Drag Slash Custom Build [VIDEO]

From Traxxas:
Model/Parts Used:

Slash VXL w/On-Board Audio
Funny Car Wheels/Tires (rear)
Front Wheels
Stub Axles (rear)
Tires, street slicks (front)
Suspension arms (rear)
Bandit Camber Links
Bandit Half-shaft axles
Turnbuckles, toe-links
Front bumper
Wheelie bar assembly
Button-head screws (3x20mm)
Shock Rebuild Kit
Front Axles
Suspension Pin Set
Button-head screws (3x25mm)
Lock nuts (3mm)
Double-sided adhesive (for OBA sound module)
Blue Aluminum Wheels for Wheelie Bar
Shoulder screws

Aftermarket Parts:

14mm Wheel Hexes (needed if using #6968 Funny Car wheels)
Compatible RC body
Magnetic Body Mounting Kit

Tools Used:

1.5mm, 2mm, & 2.5mm hex tools
5.5mm & 7mm nut drivers
Needle nose pliers
Hobby knife
Electric drill
2mm, 2.5mm, & 1/8in drill bits
Body reamer
RC body paint
RC tire glue
All-purpose cleaner
4mm wrench
Small flathead screwdriver
Side cutters
RC body scissors (curved & straight)
U-joint wrench
Sheet of paper (for painting)
Permanent marker (to mark position for OBA speakers)
Table vise
Dremel tool with cutting disk and sanding drum
Microfiber cloth
Safety glasses

Wear proper safety goggles and use caution when working with rotary tools or general hobby tools. This project build should only be performed with the supervision of a responsible and knowledgeable adult.
Visit Traxxas.com
See more posts about Traxxas

Subscribe today with a Digital Edition subscription or Print + Digital combo!