Tekno EB410 Option Pistons & 70T Spur Gear

Tekno EB410 Option Pistons & 70T Spur Gear

From Tekno RC:

Tekno EB410 Option Pistons & 70T Spur Gear Tekno EB410 Option Pistons & 70T Spur Gear
With these optional pistons, it is now easier than ever to fine-tune suspension characteristics based on your needs. Made from precision machined self-lubricating delrin, these CNC pistons have two large 1.8 or 17.7mm holes and four small relief holes.

#TKR6731 – Shock Pistons (CNC, 2×1.7, flat/flat, 13mm, 2pcs) – $9.99
#TKR6732 – Shock Pistons (CNC, 2×1.8, flat/flat, 13mm, 2pcs) – $9.99

Tekno EB410 Option Pistons & 70T Spur Gear Tekno EB410 Option Pistons & 70T Spur Gear

The TKR6670 70 tooth black composite spur gear is intended to be used on the EB410 buggy when running a 13.5 (or more) turn motor. If you were running a 25 tooth or larger pinion with the stock spur, this optional spur allows you to run a smaller pinion.

Pair this spur with a smaller pinion and the motor will be more centrally located, providing better balance. This spur is especially helpful in stock motor racing as it allows for additional gearing options while reducing the driveline’s rotating mass.

Pinion To Use:

Use the chart below when choosing a pinion to run with this spur.

Tekno EB410 Option Pistons & 70T Spur Gear

#TKR6670 – Spur Gear (70t, 48pitch, composite, black, EB410) – $7.99
Visit TeknoRC.com
See more posts about Tekno RC

Subscribe today with a Digital Edition subscription or Print + Digital combo!

Never miss an issue of RC Car Action!

Subscribe today with a Digital Edition subscription or Print + Digital combo!

 

Updated: December 1, 2017 — 3:57 PM
Air Age Media ©