Hobbyking Mission-D 4WD GTR

Hobbyking Mission-D 4WD GTR

This belt driven 4WD car is almost ready to run and features an adjustable front ball diff and locked rear axle, high torque steering servo, and comes standard with a modified 22t brushed motor. Here’s the full scoop from Hobbyking:

The Mission-D 4WD Drift Car is fully assembled and setup right out of the box. You will simply need to add your own radio system (2CH transmitter & receiver) and 2S 7.4V lipoly battery to be ready to drift!

This chassis features a belt driven 4WD system which is very efficient, low maintenance and really puts the power down to all four wheels. A modified 22T brushed motor and ESC provides plenty of wheel spinning torque while keeping the current draw very low. The chassis utilizes ball bearings throughout, no old-school bushings here. This makes for super smooth and efficient operation.

The Mission-D’s suspension is fully adjustable. The shocks are oil filled and constructed from durable yet lightweight aluminium. You can adjust the shock mounting position, camber/castor (front) and camber (rear). An adjustable ball differential is installed up front with a locked rear axle at the back. All of this, combined with the well thought out electronics mounting and battery placement makes this chassis so well balanced that even a complete newbie can be drifting like a pro in no-time!

Proper hard compound, scale treaded drift tires come pre-installed on 3mm offset racing wheels. The wheel hubs feature a brake rotor and caliper providing the ultimate in scale looks. The body shell comes pre-painted and trimmed, you will simple need to install the wing of your choice (two optional wings included).


  • ARR (Almost Ready to Run), simply add your own radio system and battery
  • Highly efficient belt driven 4WD system
  • Adjustable front ball diff and locked rear axle
  • Modified 22T brushed power system providing excellent torque
  • High torque steering servo pre-installed
  • Hard compound scale treaded drift tires
  • Fully adjustable suspension
  • Oil filled aluminium shocks
  • Pre-painted/trimmed body shell
  • High level of scale detail


Overall Length: 390mm
Overall Width: 195mm
Wheelbase: 255mm
Height: 123mm
Motor: Modified 22T brushed (pre-installed)
ESC: Brushed (pre-installed)
Servo: High torque standard size (pre-installed)


  • 1/10 Mission-D 4WD Drift Car
  • Pre-painted/trimmed body shell
  • All necessary hardware
  • User manual


  • 2CH Transmitter and Receiver
  • 2S 7.4V lipoly battery (hardcase battery recommended)

432000001 – $79.99

[nggallery id=1277]

If you like this article, check out this additional article on HobbyKing.

Never miss an issue of RC Car Action!

Subscribe today with a Digital Edition subscription or Print + Digital combo!


Updated: April 26, 2013 — 9:32 AM
Air Age Media ©