Log In

HPI and Hot Bodies releases for September

HPI and Hot Bodies releases for September

New from HPI and Hot Bodies:

Name:  7124_003p.jpg
Views: 0
Size:  207.2 KB

Name:  7124_004p.jpg
Views: 0
Size:  216.1 KB

Name:  7124_005p.jpg
Views: 0
Size:  170.4 KB

Name:  7124_006p.jpg
Views: 0
Size:  171.5 KB

Name:  7124_007p.jpg
Views: 0
Size:  169.1 KB

GT Gigante Truck Body

Pimp out your Savage XL with a clear polycarbonate bodyshell! This is a factory body designed to fit the Savage XL truck perfectly, with provisions for the shock towers, engine and exhaust. Add your own paint job and you’re ready to conquer the track! The GT GIgante bodyshell is designed to fit the XL, and features a longer main section and even wider fenders. It will fit any standard Savage or Maxx-size truck, but will require alternate body post hole positions.

Molded from thick 0.040″ clear polycarbonate. The convenient pre-cut vinyl decal sheet includes: photorealistic headlights, grille, tail lights, official logos, window frames, door handles and more… all die-cut to make applying the decals quick and easy. Overspray film and pre-cut vinyl window masks are included with each body. A decal instruction sheet is included for decal placement, and the body has dimple marks for body post drill locations.

  • Photorealistic die-cut premium vinyl decals include window frames, headlight, grille, tail lights and more, plus official logos!
  • Overspray film and pre-cut vinyl window masks make painting fast and simple
  • A decal instruction sheet is included for decal placement
  • The body has dimple marks for Savage XL body post drill locations
  • Molded from 0.040″ clear polycarbonate plastic for durability and long life

#7124 GT GIGANTE TRUCK BODY $38.00 Name:  7215_002p.jpg
Views: 0
Size:  56.5 KB

Name:  7215_003p.jpg
Views: 0
Size:  55.4 KB

Name:  7215_004p.jpg
Views: 0
Size:  54.9 KB

Name:  7215_005p.jpg
Views: 0
Size:  42.2 KB

Name:  7215_006p.jpg
Views: 0
Size:  41.7 KB

BMW 2002 Turbo Body

The 1973 BMW 2002 Turbo was BMW’s first production turbocharged car, with forced induction giving it remarkable performance for its era. Born in a turbulent time of gas shortages and new safety regulations, the 2002 Turbo boldly wore its performance image in the form of brightly colored reverse-facing “turbo” graphics on the front spoiler. Produced for a short run of fewer than 1,700 cars, surviving 2002 Turbos are now prized by BMW collectors around the world.

HPI replicates the iconic BMW 2002 Turbo shape in R/C form with scale realism and incredible detail. From the widened wheel arches to the deep front spoiler, it’s all there. The body comes in clear polycarbonate so you can paint it with your own favorite color scheme. It’s a perfect fit on Cup Racer and Switch cars as well as many other “Mini” size cars with 225mm wheelbases.

We’ve included front & rear light buckets for the ultimate in realism. The huge vinyl pre-cut decal sheet comes all of the good stuff: turbo stripes, window lines, official BMW logos and HPI logos, and all of the details to make an authentic replica.

Like all HPI bodies, the BMW 2002 Turbo comes with a clear protective overspray film, window masks and a large pre-cut decal sheet. The body also has drill locations marked for HPI Cup Racer cars, making it easy to line up the body mount and antenna holes.

  • Premium vinyl decals include window frames, headlights, grill, tail lights, official logos and more – For a perfect finish with a lot of details
  • Front and rear light buckets – allows you to add real lights for the ultimate realism
  • High quality polycarbonate with excellent dimensional stability and impact resistance – For extra strength and longer life
  • Molded from clear polycarbonate plastic for durability and long life
  • This is an officially licensed replica.
  • Clear body (finished example shown)
  • Pre-marked body post holes – For easy mounting on HPI cars
  • Fits the HPI Cup Racer, HPI Switch and other “Mini” size cars

#7215 BMW 2002 TURBO BODY (WB225mm.F0/R0mm) $30.00 Name:  17540_002p.jpg
Views: 0
Size:  55.4 KB

Name:  17540_003p.jpg
Views: 0
Size:  66.7 KB

Name:  17540_004p.jpg
Views: 0
Size:  47.9 KB

Name:  17540_005p.jpg
Views: 0
Size:  58.6 KB

Name:  17540_006p.jpg
Views: 0
Size:  100.7 KB

BMW M3 E30 body

The BMW M3 E30 is one of the most famous Touring Cars from the 1980’s, having dominated races in the famous DTM and BTCC racing series, as well as wins at grueling endurance ra
ces like the 24 Hours of Nürburgring. The street-going BMW M3 included aggressive modifications designed for racetrack performance like box-flared fenders, wider wheels and tires, an aerodynamic package for downforce at high speeds, and an engine tuned for more horsepower. The result was a street car proclaimed as one of the Top 10 Sports Cars of the 80’s and recently voted as one of the “5 greatest drivers cars of all time” by Automobile Magazine.

HPI faithfully recreates the BMW M3 E30 for R/C cars with this 200mm body that fits wide 1/10 scale sedans and features the usual HPI attention to detail. Included with the body is a pre-cut decal sheet that include window lines, headlights, grills, tail lights, official logos and much more, providing your touring car with a realistically finished product.

This body is clear so you can paint it in your favorite colors. It fits 200mm touring cars and can also be used on 190mm touring cars with the use of wide offset wheels. Overspray film is included, as well as vinyl window masks to make painting quick and simple. An instruction sheet is included for the decals, and the body has dimple marks for body post drill locations.

  • Photorealistic die-cut premium vinyl decals include window frames, headlights, tail lights and more, plus official logos!
  • Front and rear light buckets
  • Molded polycarbonate rear wing
  • Overspray film and pre-cut vinyl window masks make painting fast and simple
  • A decal instruction sheet is included for decal placement
  • The body has dimple marks for body post drill locations
  • Molded from clear polycarbonate plastic for durability and long life
  • This is an officially licensed replica.
  • Clear body (finished example shown)

#17540 BMW M3 E30 BODY (200mm) $35.00 Name:  103255_002p.jpg
Views: 0
Size:  46.5 KB

Name:  103255_003p.jpg
Views: 0
Size:  54.4 KB

Name:  103255_004p.jpg
Views: 0
Size:  33.8 KB

Formula Ten Front Wing Set

This molded nylon Formula Ten Front Wing Set is the Type B configuration with unique aerodynamic shapes to help tune the handling of the car to track conditions. It’s designed for a perfect fit on HPI Formula Ten cars and molded from black nylon. It comes packaged with all of the necessary mounting hardware for a quick and easy installation.

#103255 FORMULA TEN FRONT WING SET (TYPE B) $16.00

Name:  104842_002p.jpg
Views: 0
Size:  24.6 KB

Aluminum Front Suspension Arm Brace

This Aluminum Front Suspension Arm Brace replaces the stock plastic/pressed aluminum front arm brace assembly on HPI BLITZ and Firestorm trucks. It’s a heavy-duty part that is machined from billet aluminum to exact HPI factory dimensions for a perfect fit, and anodized to match other BLITZ option parts.

#104842 ALUMINUM FRONT ARM BRACE (7075) $20.00

Name:  104923_002p.jpg
Views: 0
Size:  27.9 KB

Name:  104923_004p.jpg
Views: 0
Size:  47.6 KB

Flux Alphastar 2350Kv Brushless Motor

The Flux Alphastar 2350Kv Brushless Motor is one-half of the Flux Brushless system that is fitted as standard equipment in the Savage Flux 2350, forming an unstoppable power force for amazing off-road power! The Flux 2350 motor is optimized for 4S LiPo power, making it one of the biggest and most powerful brushless motors available, and was selected specifically for its massive power delivery and voltage handling.

The Flux Alphastar 2350 features a 5mm motor shaft to allow optional pinion gears so you can gear it up for high speed runs, or gear it down for increased acceleration on the track. Giant silicone power wires come with convenient 4mm connectors pre-installed for high power and high efficiency.

2350 rpm/volt / Use with FLUX Q-BASE ESC

#104923 FLUX ALPHASTAR 2350Kv BRUSHLESS MOTOR
#104924 FLUX Q-BASE BRUSHLESS ESC

#104923 FLUX ALPHASTAR 2350Kv BRUSHLESS MOTOR $169.00 Name:  104924_002p.jpg
Views: 0
Size:  44.6 KB

Flux Q-Base Brushless ESC

The Flux Q-Base Brushless ESC is one-half of the Flux Brushless system that is fitted as standard equipment in the Savage Flux 2350 truck, forming an unstoppable power force for amazing off-road power!

With the ability to handle twin 2S LiPo batteries (that’s 14.8 volts of LiPo power!) it can deal with anything the Alphastar 2350 motor can dish out! 4mm bullet connectors secure the motor wires for loss-free connection to the 13-gauge wires, and to connect to each battery pack we’ve attached real Deans® connectors for zero power loss and total efficiency. We figured why re-invent the wheel and release our own connector when the best is already available?

Topping off the versatility of the Flux Q-base is an integrated cooling fan, which allows the electronic speed control to operate at its ideal temperature.

You also have the ability to easily connect it to your computer for total programming control! With our #100573 USB Programming Kit you can connect the Q-base to any Windows-based PC to control all the various facets of its power delivery, braking, throttle curves, battery cut-off and much more. You can also save various profiles to have profiles for racing, insane speed runs, stunts, fun running and more.

With the Flux Alphastar 2350 and Q-base combo, you get power optimized for 4S LiPo batteries, with custom tuning thrown in for fun! You’ll have to experience it to believe it!

#104923 FLUX ALPHASTAR 2350Kv BRUSHLESS MOTOR
#104924 FLUX Q-BASE BRUSHLESS ESC

#104924 FLUX Q-BASE BRUSHLESS ESC $179.00

Name:  105044_002p.jpg
Views: 0
Size:  32.5 KB

Mini-Trophy truck Universal Joint Set

This Universal Joint Set allows HPI Mini-Trophy truck owners to use the #86336 Heavy Duty Final Gear Set. These universals match the output shaft diameter of the HD gears for an easy bolt-on installation. This universal joint set is factory designed, factory manufactured and team tested for the correct fit.

Each package contains two universal joints. These can only be used with the #86336 Heavy Duty Final Gear Set.

#105044 UNIVERSAL JOINT SET (FOR #86336/2pcs) $15.00

Name:  67603_001p.jpg
Views: 0
Size:  53.2 KB

Name:  67607_000p.jpg
Views: 0
Size:  59.9 KB

Khaos Mounted Tires

The HB Block tires have been specially designed to work at their best in a variety of off-road racing conditions, including blue-groove dirt, dusty clay, grass and even Astroturf. From dry to damp or even wet conditions, you’ll find that these tires will be able to get you to the finish line ahead of the rest! These are amazingly versatile racing tires that simply work fantastic!

The carcass of the tire features hundreds of medium-length square pins that allow a large number of tread blocks to touch the ground at any time. The square shape of the blocks give tremendous forward traction and exceptional stopping power while providing a confidence-inspiring amount of side traction – this translates to fantastic acceleration, braking and cornering ability out on the track.

Use HB Block tires to put the hurt on the opposition!

Pink compound is our softest compound and work great for low-traction and bumpy conditions.
Red compound is soft for racing or low-traction surfaces.
White compound is medium, great for practice and all-around use.
Blue compound is firm for high-bite tracks.

HB Block tires work great on a variety of surfaces, from hard-pack dirt to grass and Astroturf.

67603 – HB KHAOS Mounted Tire (Pink/White Wheel/ 1/8 Buggy/2pcs) $40.00
67607 – HB KHAOS Mounted Tire (Pink/Yellow Wheel/ 1/8 Buggy/2pcs) $40.00
67611 – HB BLOCK Mounted Tire (Pink/White Wheel/1/8 Buggy/2pcs) $40.00
67615 – HB BLOCK Mounted Tire (Pink/Yellow Wheel/1/8 Buggy/2pcs) $40.00

Name:  67864_000p.jpg
Views: 0
Size:  60.6 KB

Baja 5T Rodeoo Front Tires

Scaled up from our proven 1/10 scale short course tread, the HB Rodeoo is ready to bring your Baja 5T to a new level in performance. Racers know tires are the single best upgrade you can buy for your truck and these are the best tires available. Good for use on a wide variety of surfaces but best suited for track performance. Pick up some HB Rodeoo tires for your 5T today!

67864 – HB RODEOO TIRE (White/Baja 5T/Front/2pcs) $45.00
67865 – HB RODEOO TIRE (Blue/Baja 5T/Front/2pcs) $45.00
67867 – HB RODEOO TIRE (White/Baja 5T/Rear/2pcs) $48.00
67868 – HB RODEOO TIRE (Blue/Baja 5T/Rear/2pcs) $48.00

Name:  67970_001p.jpg
Views: 0
Size:  55.1 KB

Name:  67970_000p.jpg
Views: 0
Size:  85.9 KB

Baja 5B Proto Rear Tires

With large tread lugs these tires are durable and still provide excellent grip making them good all around tires that are best suited for soft terrain and long mains. Red is soft compound, White is medium compound and Blue is Firm compound.

#67970 HB PROTO TIRE (Blue/Baja 5B/Rear/2pcs) $42.00

Name:  67973_001p.jpg
Views: 0
Size:  55.1 KB

Name:  67973_000p.jpg
Views: 0
Size:  135.7 KB

Baja 5B Khaos Rear Tires

HB Khaos tires have been designed specifically to suit a range of off-road racing conditions, and are perfect for loose dirt, clay, blue groove and damp tracks. They also work great on hard surfaces with a scattering of dust on top.

The tire body has hundreds of wide rectangular lugs spaced around the carcass, providing excellent forward traction and mud-slinging ability to keep the treads clear and the tire free from dirt build-up. The square sides of the treads give supreme cornering grip for extra confidence in technical track sections. Running down the center of the tire is a double row of tread blocks spaced even farther apart for excellent straight-line stability at high speeds. The carcass shape makes it perfect for rutted and bumpy terrain, because the curved sidewall doesn’t dig in and cause grip-rolling through too much traction.

Pick up a set of HB Khaos tires and you’ll be running and gunning in no time!

White compound is medium, great for practice and all-around use. Blue compound is firm for high-bite tracks.

HB Khaos tires are ideal on nearly all dirt surfaces in a variety of conditions.

#67973 HB KHAOS TIRE (Blue/Baja 5B/Rear/2pcs) $42.00

Name:  68182_000p.jpg
Views: 0
Size:  70.9 KB

7mm Engine Mount Set

Ensure the proper engine height with your 3mm chassis. This 7mm engine mount coupled with the 3mm chassis brings the engine back to stock height. Stock chassis is 4mm and stock engine mount is 6mm.

#68182 Engine Mount Set (7mm/2pcs) $24.00

__________________
Trevor “Chilly” Duncan
Online News Editor
Radio Control Car Action
rccanews@airage.com
http://www.rccaraction.com

Updated: December 21, 2010 — 10:50 AM

Leave a Reply

Your email address will not be published. Required fields are marked *

RC Car Action © 2016
WordPress Video Lightbox