HRP Savox Website 900x250
Log In

Tekno EB410 13.5 Gear Diff Bundle From MIP

Tekno EB410 13.5 Gear Diff Bundle From MIP

From MIP:
MIP Pucks™ ‘ARE’ the future for 13.5 racing Tekno EB410 Vehicles! MIP’s all new Pucks™ Performance Bundle Drive system is an aluminum based drivetrain system that every racer needs! This Drive System features an all new redesigned 2-piece Aluminum Bi-Metal Bone and Alloy Steel Yoke, 2 Front 78mm Bones & 2 Rear 69mm Bones and of course comes with MIP’s 1.5 Pucks™.

Our Pucks™ increase the longevity of your Drive System by reducing the wear and tear between the pins of the bone and slots of the cups. So instead of having to replace the whole bone and outdrive, simply replace the Pucks™ that sit on the pins and you are ready to race!

Most importantly, our Drive System decreases the drivetrains overall rotating mass by a whopping 25%! The decrease in weight directly results in quicker acceleration, deceleration, and lower motor temps!

Get the advantage that every stock racer craves! Order yours Today!

Whats New?

The new Bi-Metal Bone and Yoke now use 2 sets crews to attach together with a 2x 4-40 x 3/32” set screws; using a .050” hex wrench (sold separately) to assemble, this means all the hardware uses the same wrench now!

TARGET CUSTOMERS:

  • Tekno EB410 Vehicles
  • COMPETITIVE ADVANTAGES:
  • 25% Less Rotating Mass
  • Quicker Acceleration off Corners
  • Quicker Deceleration
  • Less Overall Wear and Tear on Drive Components

INCLUDES:

1 – MIP Confetti Sticker
1 – MIP Inst. Sheet
1 – MIP Thread Gel Safety Sheet
1 – MIP Lube & Thread Gel Cup
2 – SHSS, M4 x 3mm Cup Set Screw
8 – BHCS, 1-72 x 1/8 Button Head, Alloy
4 – MIP Pucks, Keyed Puck Pin, No 1.5 Pucks, 1/10th
8 – MIP Keyed Drive Puck, Ten SCTE
2 – MIP Pucks, 17.5 Diff Input Drive Cup, Tekno EB410
2 – MIP Pucks, 17.5 Gear Diff Cup, Tekno EB410
1 – MIP Pucks, 17.5 Center Bone, Front 129mm, Tekno EB410
1 – MIP Pucks, 17.5 Center Bone, Rear 48mm, Tekno EB410
8 – SHSS, 4-40 x 3/32″ Cup Point
8 – BHCS, 1-72 x 1/8 Button Head, Alloy
4 – MIP Pucks, Keyed Puck Pin, No 1.5 Pucks, 1/10th
4 – MIP Bi-Metal R-CVD Yoke, Tekno EB410
4 – MIP SW4 Stop Washer, Losi 22
8 – MIP Keyed Drive Puck, Ten SCTE
1 – Support Parts Insert Sheet, Extra Kit Parts
2 – BHCS, 1-72 x 1/8 Button Head, Alloy
2 – SHSS, 4-40 x 3/32″ Cup Point
2 – MIP Pucks, Keyed Puck Pin, No 1.5 Pucks, 1/10th
1 – MIP Pucks, 17.5 Gear Diff Cup, Tekno EB410
16 – MIP Keyed Drive Puck, Ten SCTE
2 – MIP Pucks, 17.5 Bi-Metal Bone, Front 78mm, Tekno EB410
2 – MIP Pucks, 17.5 Bi-Metal Bone, Rear 69mm, Tekno EB410
4 – MIP Pucks, 17.5 Gear Diff Cup, Tekno EB410

REQUIRES:

  • .050 Allen Key – (Suggest – #9000 MIP Hex Driver Wrench .050 inch)

COMPATIBILITY:

  • EB410 (1/10th Scale 4wd Buggy)

#17150 – $154.99
Visit MIPOnline.com
See more posts about MIP

Tekno EB410 13.5 Gear Diff Bundle From MIP

Never miss an issue of RC Car Action!

Subscribe today with a Digital Edition subscription or Print + Digital combo!

Updated: December 6, 2017 — 2:51 PM
Venom proquad charger 600x120
Track Directory 600x120

Leave a Reply

Your email address will not be published. Required fields are marked *

Air Age Media © 2018
WordPress Image Lightbox