Vanquish S8E 80mm & 90mm Scale Shock Sets

Vanquish S8E 80mm & 90mm Scale Shock Sets

From Vanquish:
The New Incision S8E 80mm & 90mm Scale Shocks feature a larger 8mm bore for increased damping, control, and tuning. Dual molded X-Ring lower shock cartridge provides more sealing surfaces than standard o-rings. Threaded shock bodies allow for a wide spring preload range. The shock caps incorporate a bleeder screw for easy initial oil level setup and utilize an upper stainless steel pivot ball for precise tolerances and bind free movement.

Vanquish S8E 80mm & 90mm Scale Shock Sets Vanquish S8E 80mm & 90mm Scale Shock Sets

S8E 80mm Scale Shock Set

The Incision S8E 80mm Scale Shocks feature a larger 8mm bore for increased damping. The increased volume reduces internal shock pressures for longer seal life. Dual molded X-Ring lower shock cartridge provides more sealing surfaces than standard o-rings. Threaded shock bodies allow for a wide spring preload range. Offset lower shock pivot balls allow for greater flexibility for tuning shock angles.

Features:

  • 8mm Bore Scale Shocks
  • Machined Aluminum Threaded shock bodies
  • Scale shock cap with steel pivot ball and bleeder screw
  • Polished Shock shafts
  • Dual X-Rings
  • Optional spring rates available IRC00512

Notes:

  • Offset lower pivot ball included for Vanquish Products F10 axles. Standard width pivot ball required for other applications.
  • Shock oil is not included
  • Lower cartridge comes pre-assembled with internal snap rings.
  • Recommended pliers for the lower cartridge snap ring are KNIPEX – 48 11 J0 Tools

#IRC00500 – $39.99

Vanquish S8E 80mm & 90mm Scale Shock Sets Vanquish S8E 80mm & 90mm Scale Shock Sets

S8E 90mm Scale Shock Set

The Incision S8E 90mm Scale Shocks feature a larger 8mm bore for increased damping. The increased volume reduces internal shock pressures for longer seal life. Dual molded X-Ring lower shock cartridge provides more sealing surfaces than standard o-rings. Threaded shock bodies allow for a wide spring preload range. Offset lower shock pivot balls allow for greater flexibility for tuning shock angles.

Features:

  • 8mm Bore Scale Shocks
  • Machined Aluminum Threaded shock bodies
  • Scale shock cap with steel pivot ball and bleeder screw
  • Polished Shock shafts
  • Dual X-Rings
  • Optional spring rates available IRC00513

Notes:

  • Offset lower pivot ball included for Vanquish Products F10 axles. Standard width pivot ball required for other applications.
  • Shock oil is not included
  • Lower cartridge comes pre-assembled with internal snap rings.
  • Recommended pliers for the lower cartridge snap ring are KNIPEX – 48 11 J0 Tools

#IRC00501 – $39.99
Visit VanquishProducts.com
See more posts about Vanquish

Never miss an issue of RC Car Action!

Subscribe today with a Digital Edition subscription or Print + Digital combo!

Updated: March 18, 2022 — 9:12 AM
Air Age Media © 2022