Losi 1/10 Bind N Drive Night Crawler

Apr 29, 2010 No Comments by

New from Losi:

Crawling fun doesn’t have to end when the sun goes down. With Losi’s 1/10-scale Night Crawler BND, you can hit the rocks any time, day or night. This Bind-N-Drive crawler is outfitted with bright LED lights specifically designed for navigating rocky terrain after hours. Whether you’re new to the crawling world or an experienced driver, you’ll have a blast attacking the rocks all night long.

While other crawlers require some modifications before they’re ready for the rocks, the 1/10-scale Night Crawler BND is good to go right out of the box, just bind it to your DSM-equipped transmitter. Included is an electronics package with a LiPo compatible, crawler programmed ESC that features voltage cutoff, so both your vehicle and battery will be protected.

Powering this crawler is easier than ever, a 540-sized crawler-specific 55T motor and high-torque metal gear steering servo will get you up and over obstacles in no time. Plus, a worm-gear drive with a smaller differential case gives you increased ground clearance.

The fun with the 1/10-scale Night Crawler BND lasts all day, and all night.

Features:

  • The front and rear solid axle features a worm gear drive that acts as a brake when no power is supplied
  • The included ESC, with crawler-specific programming, accepts NiMH and LiPo batteries
  • All-metal CV front axle and center driveshafts provide superior durability to the driveline to handle the stresses of rock crawling
  • The included Losi receiver with Spektrum 2.4GHz DSM technology means you’ll never have to worry about radio interference
  • The included front and rear LED light set comes pre-wired and mounted to the chassis
  • 4″ adjustable aluminum shocks provide durable, smooth operation and maximum suspension articulation without binding
  • The crawler features a low-center-of-gravity battery tray design that allows for multiple battery types—from NiMH and LiPo “stick” packs to any of the 2.2-inch Losi LiPo crawler battery packs
  • The molded 4-link suspension setup minimizes rear axle swing and provides more precise handling
  • True 3-piece 2.2 beadlock chrome wheels, with 12mm hexes, hold the tire bead in place and let you change tires if needed—all without glue
  • National Champion 2.2 Losi Rock Claw tires with foam inserts are constructed with Losi’s blue compound and have the characteristics, grip and traction to scale even the toughest courses
  • The direct-drive transmission provides an ultra-low gear ratio for rock crawling and metal outputs for durability
  • The twin vertical plate chassis is anodized red for a custom look
  • Zero Ackerman steering provides class leading performance with 45 degrees of steering throw
  • The competition-legal Grappler Pro body features realistic looks and added functionality

Product Specifications

Type: Rock Crawler
Scale: 1/10 (2.2)
Length: 17.5 in (444.5mm)
Width: 9.875 in (250.8mm)
Wheelbase: 12.3 in (312.4mm)
Weight: 4.18 lb (1.9kg)
Chassis: Aluminum twin verticle plate
Suspension: 4-link
Tire Type: 2.2 Losi Rock Claw tires
Motor or Engine: 55T/540-sized motor
Speed Control: Losi MSC12L Fwd/Rev LiPo-compatible with crawler programming
Radio: Included Losi receiver with Spektrum 2.4GHz DSM technology
Wheel Size: 2.2-inch beadlock
Kit/RTR: BND
Shock Type: Adjustable 4-inch aluminum, coil-over, oil-filled
Body: Pre-decorated Grappler Pro

Needed to Complete

  • Surface transmitter with Spektrum 2.4GHz DSM Technology
  • 7.2V NiMH or 7.4V LiPo Battery Pack
  • Compatible Battery Charger
  • EC3 Adapters (If needed, LOSB9610/ LOSB9623)

LOSB0104BD – $299.99

Name:  LOSB0104BD-GAL3.jpg
Views: 0
Size:  20.9 KB

Name:  LOSB0104BD-GAL5.jpg
Views: 0
Size:  26.3 KB

Name:  LOSB0104BD-GAL9.jpg
Views: 0
Size:  28.0 KB

Name:  LOSB0104BD-GAL8.jpg
Views: 0
Size:  22.8 KB

Name:  LOSB0104BD-ACT8.jpg
Views: 0
Size:  48.7 KB Name:  LOSB0104BD-GAL6.jpg
Views: 0
Size:  27.4 KB

Name:  LOSB0104BD-GAL7.jpg
Views: 0
Size:  36.7 KB

Name:  LOSB0104BD-GAL17.jpg
Views: 0
Size:  43.0 KB

Name:  LOSB0104BD-GAL15.jpg
Views: 0
Size:  39.7 KB

Name:  LOSB0104BD-GAL16.jpg
Views: 0
Size:  49.6 KB

Name:  LOSB0104BD-GAL19.jpg
Views: 0
Size:  41.6 KB Name:  LOSB0104BD-GAL10.jpg
Views: 0
Size:  52.5 KB

Name:  LOSB0104BD-GAL11.jpg
Views: 0
Size:  44.8 KB

Name:  LOSB0104BD-GAL12.jpg
Views: 0
Size:  30.9 KB

Name:  LOSB0104BD-GAL13.jpg
Views: 0
Size:  39.4<br /> KB

Name:  LOSB0104BD-GAL14.jpg
Views: 0
Size:  41.9 KB

Name:  LOSB0104BD-ACT7.jpg
Views: 0
Size:  42.4 KB  

__________________
Trevor “Chilly” Duncan
Online News Editor
Radio Control Car Action
rccanews@airage.com
http://www.rccaraction.com

Featured News, Rock Crawling

About the author

Bringing you RC product news you can use on a daily basis as Car Action's Online News Editor. I have over 15 years of RC experience, plus a background in print and broadcast journalism, engineering, information technology, direct marketing, and even banking. Currently I enjoy racing 1/10 electric off-road, and have been bitten by the short course bug.
No Responses to “Losi 1/10 Bind N Drive Night Crawler”
Copyright © 2014 Air Age Media. All rights reserved.