Traxxas Hoss 4X4 VXL

Serpent Natrix 750 EVO 4WD 1/10 GP

Serpent Natrix 750 EVO 4WD 1/10 GP

Serpent Natrix 750 EVO 4WD 1/10 GP Serpent Natrix 750 EVO 4WD 1/10 GP Serpent Natrix 750 EVO 4WD 1/10 GP

From Serpent:
750 Evo features:

The chassis is made from 3mm 7075-T6 aluminium and has been improved regarding the flex characteristics.

It features a new weight bridge, vibration isolated as already used in the big brother, the 989.

For the front we can also use a small adjustable weight, especially useful under high-grip circumstances.

In the rear we now have 2 options for the pivot-width. The default position is the same as in the 750, while the wider option is similar to the 748.

The new rear suspension is completely new. It features the possibility of a toe change during suspension travel.

Due to the unique design, there is zero binding as well under all circumstances.

In the neutral position the toe-change is absolute zero. In this position the rear end acts like the regular 750 rear end.

The higher the link on the upright, the more toe-gain is achieved under compression, resulting in more rear traction under acceleration.

The new front arms are open style for aerodynamic reasons. They feature mounting points for an optional heave damper.

The 2-speed gearbox is completely new. It is based on the 989 gearbox and bullet-proofed.

A much longer ramp for the roller avoiding locking of the second gear even with excessive wear on the shoes.

M4 setscrews for gap adjustment to help keeping the gap constant.

2 bearings in the second gear “bell” for better truth of rotation and balance.

2nd gear adapter is locked in position to avoid binding and deliver constant performance of engine and gearbox.

Newly designed flex cover provides a force free stiffener rod.

New shocks and shock towers. These shocks are taken from the 989 and provide trouble-free, low friction action for increased traction.

The piston is fixed onto the shaft with a nut. No clips or shims.

On top of that we payed a lot of attention to the bottom seal. 2 X-rings and a long bushing provide that extra bit of low-friction sealing that keeps the oil inside and the dirt outside.

Hard anodized bushings provide a 100% secure positioning of the front upper suspension brackets.

As an option the 989 offers a heave-damper setup in the front as well as the rear.

In this way it is possible to change heave adjustments more or less independent of roll adjustments.

As an example it is possible to have a very light roll damping combined with a very high heave damping, something which is not possible with a classic suspension.

The third damper can be used to only alter the damping characteristics without a third spring, but also to add a spring to alter spring rates for heave.

The front and rear heave sets are available as an option.

Another option is a side-guard/stiffener for the body shell.

Designed by World and European Champion Michael Salven.

#804012
Visit Serpent.com
See more posts about Serpent

Serpent Natrix 750 EVO 4WD 1/10 GP Serpent Natrix 750 EVO 4WD 1/10 GP Serpent Natrix 750 EVO 4WD 1/10 GP

Never miss an issue of RC Car Action!

Subscribe today with a Digital Edition subscription or Print + Digital combo!

Updated: September 11, 2020 — 10:27 AM

Leave a Reply

Your email address will not be published. Required fields are marked *

Air Age Media © 2020
WordPress Image Lightbox