RCCA Membership 900x250
Log In

Mugen MTX-6R 1/10 Nitro 4WD Touring Car

Mugen MTX-6R 1/10 Nitro 4WD Touring Car

mugen-mtx-6r-1_10-nitro-4wd-touring-car-6 mugen-mtx-6r-1_10-nitro-4wd-touring-car-5 mugen-mtx-6r-1_10-nitro-4wd-touring-car-4

From Mugen:

Mugen Seiki is proud to introduce the MTX-6R 1/10th Nitro Touring Car. The MTX-6R kit has many high-end improvements to suspension, steering and durability to create the ultimate 1/10th nitro Touring Car.

Mugen Seiki concentrated on the making the suspension on the MTX-6R even better with a new chassis that allows you to easily mount two center weights to improve stability. The chassis also has improved rigidity that makes the MTX-6R more precise and increases rear traction. The new MTX-6R is also outfitted with new thickened bulkhead brace to help with rear-end stability. The new upper rear bulkhead allows you to use a longer upper arm to improve stability. The new front and rear lower arms are made with a new material to improve steering response and durability. The new front shock tower is stronger and improves stability while corning. The new front bumper allows you to adjust the weight balance of the vehicle. Overall the New Mugen Seiki MTX-6R is the ultimate 1/10th Nitro Tour Car.

MTX-6R Features:

T2409 Chassis:

The MTX-6R features a new chassis that allows you to easily mount two center weights (optional weights) to improve stability on high traction tracks. The chassis also has improved rigidity, which makes the vehicle more precise, predictable and increases rear traction.

T2150 New Thickened Bulkhead Brace:

The new bulkhead brace help improve the rear stability of the vehicle.

T2151 Rear Lower Arm Mount B:

The new lower rear arm mount holds the position of the rear tire properly and improves corning.

T2149L&R Rear Upper Bulkhead:

The new upper rear bulkhead mounts the upper arm to a new position and allows you to use a long upper arm to improve stability on high-speed tracks.

T2118-B Front Lower Arm:

The new front lower arms are made with a new harder material to improve steering response and stability during corning. The new material also improves durability and traction.

T2119-B Rear Lower Arm:

The new rear lower arms are made with a harder material to traction and stability.

T2511 New Front Shock Tower:

The new front shock tower is stronger and will reduce flex to improve stability during cornering.

T2402-B Front Bumper:

The front bumper has new mounting holes for the optional front bumper that allow you to adjust the weight balance of the vehicle.

Technical Data:

Length:     380mm
Width:     Max. 200mm adjustable
Wheel Base:     257.5mm~260.5mm adjustable
Tread (F/R):     173mm/169mm
F. Caster Angle:     6.4°~13.8° adjustable
Gear Ratio:     1st. 7.24:1 / 2nd. 4.69:1

Other necessary equipment:

2ch Radio and 2 servos / Receiver / Connecting Cable / Receiver Battery / 12 Class Rear Exhaust Engine / Muffler / Manifold / Manifold Spring / Tire & Wheel  / Air Filter / Engine Starter / Body / Body paint tools / Fuel
Visit MugenRacing.com
See more posts about Mugen

mugen-mtx-6r-1_10-nitro-4wd-touring-car-2 mugen-mtx-6r-1_10-nitro-4wd-touring-car-1 mugen-mtx-6r-1_10-nitro-4wd-touring-car-12 mugen-mtx-6r-1_10-nitro-4wd-touring-car-11 mugen-mtx-6r-1_10-nitro-4wd-touring-car-10 mugen-mtx-6r-1_10-nitro-4wd-touring-car-9 mugen-mtx-6r-1_10-nitro-4wd-touring-car-8 mugen-mtx-6r-1_10-nitro-4wd-touring-car-7 mugen-mtx-6r-1_10-nitro-4wd-touring-car-3

Updated: September 15, 2016 — 12:56 PM
Traxxas XMaxx 600x120
Hobbico Dromida Inner Basher 600x120

Leave a Reply

Your email address will not be published. Required fields are marked *

Airage Media © 2017
WordPress Video Lightbox