Choosing the Right LiPo—What is Best for You?

Choosing the Right LiPo—What is Best for You?

It is hard to believe, but just a few short years ago, Lithium-ion polymer (LiPo) batteries were new to the industry. Since then, not only have LiPo’s come to the forefront, but they are partially responsible for resurrecting electric RC altogether. Li-Po’s, compared to the NiMH technology they replaced, are lighter, deliver more linear current, have higher capacity, last through many more cycles, and are a lot more user-friendly. If you are choosing your first LiPo pack—or are thinking about investing in another—here are some important variables that you will find among packs on the market.


When selecting a Li-Po pack, the most important variable is voltage, which determined by the number of cells in series. The most common LiPo application is a 7.4V (2S) pack, which most closely mimics the voltage used in an old-school 6-cell NiMH pack. If you are trying to achieve insane speeds, however, or run a large-scale electric vehicle, an 11.1V (3S) or greater may be a better fit. Most of the time, you are limited by the ESC capabilities and room on the chassis. Do some research and chose to correct voltage for your vehicle.


Simply put, capacity—expressed in mAH—deterimes the potential runtime of a LiPo. Capacity may be determined by increasing the number of cells in parallel. Assuming the cells are identical, a 3P battery should have a higher capacity than a 2P battery. Higher capacity batteries are generally larger and heavier than lower capacity, so a 8000mAh pack may not necessarily fit in your vehicle. In general, chose the highest capacity battery that will fit comfortably on the chassis. 


Since a LiPo pack is made of multiple, smaller LiPo cells, they all must work together in harmony. Although their synchronization is pretty consistent, the cells do not necessarily charge and discharge equally. Some packs have balancing ports which allow for the use of a balancer while charging. The balancer addresses each cell individually and ‘balances’ the charge in each cell. There are various balancers and ports on the market, so make sure to purchase the correct type for the battery, although not all batteries are balancer-compatible.

Battery Case

LiPo cells themselves are flexible and delicate. They are not rigid like sub-c type batteries and require supplementary protection. Some packs offer more protection than others. Most packs on the market use a rigid plastic case to protect the internal cells—where some use a thinner more flexible case. If given the choice, use the most rigid protection possible. Also, some cases are designed for use in certain vehicles. Most cases are rectangular and have corners, but some cases—designed for cars that use stick-type sub-c packs—have more rounded edges that fit better in the chassis.


Many LiPo packs use wires connected to Zero Loss plugs, which then plug into the battery. These are generally a better option than a pack which doesn’t use Zero Loss plugs, because unlike sub-c cells, LiPo’s are NOT rebuildable. So if a wire frays, it needs to be replaced, and if you don’t have replaceable wires the pack is essentially ruined.


It wasn’t long ago that there were only two options for battery connectors: Tamiya-style and Deans Plugs. Tamiya-style connectors are notoriously terrible, and could never handle high-current applications—leaving Deans plugs to pick up the slack. Although Deans Plugs are still among the best on the market, Losi and Traxxas also produce high-end connectors that can handle high-draw LiPo applications. When selecting your LiPo pack, chose whichever plugs that will work best—as long as they aren’t Tamiya plugs.


A pack’s “C-rating” refers to continuous discharge potential. The higher the C-rating, the more Amps are available for discharge, and in turn, acceleration improves. But as tempting as it is, do not assume off the bat that a 30C battery will perform better than a 25C. Unless you are running a high RPM (kV) motor, you will never need anything more than 25C to begin with. And even if you are running a hot setup, as most racers know, more speed does not necessarily mean lower lap times. Only focus on C-rating if you are looking for additional ways to make your already fast car a little faster at high RPM.

Although LiPo technology is relatively new to our industry, it spawned from the need for better cell phone and laptop batteries. The RC car industry has always done a great job in adapting new technologies for the RC realm. Now, there are a number of different Li-Po batteries on the market, but they all share the same lingo. If you are looking to purchase a new LiPo pack, do some basic research, and chose the best pack for job.

Never miss an issue of RC Car Action!

Subscribe today with a Digital Edition subscription or Print + Digital combo!

Updated: July 21, 2015 — 4:40 PM


Add a Comment
  1. Hi I am getting my first Losi Ten Scte and I want to choose the right pack. Lotta racers say to choose your battery basically how big your motor is. Some say choose a pack on how much amps your vehicle draws by using a logging device that can tell me how much my rc car is drawing amps at startup in the turns and straightaways. This is a bit confusing for me I know that I am first using my car right out of the box before I modify it so I am using stock parts (on my Losi Scte) My question is what should be my first battery for my RTR Losi Scte?

  2. Thank you so much for the info! Great overview and exactly what I needed to know. I only have two questions left: and .

    How do I know which C-rating is right for my car (Link below)?
    If I understand you correctly, higher C-rating means faster… but it might make it harder to handle/lose traction more? Also, even a 20C battery I looked at says (128A) continuous discharge… Seems kinda high?

    How do I know which connectors are compatible to the battery pack/car?
    My ESC says Kyosho connector. Another site says standard connector… Do I have to switch connectors on something?

    ESC: BLC-40C 40A with Kyosho type connector
    •ESC Specs: ◦Input Voltage: 7.2V NiMh – 7.4-11.1V LiPo
    Maximum Output: 360/40sec, 60A (at 25°C) 54A (at 70°C) under good ventilation

    Thunder Tiger Sparrow Hawk XXB

    I am new to RC cars, but I’m a long time RC runner: boats, planes, helis ect.

  3. i have a question about all batteries, which batteries can aperson travel with on a plane. i have lips and my son has NIMH bastteries and would like to trvael with them but not sure if we could. i see racers go all over the world but a lot of their stuff is provided or atleast i think so, can these batteries go on airplanes, what are the requirements. do they go under the plane or in your carry-on, how do i pack them?

Leave a Reply to Warren Cancel reply

Your email address will not be published. Required fields are marked *

Air Age Media © 2022