Pro-Line/PROTOform October Releases

RCCARACTION Default Image

Slipstream Clear Body for 8ight-E 2.0

The Slipstream body has quickly become a household name in the high airflow needs of brushed or brushless vehicles. Pro-Line extends the line of the Slipstream design with a dedicated version for the Losi 8ight-E 2.0. High airflow, cooler electronics, and a symmetrical design make the Slipstream body a true performer.

Features:

  • 5 air inlet points for extreme airflow
  • One large outlet so air flow is at a constant
  • Symmetrical design and radius edges for ease of masking when painting
  • Made from .040 extremely durable Lexan® material

What’s included:

  • Slipstream clear body (1)
  • Pro-Line decal sheet (1)
  • Window Mask

#3315-40 Slipstream Clear Body for 8ight-E 2.0 $28.95

Caliber SC 2.2″/3.0″ Tires (2) for Slash®*, Slayer®, Blitz & SC10 Front or Rear

Short course trucks have become class leaders at many tracks around the nation. What’s more is there’s a class for everyone. Stock class requires you to run stock tires while mod classes pretty much allow you to run whatever you want. Well, for those of you that want the most out of your short courser, the 1:8 superstar Caliber tread design is ready for you to leave stock in the dirt.

The Caliber takes tire technology to the next level by optimizing traction, control, balance, and tire wear with its dual-stage design. The smaller top pin penetrates through loose dirt while delivering unbelievable side and forward bite. The base pin works as a support for the top pin while acting as a dual-stage design once the top pin is worn down. You can rely on the base pin for greater tread life wear and it works well on those tracks that are prone to blue-groove or have a super clean surface.

Tire Features:

  • Dual-stage pin design for exceptional tread life
  • Small top pin for light to heavy loose dirt
  • Base pin extraordinary on hard-packed/blue-groove surfaces
  • Square-lug technology throughout the tread design
  • Non directional tread design
  • Available in World Championship/extremely proprietary M2 and M3 compounds
  • Internal sidewall ringing for lateral support and increased cornering control
  • Long life/lightweight molded foam inserts included (smaller stamped foam included for those using stock Traxxas® wheels)

What’s Included:

  • Caliber SC tire (2)
  • Molded foam inserts (2)
  • Supplemental inner stamped foam inserts (2)

Tire Specs

Height: 4.3″ (109mm)
Width: 1.7″ (43mm)
Mounting Bead: 2.2″ (Outer) x 3.0″ (Inner)
(56mm x 76mm)
Weight: 64g (M2)

#1156-01 (M2) Pair (2pc) $23.95
#1156-02 (M3) Pair (2pc) $23.95

Split Six 2.2″/3.0″ One-Piece Rear Wheels (2) for Slash®

The Split Six design is the staple look of short course vehicles. Until now, it’s only been available in a 3 piece bead-loc design. Now, Pro-Line offers a lightweight one-piece glueable design that’s more affordable and completely performance driven for Slash® and Blitz.

Wheel Features:

  • Lightweight one-piece design
  • 2.2” outer bead and 3.0” inner bead
  • Simulated Bead-Loc ring
  • Wheel made from high-strength, durable DuPont® nylon material
  • For use on Slash® front (#2720) and Slash rear or Blitz front/rear (#2721)
  • Same track width as stock wheels
  • A deep, sating black finish on all Split Six wheels.

What’s included:

  • Split Six wheels (2)

SPECS:

Outer Diameter: 2.2″ (56mm)
Inner Diameter: 3.0″ (76mm)

#2721-02 Black Pair (2pc) $9.49

Road Rage Street Tires Unmounted or Mounted on Titus Bead-Loc Wheels (2) for 1:16 E-REVO®

1:10 and 1:16 fans you have an option for the street and it’s called Road Rage. A fitting name as brushless systems have excelled the performance of electric cars over the past few years and with 50mph plus speeds Road Rage is just what you have when you combine phenomenal speeds in such small packages.

Tire Features:

  • Greatly increases traction on concrete, blacktop and ultra hard packed surfaces
  • Deep v-tread whisks away dirt and dust to give you optimal traction with the surface below
  • Low profile sidewall make cornering more predictable and straight line traction explosive
  • Made from M2 (Medium) extremely proprietary World Championship winning compound

What’s included:

  • Road Rage tires (2)
  • High Impact Foam Inserts (2)

Premounted

Looking for more stability and traction on the street? The Road Rage mounted on Titus 2.2” wheels give you just that. Stability is achieved by a ½” wider stance on each side of the vehicle with the Titus wheels. To complete the package, Road Rage’s bring the element of control, agility and overall performance to your little E-REVO® with Pro-Line proprietary all-terrain design and high performance M2 rubber compound.

Road Rage Features:

  • Made from medium M2 compound
  • Aggressive street v-tread made to carve through dust and water while holding dry surfaces with ease
  • 3.4” Oversized tire diameter delivers higher speed passes and greater control
  • An exclusive best seller design only from Pro-Line
  • Readers’ Choice Award recepient

Titus Wheel Features:

  • New 3-Piece easy to assemble wheel design
  • Aluminum die-cast bead-loc with Pro-Line USA insignia
  • Extremely detailed injection molded wheel design
  • Extremely true finish
  • Pre-ventilation included

#1102-00 (M2 Medium) Pair (2) for 1:16 E-REVO® $14.95
#1102-13 (M2 Medium) Mounted on Black/Black Titus Bead-Loc Wheels Pair (2) for 1:16 E-REVO® $39.95

Titus 2.2″ Bead-Loc Front or Rear Wheels Without Weights (2) for 12mm Crawler Hex

Check it out 1:16 Mini E-Revo and Rock Crawling, Pro-Line now offers you a non-weighted version of the popular Titus wheel.

Features:

  • New 3-Piece easy to assemble wheel design
  • Aluminum die-cast bead-loc with Pro-Line USA insignia
  • Extremely detailed injection molded wheel design available in black or chrome
  • Extremely true finish
  • 12mm hex for use with traditional rock crawling stepped 12mm hexes, 1:16 Mini E-Revo 12mm hexes, as well as non-stepped 12mm hexes.
  • Pre ventilation included

What’s included:

  • Chrome or black wheel (2)
  • Bead-locking sleeves (2)
  • Die-Cast bead-loc (2)
  • Screw hardware (24)

Optional Accessories:

  • 12oz, 8oz and 4oz tuner weights complete with weight retainer O-rings. #2713-10 See related products on right.

SPECS:

Outer Diameter: 2.2″ (56mm)
Width: 1.4″ (36mm)
Weight: 69.1g

* With included ring & sleeve

#2713-13 Black/Chrome without weights Pair (2pc) $27.95
#2713-15 Black/Black without weights Pair (2pc) $22.95

Heavy Duty 5B/5T Bead-Loc Rings for 1:5 Front/Rear Wheels (2)

Pro-Line Heavy-Duty rings included on the Split Six wheels are ready for extreme punishment on your 5B or 5T.

Features:

  • Super heavy-duty bead design that protects the sidewall of the tire
  • Screws are recessed so damage to the head of the screw is drastically reduced
  • Stylish recessed design gives the bead-locs a complementary look to the sidewall of any tire
  • Made from durable nylon black material

What’s included:

  • Outer Ring (2pc)
  • Inner Ring (2pc)
  • Screw Hardware

#2718-21 Black Pair (4pc) $16.95

Type M F1 Retro Clear Body for 1:10 Tamiya F103

The most popular motor racing venue around the globe is without a doubt Formula 1 racing. Here in the R/C world there has been a renewed interest in Formula 1 racing. As a result PROTOform has re-released a couple popular designs from a previous era in the Formula 1’s colorful history. A decade or two ago, the cars racing in Formula 1 were extremely diverse in their shapes and designs. The various teams were not only easy to identify because of sponsor logos, but so many teams had a “signature look” that gradually evolved from year to year. Unlike the ultra functional F1 cars of the last decade, most of the cars in that bygone era were considered to be in a word “beautiful.”

The Type M body replicates on the most distinctive cars of that era. It’s made to fit the ever popular Tamiya 103R F1 chassis. It’s pulled in .030 lexan and comes with protective film.

** The wings and helmet seen in photos are also Tamiya products and are NOT supplied with the body. **

Features:

  • Made from extremely durable .030 Lexan® material
  • Paint-then-Peel protective film

What’s included:

  • Clear Type M Body (1)
  • PROTOform decal sheet (1)

#1518-30 Type M F1 Retro Clear Body for 1:10 Tamiya F103 $19.95

Type B F1 Retro Clear Body for 1:10 Tamiya F103

The re-released PROTOform Type B body replicates one of the first F1 cars to be designed with a “high nose” and a suspended front wing. It turned out to be a championship winning car that influenced the design of many F1 cars since then. This body is made to fit the recently released Tamiya F103RM kit that’s equipped with the proper “high nose/wing” pieces.

The Protoform Type B is pulled in .030 lexan and comes with protective film.
** The wings and helmet seen in photos are also Tamiya products and are NOT supplied with the body. **

Features:

  • Made from extremely durable .030 Lexan® material
  • Paint-then-Peel protective film

What’s included:

  • Clear Type B Body (1)
  • PROTOform decal sheet (1)

#1519-30 Type B F1 Retro Clear Body for 1:10 Tamiya F103 $19.95

Never miss an issue of RC Car Action!

Subscribe today with a Digital Edition subscription or Print + Digital combo!

 

Updated: July 21, 2015 — 5:28 PM
Air Age Media ©