RPM Skid Plates & Front Bumper For ARRMA 6S Vehicles

From RPM:

Rear Skid Plate for most ARRMA 6S vehicles

One of the highest dollar replacement items on any vehicle is the chassis, especially when that chassis is a 3 – 4mm thick aluminum plate. On ARRMA 6S vehicles, there’s absolutely no protection for the underside of the chassis. Rocks, roots, asphalt, etc, can all create nasty scabs, scrapes and dents that will eventually lead to the need for a replacement.

Help reduce skid and scrape damage by installing an RPM Rear Skid Plate to your favorite ride. The areas most prone to damage are at the extreme ends of the chassis and the RPM Rear Skid Plate protects the rear end with 4mm of RPM engineering grade nylons that is not only extremely tough and durable, it also slides up and over obstacles much easier than aluminum. The leading edge of our skid plate has been rolled to a thin edge to reduce the likelihood of it catching while the rear is a full 4mm thick for a long-lasting skid plate built to handle some serious punishment!

Tech Notes: The RPM #81332 Skid Plate is compatible with V5 & EXB model 6S ARRMA vehicles and is reverse compatible with older version vehicles (V1 – V4) as well.

#81332 – $8.95

Front Bumper and Skid Plate for the ARRMA Kraton 6S (V5, EXB & older models)

The RPM Front Bumper and Skid Plate for the ARRMA Kraton 6S has been updated to work with all current versions, from the V5 and EXB editions as well as older models. The differential clearance area has been widened for the larger differential hump found on the V5. Additionally, we’re now including a hinge pin retainer plate so no additional parts are necessary to run our front bumper.

Just like our previous version, our Kraton 6S Front Bumper is structurally engineered to add much needed impact-absorption to the front of the Kraton. The RPM front bumper dramatically reduces transferred impact forces to the chassis. Additionally, our two-piece design incorporates a 4mm thick skid plate with 1.5mm skid ribs, extending more than 1-1/2” (38mm) in front of the chassis and protects the front of that expensive aluminum chassis from skid and impact damage. We then bolt a huge, 3/8” x 1/2″ x 6-3/4” (9.5mm x 12.7mm x 171.5mm) curved oval bumper on top to help protect the body as well.

Each RPM Front Bumper and skid plate is molded in black from our exclusive blend of engineering grade nylons for unmatched strength and durability. All RPM molded products are 100% made in the USA and backed by our limited lifetime warranty against breakage.

Tech Notes: The RPM Front Bumper and Skid Plate is designed specifically for the ARRMA Kraton V5 & EXB, yet will fit most ARRMA vehicles (V5 and older) running stock gearbox case set #AR310854 or #AR310427 and any Durango vehicle running stock gearbox case set #TD210046. Unfortunately, RPM cannot guarantee proper body clearance with any ARRMA / Durango vehicle not listed here (some body trimming may be necessary to clear the bumper on those vehicles).

#81812 – $20.95
Visit RPMRCProducts.com
See more posts about RPM

Subscribe today with a Digital Edition subscription or Print + Digital combo!