Workbench Essentials: Locking Pliers

Oct 24, 2011 5 Comments by

This week my choice for must-have tool is an oldie but a goodie: Locking pliers. Often referred to as Vice Grips (a name brand), locking pliers are one of those things that simply must be within an arm’s reach at all times if you hope to retain any semblance of sanity. They make so many difficult jobs a complete breeze that it’s really impossible to mention them all here, but I’ll try to hit the high points.

There are several types of locking pliers out there, but the ones I prefer have a good old fashioned adjustment knob on one grip handle and a release lever on the other. Forget those auto locking types; you want the original. A well made set of locking pliers will allow you to dial in a rock solid, no-slip grip on pretty much anything, and as an added bonus your hands won’t cramp up like they do with regular pliers.

Ok great, they sound neat but what are they good for? Well, my single favorite use for locking pliers is assembling shock absorbers. You know that tricky step when you need to screw an eyelet on the end of a polished and freshly-oiled shock shaft? Just grab a small scrap of cardboard or folded up paper (to prevent damaging the finish on the shaft) and lock your pliers firmly into place. Presto – no more annoyingly slippery shock shafts that refuse to cooperate. Another favorite use of locking pliers is when I need to cut down a bolt with my Dremel tool. Just lock onto the threads of the bolt to be cut (again using cardboard to avoid marring the threads) and cut away. This allows for a steady but easily-adjustable hold on your bolt that does not involve burning the heck out of your fingers.

Other hugely useful applications for the almighty locking pliers include building turnbuckles, holding a nut you don’t have a socket for, and clamping two parts together while glue or epoxy sets. Need a third hand for some soldering? Locking pliers. Need a little more leverage with your Allen key and don’t have a hex wrench? Locking pliers. Trying to hold a tiny lock nut steady in an impossible-to-reach place? Locking pliers … with needle nose jaws!

Locking pliers come in all shapes and sizes to suit just about any task you can think of, from huge industrial monsters to miniature precision versions. A cheap set can be had at your local hobby or hardware store for only a few bucks, but I’d recommend coughing up a bit more cash for a high quality set. Remember, all locking pliers are guaranteed to reduce workbench profanities by 37%.*

* Quoted percentages have no factual basis other than observation by the author.

 

 

 

Featured News, Tom Ross

About the author

I got my first RC car way back in 1985 - a Tamiya Wild One - and have been involved in the hobby ever since. I've made every mistake in the book and loved every minute of it... Well, except for that one nitro engine I could never get to run properly. I've bought and sold more vehicles than I care to count, from cars and trucks to planes, helicopters, boats, and more. I'm a dedicated basher, certified bench racer, and collector of random tools. My very favorite part of the hobby is fixing things I've broken.

5 Responses to “Workbench Essentials: Locking Pliers”

  1. Ashley Cobb says:

    sorry but it gets a bit annoying when R/C people say cough up a bit more cash for high quality.

    Yes this is SOMETIMES the case but when it comes to, for example, locking pliers or a soldering iron sometimes the cheap ones work just as well as the ones 10 times their price.

    My $2 locking pliers I’ve had for a few years now and use religiously, have never failed me. Same goes for my $20 soldering iron.

    • Tom Ross says:

      Fair enough! Cheap tools do often work just fine – I have plenty of them myself. Generally, the fewer hinges the better. Screwdrivers good, pliers less so. :)

  2. Justin says:

    Also good for holding small components during soldering, like Deans connectors etc :)

  3. Stephen M Sautter says:

    Use vise grips for holding a work piece, when cutting with a Dremel or other rotary tool.

  4. Ted says:

    They work really well for snapping on and removing ball caps on tie rods etc

Copyright © 2014 Air Age Media. All rights reserved.