LATEST


Hole Shot VTR 4.0″ Off-Road 1:8 Truck Tires (2) for Front or Rear

Hole Shot VTR 4.0″ Off-Road 1:8 Truck Tires (2) for Front or Rear

The 1:8 Truck class has advanced significantly in the past few years from chassis configurations, suspension, drive train technology and other advancements. Wheels and tires are no exception to this and today, Pro-Line introduces the next generation of wheel and tire combination with the VTR line. Now, the VTR line is just more packs a […]

Novak Low C-Rated Battery Notice

Novak Low C-Rated Battery Notice

Latest from Novak: Due to the growing popularity of Li-Po battery packs, we have received many questions concerning our electronics’ compatibility and performance when used with Li-Po batteries. Here are a few troubleshooting suggestions when using Li-Pos. Batteries that are rated at 20C or lower, generally, cannot sustain their voltage under load, causing a vehicle’s […]
CKRC Crawlers CVD Upgrade for Losi Competition Crawler

CKRC Crawlers CVD Upgrade for Losi Competition Crawler

New from CKRC Crawlers: CKRC’s new Heavy Duty CVD axles are manufactured by the pro’s at MIP. This upgrade is a must have for any Losi competition crawler. CKRC’s new cvd’s are made from 1144 steel and are heat treated to rockwell 40/45. The sizing of the cvd ball, cup, and pins have also been […]

Dynamite 1/8 Buggy, Truggy Wheel/Tire Balancer

Dynamite 1/8 Buggy, Truggy Wheel/Tire Balancer

New from Dynamite: Looking for an easy and affordable way to increase the handling and stability of your 1/8 scale buggy or truggy? Look no further as Dynamites Wheel/Tire balancer makes balancing your wheels/tires a breeze. Engineered specifically for 1/8 scale buggies and truggies, Dynamite’s Wheel/Tire balancer provides an easy way to balance your 1/8 […]
HUDY Power Tool Tips

HUDY Power Tool Tips

New from Hudy: HUDY offers a new range of power tool tips for electric screwdrivers, manufactured from world-renowned HUDY Spring Steel™ and available in most popular sizes. The end of the tips are manually grounded for maximum precision and perfect fit to the fastener, and additionally heat treated and hardened for maximum life. Range of […]

Novak 1,300+ Graded Sintered Tuning Rotor – 12.3mm

Novak 1,300+ Graded Sintered Tuning Rotor – 12.3mm

New from Novak: Novak’s 1,300+ Graded Sintered Tuning Rotors – 12.3mm (#S5952) are magnetized with Novak’s sophisticated magnetizing machine, which boosts the rotor’s grade to 1,300+. These ultra magnetized rotors are graded about 50-100 points higher than traditionally magnetized rotors, according to popular magnetic strengh meters, such as Zubak’s Speed Meter 2™. The rotor’s magnetic […]
Kershaw Designs – E-Revo LCG Chassis V2

Kershaw Designs – E-Revo LCG Chassis V2

The latest from Kershaw Designs: At Kershaw Designs, we’ve been listening. This chassis takes all the great features of the original and incorporates just what you’ve been asking for. 1/2 lb lighter. More clearance for bigger liPo packs. Tighter tolerances and cleaner fit. Features* Sophisticated “uni-body” design that gains rigidity from top and bottom plates. […]

LRP C3-STX Pro 2.4GHz F.H.S.S. 100mV Radio Set

LRP C3-STX Pro 2.4GHz F.H.S.S. 100mV Radio Set

New from LRP: Fast, Safe, Reliable – is what describes the new LRP transmitter at its best! With the C3-STX Pro 2.4GHz F.H.S.S. LRP is presenting one of the most advanced and successful transmitters of today. This transmitter with all its high-tech features and specially selected electronic components is one of the best transmitters currently […]
SIRIO .12 engine XXX V

SIRIO .12 engine XXX V

The latest from Team Epic: This is the latest evolution of the very successful XXX engine. With updated crankcase with better strength and durability, it will provide you the best performance possible. It will last longer in the long run and through “very hard” heat conditions. Ceramic bearings and ultimate construction technology will give you […]

Z-Car ZMXT-8 1/8 Nitro Truggy Pro Kit

Z-Car ZMXT-8 1/8 Nitro Truggy Pro Kit

Distributed exclusively by Global Hobby:   ZMXT-8 1/8 Nitro Truggy Pro KitZ-Car, created by the owner of SH Engines, was created for 1 thing: Make Championship Top-Tier 1/8th Off Road Race Cars. From the placement of the factory to the test track that is built at the facility, from the CEO to every factory team […]
Air Age Media ©