This belt driven 4WD car is almost ready to run and features an adjustable front ball diff and locked rear axle, high torque steering servo, and comes standard with a modified 22t brushed motor. Here’s the full scoop from Hobbyking:
The Mission-D 4WD Drift Car is fully assembled and setup right out of the box. You will simply need to add your own radio system (2CH transmitter & receiver) and 2S 7.4V lipoly battery to be ready to drift!
This chassis features a belt driven 4WD system which is very efficient, low maintenance and really puts the power down to all four wheels. A modified 22T brushed motor and ESC provides plenty of wheel spinning torque while keeping the current draw very low. The chassis utilizes ball bearings throughout, no old-school bushings here. This makes for super smooth and efficient operation.
The Mission-D’s suspension is fully adjustable. The shocks are oil filled and constructed from durable yet lightweight aluminium. You can adjust the shock mounting position, camber/castor (front) and camber (rear). An adjustable ball differential is installed up front with a locked rear axle at the back. All of this, combined with the well thought out electronics mounting and battery placement makes this chassis so well balanced that even a complete newbie can be drifting like a pro in no-time!
Proper hard compound, scale treaded drift tires come pre-installed on 3mm offset racing wheels. The wheel hubs feature a brake rotor and caliper providing the ultimate in scale looks. The body shell comes pre-painted and trimmed, you will simple need to install the wing of your choice (two optional wings included).
Features:
- ARR (Almost Ready to Run), simply add your own radio system and battery
- Highly efficient belt driven 4WD system
- Adjustable front ball diff and locked rear axle
- Modified 22T brushed power system providing excellent torque
- High torque steering servo pre-installed
- Hard compound scale treaded drift tires
- Fully adjustable suspension
- Oil filled aluminium shocks
- Pre-painted/trimmed body shell
- High level of scale detail
Specs:
Overall Length: 390mm
Overall Width: 195mm
Wheelbase: 255mm
Height: 123mm
Motor: Modified 22T brushed (pre-installed)
ESC: Brushed (pre-installed)
Servo: High torque standard size (pre-installed)
Includes:
- 1/10 Mission-D 4WD Drift Car
- Pre-painted/trimmed body shell
- All necessary hardware
- User manual
Requires:
- 2CH Transmitter and Receiver
- 2S 7.4V lipoly battery (hardcase battery recommended)
432000001 – $79.99
[nggallery id=1277]