From Traxxas:
The BL-2s™ brushless power system delivers more speed, faster acceleration, and virtually maintenance-free operation at an affordable price. Drivers experience smooth, effortless power with added punch for tire-shredding burnouts and blazing fast speed. Optimized for 7-cell NiMH and 2s LiPo batteries, the BL-2s delivers all-day fun, battery after battery.
BL-2s Brushless Electronic Speed Control
The waterproof BL-2s speed control delivers all the benefits of brushless technology with the safety and convenience features you expect from Traxxas. Built-in low-voltage detection, thermal shutdown protection, and EZ-Set® one button programming make BL-2s reliable and easy to operate.
BL-2s ESC Features:
- Fully waterproof
- Built-in two-stage low voltage detection for lithium polymer (LiPo) batteries
- NiMH battery packs 6-7 cells (7.2 – 8.4 V) or 2-cell LiPo battery packs (7.4 V)
- Patented Training Mode™ reduces the power output by 50% for new or younger drivers. When they’re ready, simply change profiles to unleash full-throttle action.
- EZ-Set® one-button setup operates and programs just like other Traxxas speed controls
- Three programmable drive profiles:
- Sport Mode – Fwd / Brake / Rev
- Race Mode – Fwd / Brake
- Training Mode™– 50% Fwd / Brake / 50% Rev
- Multi-color status LED
- Two-stage thermal shutdown protection protects the BL-2s from overheating
- Large aluminum heatsink dissipates heat
- Built-in auxiliary fan output
- Keyed motor connector
BL-2s Brushless Motor
The sensorless BL-2s 3300 kV motor delivers the all-day speed and torque you expect from brushless technology, without the high price tag. With no brushes to wear out, the BL-2s is long-lasting and virtually maintenance free. Low-friction ball bearings and an integrated cooling fan open the door to all-day fun.
BL-2s Brushless Motor Features:
- Integrated cooling fan
- Low-maintenance design
- High-speed ball bearings
- 3300 kV
Integrated Cooling Fan
With no brushes to wear out, the BL-2s brushless motor delivers long-term fun with very low maintenance. An integrated fan pulls cooling air through the motor for all-day running without slowing down.
Quick Connect Motor Plug
The Traxxas Quick Connect Motor Plug delivers free-flowing power from the ESC to the motor. The specially-keyed design aligns the plug in the correct orientation every time.
BL-2s WATERPROOF ESC SPECIFICATIONS:
Input Voltage: NiMH 6-7 cells (7.2 to 8.4 volts);
LiPo 2 cell (7.4 volts)
Case Size: 39 mm W x 59 mm D x 31 mm H
Weight: 87 grams
Reverse Delay: Yes, with lockout
BEC Voltage: 6.0 volts
BEC Current: 3 amps
Input Wire: 14 gauge
Motor Connectors: Quick Connect Motor Plug
Input Harness Wire: 26 gauge
Low Voltage Detection: 2-stage indicators, switchable (on or off)
Thermal Protection: 2-Stage thermal shutdown
Profile selection: Sport Mode: 100% Fwd, 100% Brake, 100% Rev | Race Mode: 100% Fwd, 100% Brake, No Rev : Training Mode:* 50% Fwd, 100% Brake, 50% Rev
Single-Button Setup: Traxxas EZ-Set®
Battery Input Connector : Traxxas High-Current Connector
Motor Types: Brushless
Accessory Port: Auxiliary fan
*Patented
BL-2s BRUSHLESS MOTOR SPECIFICATIONS:
Type: Sensorless brushless
kV: 3300 kV
Wire Size: 16 gauge
Cooling: Integrated cooling fan
Motor Length: 57 mm
Can Diameter: 37 mm
Weight: 201 grams
Accessory Cooling fan (3340)
The 3340 accessory cooling fan (sold separately) reduces ESC temperatures during extended operation for maximum power flow. It securely clips onto the BL-2s heatsink for easy installation. Wires are neatly routed through the integrated connector clip. Simply plug the accessory cooling fan into the BL-2s accessory power connector and clip the fan onto the heatsink for increased cooling.
Available Now In These Models
#68154-4 – Slash 4X4 Brushless – $329.95
#67164-4 – Rustler 4X4 Brushless – $329.95
#67154-4 – Stampede 4X4 Brushless – $329.95
#3382 – BL-2s Brushless Power System – $99.95
Visit Traxxas.com
See more posts about Traxxas