Exotek B6.x, T6.x & SC6.x Option Parts (UPDATED)

From Exotek Racing:

B6.3 FLITE FRONT AXLES, TITANIUM

Precision machined premium titanium front axle set for the B6.3, B6.2 and B6.1 series.

At only 4.5 grams per pair, these axles are lightweight but also stronger than the stock alloy pieces.

Rounded and angled hex profile makes wheel installation extra quick and easy.

#2038 – $27.95 MSRP

B6.3 T6 SC6 LAYDOWN/BACK MOTOR PLATE, 2 COLOR AN

Stealthy 2 color anodized 7075 motor heatsink for the B6.3-B6.1 T6.1 SC6.1.

Customized polished black base with blue chamfered accents goes great with your stock plastic parts or after market blue parts.

The black motor plate helps reduce your motor temps while the built in gear cover is stronger than the stock plastic cover to insure that the body does not press the cover onto the spur gear in hard tumbles.

Also, the alloy material is kept in place around the motor and bolt screws to resist excess motor plate flex or bending but machined out elsewhere to reduce its weight to 11gr each.

Lastly, the backside spacers are machined into the plate to provide more secure mounting to the gearbox.

2039 – $19.95 MSRP

B6.3 T6 SC6 7075 STEERING RACK, 2 COLOR ANO.

Stealthy 2 color anodized alloy steering rack for the B6.3-B6.1, T6.1 and SC6.1 series.

Customized polished black base with blue chamfered accents goes great with your stock plastic parts or after market blue parts. And the alloy construction insures precise steering input and heavy duty long lasting performance.

#2040 – $19.95 MSRP

B6.3 T6 SC6 7075 STEERING CRANKS, 2 COLOR ANO. 1 PAIR

#2035 – $25.95 MSRP

B6.3 T6 SC6 TITANIUM SLIPPER SHAFT

Lightweight polished titanium slipper bolt for the B6.3-B6.1 T6.1 and SC6.1 series.

Almost half the weight of the stock bolt at 2.2gr, this titanium bolt lightens your rotating mass and lowers your CG.

Direct fit on the stock laydown top shaft and slipper and uses the stock slipper pin and hardware.

#2041 – $10.95 MSRP

B6.3 T6 SC6 7075 REAR BALL STUD MOUNT, 2 COLOR ANODIZED

Stealthy 2 color anodized 7075 alloy rear ball stud mount for the B6.3-B6.1 T6.1 and SC6.1 series.

Customized polished black base with blue chamfered accents goes great with your stock plastic parts or after market blue parts.

#2042 – $15.95 MSRP

B6.3 T6 SC6 FRONT CAMBER MOUNT, 7075 2 COLOR ANODIZED

For all B6, T6 and SC6 series.

Heavy duty 7075 alloy front bulkhead with our popular 2 color anodizing treatment.

Intricately machined to reduce its weight to only 15 grams (only 4 more than stock) while insuring its heavy duty construction.

Note- use blue threadlock for steering crank screws (don’t over tighten).

#2043 – $27.95 MSRP

B6.3 HD FRONT BULKHEAD, 7075 2 COLOR ANODIZED

Heavy duty, 7075 alloy constructed 10gr front bulkhead for the B6.3-B6.1, T6.1, SC6.1 and all ‘6’ series Associated 2wd buggies and trucks..

Bulkhead has 2 settings for kick up- 25° and 30°, depending on which direction it’s mounted.

Customized polished black base with blue chamfered accents goes great with your stock plastic parts or after market blue parts.

#2044 – $24.95 MSRP

B6.3 7075 WING MOUNTS, 2 COLOR ANO. 1 PAIR

Heavy duty 7075 alloy wing mounts for the B6.3 – B6 series. Extra durable but machined to be lightweight (10gr total) and uses the stock wing spacer and hardware to mount your wing.

Stealthy black polished base with blue chamfered accents goes great with your stock plastic parts or after market blue parts.

Excellent with Exotek wing buttons!

#2045 – $33.95 MSRP
Visit ExotekRacing.com
See more posts about Exotek Racing