soft DOUBLE RED 36X (36 celsius) compound with a newly tooled mold that produces a more rounded tread for improved durability versus the v1 front tire.

New redesigned foam inserts for improved fit and performance.

The double red sets are suited for carpet racing and creates more aggressive steering compared to the 38X red fronts.

Designed 100% from the ground up, and taking cues from the new full size F1 wheel disk regulations, we have taken all of the best elements of RC F1 tires from the past and engineered them into the ultimate F1 rubber tire and wheel set up.

On top of that we have contracted to have these produced by the premier RC rubber touring car tire factory in Japan, using premium touring car rubber compounds and nylon for wheels.

Our front tires are designed with a wide profile for maximum contact patch while the sidewalls are designed with 2 different sidewall diameters. The larger inner diameter serves two purposes- 1. Larger diameter inner wheel gives more suspension pin clearance and would allow for longer front springs and pins designs in the future for increased front end dampening. 2. The inner sidewall becomes slightly stiffer than the outer sidewall. The effect generates less ‘twitchiness’ at low speeds while increasing front bite at higher corner speeds as the tire load spreads to the outer ‘softer’ tire sidewall.

To top it off, special heavy duty nylon wheel decals are included for that finishing scale look!

Notes: for experienced racers only. Gluing and assembly is required (instructions included).

Sold as 1 pair of rubber tire with foam inserts, rear wheels not included and sold separately.

#2199 – $24.95 MSRP

F1 1/10 Rubber Tires V2 Front 38x (Red-Medium)

New V2 MEDIUM RED 38X (38 celsius) compound with a newly tooled mold that produces a more rounded tread for improved durability versus the v1 front tire.

New redesigned foam inserts for improved fit and performance.

The red sets are suited for carpet racing and high grip asphalt racing and creates more aggressive steering compared to the 40X yellow fronts.

Designed 100% from the ground up, and taking cues from the new full size F1 wheel disk regulations, we have taken all of the best elements of RC F1 tires from the past and engineered them into the ultimate F1 rubber tire and wheel set up.

On top of that we have contracted to have these produced by the premier RC rubber touring car tire factory in Japan, using premium touring car rubber compounds and nylon for wheels.

Our front tires are designed with a wide profile for maximum contact patch while the sidewalls are designed with 2 different sidewall diameters. The larger inner diameter serves two purposes- 1. Larger diameter inner wheel gives more suspension pin clearance and would allow for longer front springs and pins designs in the future for increased front end dampening. 2. The inner sidewall becomes slightly stiffer than the outer sidewall. The effect generates less ‘twitchiness’ at low speeds while increasing front bite at higher corner speeds as the tire load spreads to the outer ‘softer’ tire sidewall.

To top it off, special heavy duty nylon wheel decals are included for that finishing scale look!

Notes: For experienced racers only. Gluing and assembly is required (instructions included).

Sold as 1 pair of rubber tire with foam inserts- rear wheels not included and sold separately.

#2194 – $24.95 MSRP

F1 1/10 Rubber Tires V2 Front 40x (Yellow-Firm)

New V2 FIRM Yellow 40X (40 celsius) compound with a newly tooled mold that produces a more rounded tread for improved durability versus the v1 front tire.

New redesigned foam inserts for improved fit and performance.

The yellow sets are best suited for hot asphalt racing weather or low grip tracks and creates less aggressive steering compared to the 38X RED fronts.

Designed 100% from the ground up, and taking cues from the new full size F1 wheel disk regulations, we have taken all of the best elements of RC F1 tires from the past and engineered them into the ultimate F1 rubber tire and wheel set up.

On top of that we have contracted to have these produced by the premier RC rubber touring car tire factory in Japan, using premium touring car rubber compounds and nylon for wheels.

Our front tires are designed with a wide profile for maximum contact patch while the sidewalls are designed with 2 different sidewall diameters. The larger inner diameter serves two purposes- 1. Larger diameter inner wheel gives more suspension pin clearance and would allow for longer front springs and pins designs in the future for increased front end dampening. 2. The inner sidewall becomes slightly stiffer than the outer sidewall. The effect generates less ‘twitchiness’ at low speeds while increasing front bite at higher corner speeds as the tire load spreads to the outer ‘softer’ tire sidewall.

To top it off, special heavy duty nylon wheel decals are included for that finishing scale look!

Notes: For experienced racers only. Gluing and assembly is required (instructions included).

Sold as 1 pair of rubber tire with foam inserts- rear wheels not included and sold separately.

#2193 – $24.95 MSRP

F1 Tire Sidewall Stickers

Replacement vinyl side wall stickers for Exotek F1 tires or similar sizes.

Includes 4 stickers made of heavy duty vinyl with vibrant colors for easier car visibility.

Dimensions- 40mm ID x 50.5mm OD

Instructions- clean tires thoroughly with alcohol rub or similar and then apply sticker. Use quick heat to set the sticker then rub to firmly attach it to the tire.

#2195 – F1 Tire Yellow Sidewall Stickers – $6.95 MSRP
#2196 – F1 Tire Red Sidewall Stickers – $6.95 MSRP
Visit ExotekRacing.com
See more posts about Exotek Racing