CEN Racing M-Sport Puma Rally1 RTR 1/8 4WD Brushless Rally Car [VIDEO]

CEN Racing M-Sport Puma Rally1 RTR 1/8 4WD Brushless Rally Car [VIDEO]

RC Car Action - RC Cars & Trucks | CEN Racing M-Sport Puma Rally1 RTR 1/8 4WD Brushless Rally Car [VIDEO]

RC Car Action - RC Cars & Trucks | CEN Racing M-Sport Puma Rally1 RTR 1/8 4WD Brushless Rally Car [VIDEO]

RC Car Action - RC Cars & Trucks | CEN Racing M-Sport Puma Rally1 RTR 1/8 4WD Brushless Rally Car [VIDEO]

From CEN Racing:

Features:

ESC

  • 100A WP-MAX10-SCT-100A-3S RTR Sensorless with T-Plug (powered by HobbyWing).
  • 2-3S Li-po (Lithium-polymer) or 6-9 Cell Ni-Mh Batteries.
  • Water-Proof and Dust-Proof for All Weather.
  • Super Internal Switch-Mode BEC with 6V / 7.4V for Usage with High Voltage Servo.
  • Built-In Capacitor Module.
  • Automatic Throttle Range Calibration.
  • Low Voltage Cut-Off Protection for Li-Po and NiMH Battery.
  • Over-Heat Protection and Throttle Signal Loss Protection.
  • 5 Levels of acceleration/punch.
  • 9 Levels of maximum brake force.

Motor

  • CEN Racing High Performance 3658 3000KV Brushless Motor (Sensorless).

Servo

  • 12Kg Metal Gear Servo (By Savox).
  • 4.8V 0.26 sec/60° 10.0 kg-cm.
  • 6.0V 0.23 sec/60° 12.0 kg-cm.
  • With 25T Horn Gear Spline.

Radio System

  • AMP-30 TX 3-Channel Transmitter.
  • Frequencies: 2.4GHz.
  • Digital Trimming.
  • Steering Dual-Rate (ST D/R) Adjustment.
  • End Point Adjustment (EPA).
  • Build in Failsafe.
  • Power Supply: 4 AA Alkaline (Not Included).

AMP30 RX 3-Channel Receiver.

  • Frequency: 2.4GHz.
  • Power Supply: DC 4.8 ~ 6.0V.
  • Dimensions: 1.35” (L) x 0.72” (W) x 0.53” (H).

Body

  • Official Licensed 2023 M-Sport Ford Puma Rally 1 Edition
  • Fully Detailed Injection-Molded Body Accessories Body Details
  • Size: Length 20.08inches (510mm) / Width 9.45 inches (240mm)

Chassis

  • 3mm Aluminum Chassis
  • Front and Rear 3mm Aluminum Shock Towers
  • Aluminum Arm Brace
  • Full Precision Ball Bearing Support
  • Wider Body Mount Positions for Better Support
  • Front Skid plate with Durable Foam Bumper
  • Injection-Molded Rear Diffuser
  • Easy Access Battery Tray
  • Battery Tray Size 142mm x 48mm

Suspension

  • Aerodynamic Lower Arm Suspension Design
  • Big Bore Oil Filled Adjustable Coil Over Shocks
  • 12mm Over Size Shock Body with 3mm Hardened Steel Polished Shaft
  • Racing Spring
  • Adjustable Turnbuckles
  • Adjustable Wheelbase +/6mm

Gear Ratio

  • Spur / Pinion 46/14T 3.29:1
  • Ring & Pinion 40/17T 2.35:1

Drivetrain

  • Full Time 4-Wheels Drive
  • Center Shaft Drivetrain for more power transferred to the wheels
  • Metal Transmission Gears
  • Aluminum Adjustable Motor Mount
  • Oil Filled Two Differential Drive System
  • Center Direct Drive
  • Hight Efficient Transmission System
  • 6 Gear Bevel Gear Type Differential
  • Front / Rear Harden Steel Dog Bone and outdrives

Wheel

  • High Impact & Light Weight WRC Racing Wheel 56 X 35.50 mm.

Tires

  • High Performance Racing Rubber Compound Tires 56 x 80 x 35.50 mm.

Specs

  • Chassis Length: 18.11 inches (460mm)
  • Chassis Width: 9.06 inches (230mm)
  • Wheelbase: 11.80 inches (300mm)
  • Ground Clearance: 0.98 inches (25mm)
  • Weight: 5.51 lb. 2.5kg

#8999 – $459.00
Visit CENRacingUSA.com
See more posts about CEN Racing
RC Car Action - RC Cars & Trucks | CEN Racing M-Sport Puma Rally1 RTR 1/8 4WD Brushless Rally Car [VIDEO]

RC Car Action - RC Cars & Trucks | CEN Racing M-Sport Puma Rally1 RTR 1/8 4WD Brushless Rally Car [VIDEO]

RC Car Action - RC Cars & Trucks | CEN Racing M-Sport Puma Rally1 RTR 1/8 4WD Brushless Rally Car [VIDEO]

Never miss an issue of RC Car Action!

Subscribe today with a Digital Edition subscription or Print + Digital combo!

 

Updated: August 18, 2023 — 9:39 AM
Air Age Media ©