Serpent now offers the SRX8 GT also in a Ready To Race, to make this superb car even more attractive to a broader customer base, so also Hobby racers can now join in for the action. Top-quality components packed in a Ready-to-race package, the best start a Hobby-driver can make. High end racing chassis with top quality parts, impressive 2.4 GHz transmitter and the Serpent S21 pull start engine.
Chassis plate in 3mm 6061T6 aluminum. Kick-up angle on front for stable landings. Countersunk holes. Slots to locate the front and rear suspension mounts precisely. Angled sides to increase stiffness.
Large foam bumper, which is kept in place by a upper and lower nylon bumper plate.
Composite stiffener front and rear, to give extra stiffness, but still allow some flex as needed.
This radio box design allowed us to have a lot of new advancements for this car, which included, as seen above a new updated center diff assembly and super easy to adjust braking mechanism. The flush mounted transponder and carbon fiber decals, set this thing apart from anything you
Steering blocks assembly
Composite steering blocks combined with 10 degr C-hubs for precise steering. Spring steel wheel-axles with large size bearings and larger inner with precision threaded aluminum wheel-hubs with offset. Flanged wheel nuts to guarantee that you will not loose a wheel nut in a race.
Durable oversized lower suspension arms in strong composite nylon. On the lower side the special shaped down stops screws are mounted. The lower shock-mounting pins are secured with a small grubscrew from the bottom.
Front anti-roll bar
The front anti-roll bar system, consist of a spring steel bend wire, which is guided through the diff-cases and runs in steel adapters. The wire is linked to the lower suspension arm, with a captured adjustable threaded pivot ball, for very precise and low friction operation and easy tuning.
Shock tower and body mounts front
4.0mm thick aluminum anodized Shock tower with 3 upper positioning holes for the shocks and and 4 holes for roll-center positions. Strong, in height adjustable body mounts with wide top-section to seat the body well.
Rear suspension arms and uprights
Durable longer oversized lower suspension arms in strong composite nylon. On the lower side the special down stops screws are mounted. The lower shock-mounting pins are secured with a small grubscrew from the bottom. Composite uprights with 3 upper roll-center positions. Strong steel track-rods with L/R threading and strong balljoints to pre-set camber. Hard steel wheel-axles with large size bearings and larger inner ones with precision threaded aluminum wheel-hubs with offset. Flanged wheel nuts to guarantee that you will not loose a wheel nut in a race.
Shock tower rear and Body mount
4mm thick aluminum Shock tower, integrated into the rear section for extra stiffness, with 4 upper positioning holes for the shocks and 4 holes for roll-center positions. Polycarbonate rear low aero wing. Central rear Body mount with the rear body post, which are adjustable in height easily .
Captured pivot pins and balls and bolted hinge pins
All spring-steel hinge pins are either captured or bolted in place and made in spring-steel quality. This relieves stress on the hinge pin when adjusting the kick up, or anti squat. Your pin is free to rotate to any angle without binding.
Shock absorbers RCM big-bore 16mm / RCM shock springs
Anodized aluminum shock bodies with durable 4mm shock-rods. Pre-load adjuster clips for ride height setting. Shocks use large diameter membranes and large diameter O-rings and bushings to create a super smooth and leak-proof package. Large diameter pistons are held in place by a nut on the polished shock-rods tops. Open type spring retainer to let dirt out easy. Color-coded progressive race shock springs are supplied for the 1st standard set-up and all springs are grinded flat top and bottom, and checked individually for tension and length and are matched.
Compact gear differentials 2-speed gearbox
Very compact gear differentials with very smooth metal sintered gears, and steel shaft. Perfect sealing case with special gasket and O-rings. Very light and durable outdrive cups in spring-steel. Hardened spring-steel diff-coupler 13T with connector running in 2 oversized bearings.
The automatic 2-speed SL8 XLI gearbox with centrifugal shoes. The gearbox comes straight from the Viper 990 on road 1/8 car. Gearing 58-63T
Front and rear drive
The front has captured driveshafts using a CVD system. The rear has durable black steel driveshafts with hard steel pins.
Serpent super-low SRX8 GT body, fully pre-painted in a very attractive design and pre-cut too. The very low body has excellent handling and downforce
Tires / wheels
The Cobra is fitted with pre-mounted DragonRC GT racing tires. The tires are glued on durable but flexible DragonRC race-wheels with cell-foam inserts. A super-package for excellent grip on the most common surfaces
Transmitter and receiver
The DragonRC DTS-3 2.4GHZ pistol type transmitter. The small and light receiver is fitted inside the radio box of the car.
The Serpent S21 pull start engine for SRX8 GT has a outstanding quality level, high performance, combined with easy starting and long lasting runtime, makes this engine the ideal partner to start racing. The engine is mounted securely on machined aluminum engine mounts.
Oils and grease
Top-quality silicone shock-oil, silicone diff oil and some grease is used to meet the standard set-up.
Manual and set-up
Full color user manual with easy to follow steps, exploded views for easy spares ordering. A separate manual for the transmitter and the speed controller is included.
Black and white promo body-decals ; Serpent generic and SRX8 GT ones.
The RTR kit is packed in a colorful large strong packing box with protection for car and transmitter.
- Race ready high performance 1/8 gas powered GT
- Expert pre-assembled and pre-set
- 4wd with cardan shafts, 2 compact ,durable
- Geardiffs, compact radio box , unique angled steering system, 16mm big bore shocks, ball raced anti-roll bars FR and RR, 6061T6 alu Shock tower FR and RR, durable suspension and transmission parts, captured suspension pins, the works!!
- Serpent S21 pull start engine
- Serpent .21 Pipe set polished Inline
- Dragon-RC pistol type transmitter 2.4 GHz
- Dragon-RC 15kg strong servo with metal gears
- Dragon-RC high grip pre-mounted GT race tires and wheels
- Pre-painted and pre-cut ultra-low GT body shell and large rear aero-wing
- Full color user manual and decal set included
Service and Support
The Serpent distributor, dealer or agent is your source for more info, but also the Serpent website and the member section and the YouTube channel provides lots of information.
Needed to complete the car:
- 4 x AA batteries for the transmitter
- Receiver battery NIMH / LIFE / LIPO
- Fuel with 16 or 25% nitro and fuel bottle
- Glow plug starter