E-Revo Colors 900x250
Boost Login

RPM Now Offering Blue A-Arms For ARRMA 1/8 Vehicles

RPM Now Offering Blue A-Arms For ARRMA 1/8 Vehicles

From RPM:

RPM Now Offering Blue A-Arms For ARRMA 1/8 Vehicles
RPM Rear A-arms for the ARRMA Kraton, Talion & Outcast as well as the Durango DEX8T are designed for the ultimate in strength and durability while adding in some much-needed features. First is slop elimination. Our A-arms reduce the amount of movement of the A-arm at the hinge pins, providing for better suspension response and more consistent suspension settings.

Our next improvement is the addition of a second shock mount hole further out on the arm, providing for a lower profile suspension set-up. This second shock mount allows the shocks to lay down further and lowers the ride height for a lower center of gravity. This second shock mount matches the additional shock mount hole on our front A-arms (RPM #81482 – sold separately).

Another beneficial improvement comes from reduced weight. RPM Kraton, Talion & Outcast Rear A-arms are roughly 10% lighter than stock AARMA A-arms (48g each versus 53g for stock)!

RPM rear A-arms have molded in mounting points for our optional mudguards – RPM #81412 (sold separately). If you plan on running through wet or muddy conditions, these guards are a must-have addition to help protect your driveline from debris kicked up from your front tires.

Our A-arms are designed with leading and trailing 30° chamfered edges for smoother transitions over obstacles too tall for the suspension to clear. As an added benefit, these chamfered edges are more aerodynamic than stock as well. All RPM A-arms are molded from our nearly indestructible blend of engineering grade nylons for performance you can rely on when conditions are at their worst!

Tech Notes: RPM ARRMA Kraton, Talion, Outcast & Durango DEX8T A-arms are sold in pairs. Our A-arms replace stock ARRMA #AR330249 and stock Durango #TD330707. Stock Durango dirt guards (#TD330764) are not compatible with these A-arms (must use RPM #81412).

#81405 – Rear A-arms for the ARRMA Kraton, Talion & Outcast (also fits the Durango DEX8T) – Blue – $13.95

RPM Now Offering Blue A-Arms For ARRMA 1/8 Vehicles

RPM A-arms for the ARRMA Kraton, Talion & Outcast as well as the Durango DEX8T are designed primary for strength and durability but we’ve added a few extra features in as well. First is slop elimination. Our A-arms reduce the amount of movement of the A-arm at the inner mounts, providing for better steering response and more consistent camber, caster and toe angle settings. Our next improvement is the addition of a second shock mount hole further out on the arm, providing for a lower profile suspension set-up, allowing the shocks to lay down a little further, dropping the ride height for a lower center of gravity. As an added bonus, our front A-arms are roughly 10% lighter than stock (59.5g – RPM versus 66g stock)!

RPM A-arms are designed with leading and trailing 30° chamfered edges for smoother transitions over obstacles too tall for the suspension to clear. As an added benefit, these chamfered edges are more aerodynamic than stock as well. All RPM A-arms are molded from our nearly indestructible blend of engineering grade nylons for performance you can rely on when the conditions are at their worst!

Tech Notes: RPM ARRMA Kraton, Talion, Outcast & Durango DEX8T A-arms are sold as one upper and one lower in each package. Two packages are needed for each vehicle. Our A-arms replace stock ARRMA #AR330218 & #AR330219 and also replaces stock Durango #TD330709 & #TD330710.

#81485 – Front Upper & Lower A-arms for the ARRMA Kraton, Talion & Outcast (also fits the Durango DEX8T) – Blue – $12.95
Visit RPMRCProducts.com
See more posts about RPM

Never miss an issue of RC Car Action!

Subscribe today with a Digital Edition subscription or Print + Digital combo!

Updated: October 23, 2019 — 2:31 PM

Leave a Reply

Your email address will not be published. Required fields are marked *

Air Age Media © 2019
WordPress Image Lightbox