TRX-4 Mind and Soul 900x250

Tekin GEN4 Eliminator Drag Racing 1/10 Brushless Motor

Tekin GEN4 Eliminator Drag Racing 1/10 Brushless Motor

From Tekin:
Tekin’s GEN4 Lineup introduces the Eliminator purpose built Drag Racing motor, engineered for award-winning performance. Utilizing Oversized Ultra Torque rotors and the best materials available, we designed the Eliminator to cut weight while reducing resistance, resulting in a purebred Drag Racing machine. From Pro Mod to Street Eliminator classes, the Eliminator motors create huge power across all RPMs whenever you need it. The GEN4 Eliminator is competition performance with the speed and power you need to gap the competition.

The GEN4 motor line is a completely new ground-up design. We put in the design and test time so you can reduce your lap times. The new stator is precision stamped and pressed, increasing efficiency and reducing resistance. Our motors are hand-wound with high purity copper wire and machined from 6061-T6 aluminum. Completely tunable with optional rotors and re-buildable, the new GEN4 Eliminator motor is a premium performance power plant for the serious drag racer.

Specs:

Input Voltage: 1-2S LiPO – 2.5T / 3.5T / 4.0T / 4.5T / 5.0T
Weight: 5.1oz / 145g
Shaft Dimensions: 3.18mm (1/8″) x 15.3mm
Motor Diameter: 35.85mm / 1.40″
Motor Length: 50.25mm / 1.978″
Max Operating Temperature: 180°F / 82°C
Bearing Dimensions: Front: 4x13x5mm | Rear: 1/8×3/8×5/32″
Rotor Size: 13mm TORQUE RED – 3.5T / 4.0T / 4.5T / 5.0T | 13.5mm ULTRA TORQUE YELLOW – 2.5T
Rebuildable: Yes

DRAG RACE

1:10 2WD No Prep
1:10 2WD Street Eliminator
1:10 2WD Street Outlaw
1:10 2WD Pro Stock
1:10 2WD Pro Mod
1:10 2WD Top Fuel

Features:

  • 60 Degrees Adjustable Timing Advance
  • Drag Racing Specific Design
  • CNC Machined 6061-T6 Billet Aluminum Heat Sink Can
  • ULTRA TORQUE Neodymium Sintered Magnet
  • Precision Engineered for Maximum Energy Conversion
  • High Purity Copper Windings Maximize Conductivity
  • Low Resistance, High Power Solder Tabs
  • Sensored System Ready
  • Anodized End-bell Plates Maximize Corrosion and Wear Resistance
  • High RPM Precision Bearings
  • Oversized Front Bearing
  • Rebuild-able Design
  • Solder-less Sensor PCB Replacement
  • Legal in Major Race Governing Bodies
  • No-Prep RC Legal

#TT2758 – 5.0T ELIMINATOR
#TT2771 – 4.5T ELIMINATOR
#TT2759 – 4.0T ELIMINATOR
#TT2772 – 3.5T ELIMINATOR
#TT2773 – 2.5T ELIMINATOR
Visit TeamTekin.com
See more posts about Tekin

Tekin GEN4 Eliminator Drag Racing 1/10 Brushless Motor Tekin GEN4 Eliminator Drag Racing 1/10 Brushless Motor Tekin GEN4 Eliminator Drag Racing 1/10 Brushless Motor Tekin GEN4 Eliminator Drag Racing 1/10 Brushless Motor

Never miss an issue of RC Car Action!

Subscribe today with a Digital Edition subscription or Print + Digital combo!

Updated: June 12, 2020 — 9:59 AM

Leave a Reply

Your email address will not be published. Required fields are marked *

Air Age Media © 2020
WordPress Image Lightbox