Absolute Hobbyz 900x250
Log In

RPM Rear A-Arms & Mud Guards For ARRMA Vehicles

RPM Rear A-Arms & Mud Guards For ARRMA Vehicles

From RPM:

RPM Rear A-Arms & Mud Guards For ARRMA Vehicles (4)

RPM Rear A-arms for the ARRMA Kraton, Talion & Outcast as well as the Durango DEX8T are designed for the ultimate in strength and durability while adding in some much-needed features. First is slop elimination. Our A-arms reduce the amount of movement of the A-arm at the hinge pins, providing for better suspension response and more consistent suspension settings.

Our next improvement is the addition of a second shock mount hole further out on the arm, providing for a lower profile suspension set-up. This second shock mount allows the shocks to lay down further and lowers the ride height for a lower center of gravity. This second shock mount matches the additional shock mount hole on our front A-arms (RPM #81482 – sold separately).

Another beneficial improvement comes from reduced weight. RPM Kraton, Talion & Outcast Rear A-arms are roughly 10% lighter than stock AARMA A-arms (48g each versus 53g for stock)!

RPM rear A-arms have molded in mounting points for our optional mudguards – RPM #81412 (sold separately). If you plan on running through wet or muddy conditions, these guards are a must-have addition to help protect your driveline from debris kicked up from your front tires.

Our A-arms are designed with leading and trailing 30° chamfered edges for smoother transitions over obstacles too tall for the suspension to clear. As an added benefit, these chamfered edges are more aerodynamic than stock as well. All RPM A-arms are molded from our nearly indestructible blend of engineering grade nylons for performance you can rely on when conditions are at their worst!

Tech Notes: RPM ARRMA Kraton, Talion, Outcast & Durango DEX8T A-arms are sold in pairs. Our A-arms replace stock ARRMA #AR330249 and stock Durango #TD330707. Stock Durango dirt guards (#TD330764) are not compatible with these A-arms (must use RPM #81412).

#81402 – Rear A-arms for the ARRMA Kraton, Talion & Outcast (also fits the Durango DEX8T) – $13.95

RPM Rear A-Arms & Mud Guards For ARRMA Vehicles (3) RPM Rear A-Arms & Mud Guards For ARRMA Vehicles (2) RPM Rear A-Arms & Mud Guards For ARRMA Vehicles (1) RPM Rear A-Arms & Mud Guards For ARRMA Vehicles (5)
RPM Mud Guards work with RPM #81402 A-arms exclusively (for the ARRMA Kraton, Talion & Outcast as well as the Durango DEX8T) and help prevent dirt and mud build-up in your rear suspension and driveline components. By keeping the debris kicked up by your front wheels off of the rear shocks, turnbuckles and driveshafts, your suspension and driveline components will last longer and run much smoother between cleanings.

RPM Mud Guards are extremely light (weighing in at only 8.5g. each) sold in pairs and molded in our engineering blend of incredibly strong nylons for a lifetime of protection you can trust.

Tech Notes: RPM Mud Guards work exclusively with RPM A-arms (RPM #81402). They are not designed to work with stock or any other aftermarket A-arms.

#81412 Mud Guards for RPM Kraton, Talion & Outcast Rear A-arms (RPM #81402) – $6.95

Visit RPMRCProducts.com
See more posts about RPM

Never miss an issue of RC Car Action!

Subscribe today with a Digital Edition subscription or Print + Digital combo!

Updated: May 9, 2017 — 9:55 AM
Traxxas Mustang  600x120
Hobbico 7PX 600 x 120

Leave a Reply

Your email address will not be published. Required fields are marked *

Airage Media © 2017
WordPress Video Lightbox Plugin