Viper Releases VTX8 V-LINK Software And Version A61 Firmware

Viper Releases VTX8 V-LINK Software And Version A61 Firmware

Viper has released a V-LINK software program for their new VTX8 ESC that will allow you to update the firmware and change the VTX8’s settings. Check out more info in the press release below:

Viper R/C Solutions announces that the V-LINK software program been released for the new VTX8. By using the PCLink cable (6VSPCLINK1) the VTX8 can be attached via USB port to a (Windows based) computer allowing firmware updates and changes to settings via the VLink software.

Embedded in the V-LINK is an updated version of firmware, A61, for the VTX8. Constantly working to improve performance, Viper engineers have updated the firmware to provide more power and improved throttle control using 4 pole motors with a 2S battery. This update will allow racers to use 100% Punch with these motors, something other speed control manufacturers do not recommend.

Racers who own a VTX8, but do not own the PCLink can send their speed controls to Viper for free firmware upgrade. Simply fill out an RMA form and ask for an upgrade to be completed. For those with the cable, the software can be downloaded from our website at:

http://www.viper-rc.com/vtx8.php 7337_564452096910191_729915748_n

If you like this article, check out this additional article on Viper.

Never miss an issue of RC Car Action!

Subscribe today with a Digital Edition subscription or Print + Digital combo!

 

Updated: April 5, 2013 — 4:02 PM
Air Age Media ©