RCCA Membership 900x250
Log In

Readers Rides

Custom 6×6 Crawler [READER’S RIDE]

Custom 6×6 Crawler [READER’S RIDE]

Getting a custom 6×6 truck to have the efficiency and range of motion to be a fully capable crawler can be a challenge, but Daniel Anguita wasn’t interested in a shelf-queen, so he put the work in. He grafted two sets of Axial SCX10 frame rails together with aluminum braces for the truck’s backbone. He […]
This Mega-Sized Mini is JET Powered! [READER’S RIDE]

This Mega-Sized Mini is JET Powered! [READER’S RIDE]

Jerome Swift is the proprietor of JS Hobbies and Models, and he envisioned this turbine powered WRC Mini as a fun way to promote his shop. He tells us that it was one of his most complex and challenging builds, which took him a year to complete. Power comes from a JetCat P80 Jet Turbine […]

Ads after 2 posts

Hobbico Inner Basher  600x120

Ads after 6 posts

“Wart Hog” Axial SMT10 Monster Truck [READER’S RIDE]

“Wart Hog” Axial SMT10 Monster Truck [READER’S RIDE]

Jimmy Louis had been waiting years for a decent tube-frame monster truck to come out, so when Axial released their SMT10 he knew he had to have it. He dubbed his “The Warthog” and stuffed it with a Castle Creations SCT controller with a 3600kV motor. He added Boom Racing Type G piggyback shocks with […]
RC4WD TF2 Blackfoot Hybrid [READER’S RIDE]

RC4WD TF2 Blackfoot Hybrid [READER’S RIDE]

Jonathan Mathews’ TF2 is deceptively subtle, but the closer you look the cooler this truck gets. To begin with, there’s the Tamiya Blackfoot body. Look closer and you’ll see that this is an extended cab Ford — something Tamiya never made. So Jonathan and his buddy Jim (who runs a body shop) spliced together two […]

Ads after 2 posts

Ads after 6 posts

Axial Wraith-based Trail Rig [READER’S RIDE]

Axial Wraith-based Trail Rig [READER’S RIDE]

Jason Hope sent us these pics of his new trail rig overlooking the ocean near his home in Pacifica, CA. Its an Axial Wraith with a custom polished aluminum frame and cage.  Power comes via an HPI 15t motor run by a Castle Creations Sidewinder controller. It rolls on metal beadlock wheels with Pro-Line 2.3 […]
Custom 1/8-Scale ’41 Willys [READER’S RIDE]

Custom 1/8-Scale ’41 Willys [READER’S RIDE]

Henry Martinez is a hardcore Chevy guy going back decades — he currently owns a ’57 Nomad and a ’68 El Camino SS396 that he’s done full frame-off restorations on. He says he can’t do as much building and restoring of the full-scale stuff as he’d like anymore, so he’s focused his talents on building […]

Ads after 2 posts

Ads after 6 posts

Hobbico Dromida Inner Basher 600x120
Axial SCX10 II    [READER’S RIDE]

Axial SCX10 II [READER’S RIDE]

Anthony Newman is obviously an Axial fan, as you can see from the pair of Jeeps he sent in. He runs his ‘00 Cherokee-bodied SCX10 on 3S Lipo, powering a 55-turn motor and an Axial AE5 controller with a 6V Castle BEC. He dressed up the exterior with a set of Integy fog lights and Axial’s […]
Vaterra Twin Hammers Trail Truck  [READER’S RIDE]

Vaterra Twin Hammers Trail Truck [READER’S RIDE]

The Vaterra is nominally a desert truck, but Jason Hope’s Twin Hammers spends plenty of time getting muddy on mountain trails near his Pacifica, Callifornia home. The muck looks at home on the Pro-Line ’72 Chevy C10 body done in a rusty beater truck motif by Jason himself. He selected upsized Interco Super Swampers from […]

Ads after 2 posts

Ads after 6 posts

Axial SCX10 with RC4WD Hardbody [READER’S RIDE]

Axial SCX10 with RC4WD Hardbody [READER’S RIDE]

Here’s a beautiful truck in a beautiful setting sent in by Cameron McLean. The chassis is an Axial SCX10-2, dressed up with a 4-door Mojave Hard Body from RC4WD with Customs stripes by Ernesto at URScale banners. Pro-Line supplied the front bumper and 2-inch Light Bar. Pro-Line also delivered the Swamper TSL SX Tires and […]
Custom Chevy K5 Blazer Drag Truck [READER’S RIDE]

Custom Chevy K5 Blazer Drag Truck [READER’S RIDE]

With all the great scale truck hard bodies now on the market, it’s easy to see why Dan Boyle chose one for his latest scale build. But rather than go the traditional truck route, he combined his love of drag racers with RC4WD’s excellent injection-molded K5 Blazer. It sits on a heavily modified Axial Wraith […]

Ads after 2 posts

Ads after 6 posts

Axial Wraith Trail Frog [READER’S RIDE]

Axial Wraith Trail Frog [READER’S RIDE]

Mark Liersch’s list of upgrades reads like a wish-list for anyone into trail and scale. He beefed up the driveline with Rave G5 machined axles and a RC4WD 2-speed transmission. Big-time torque comes courtesy of RC4WD too in the form of a 45-turn motor controlled through an Axial AE5 speed controller on 2S Lipos. A […]
Tamiya Clod Buster Time Machine [READER’S RIDE]

Tamiya Clod Buster Time Machine [READER’S RIDE]

We’ve been on a retro kick lately, and Mike Lohmann’s Clod Buster shows exactly why these old-school rides can be so cool! Mike tells us this is a seriously old-school Clod Buster is one of several that he has done as he relives his youth by collecting all the parts he couldn’t afford back then. He […]
Airage Media © 2017
For all Licensing, Permissions, Awards and Reprint requests please contact our official partner Wright's Media for more information. Please note that Wright's Media is the only authorized company that we’ve partnered with for materials and assets. Wright's Media contact: airage@wrightsmedia.com or (877) 652-5295.
WordPress Video Lightbox