TRX-4 Winch

RPM Front & Rear A-Arms For The Losi Mini-T 2.0 & Mini-B

RPM Front & Rear A-Arms For The Losi Mini-T 2.0 & Mini-B

From RPM:

RPM Front & Rear A-Arms For The Losi Mini-T 2.0 & Mini-B RPM Front & Rear A-Arms For The Losi Mini-T 2.0 & Mini-B RPM Front & Rear A-Arms For The Losi Mini-T 2.0 & Mini-B
Heavy Duty Front A-arms for the Losi Mini-T 2.0 & Mini-B

If you’ve been breaking stock A-arms on your Losi Mini-T 2.0 or Mini-B, RPM has a tough alternative you’ll love. Our replacement front A-arms have been beefed up in all the right places. Check out some of the updates we made (in comparison to HD, 2nd gen stock Losi A-arms):

Features:

  • The front inner hinge pin boss is roughly 25% thicker than stock (and dramatically thicker than first gen A-arms)
  • We’ve increased the overall thickness of the A-arm by roughly another 25%.
  • Support beams are consistent on thickness and are roughly 50% thicker than some of the thinner supports of the stock A-arms.
  • Beefier A-arm support beams provide better shock pivot protection, meaning the A-arm will be the 1st to strike debris instead of the shock pivot ball.

All of these strengthening upgrades, combined with some of the best engineering grade nylons in the industry equate to a set of ultra lightweight replacement A-arms that have unmatched durability and performance. Place your trust in American made. Trust RPM.

Tech Notes:

Replaces the front A-arms from stock Losi #LOS214003.

#72082 – $9.95

RPM Front & Rear A-Arms For The Losi Mini-T 2.0 & Mini-B RPM Front & Rear A-Arms For The Losi Mini-T 2.0 & Mini-B RPM Front & Rear A-Arms For The Losi Mini-T 2.0 & Mini-B

Heavy Duty Rear A-arms for the Losi Mini-T 2.0 & Mini-B

Identical to our replacement front A-arms for the Losi Mini-T 2.0 / Mini-B, RPM rear A-arms have been strengthened for superior durability and performance. Take a look at what we’ve done (in comparison to HD, 2nd gen stock Losi A-arms):

Features:

  • The inner hinge pin bosses are roughly 20% thicker than stock (and dramatically thicker than first gen A-arms)
  • We’ve increased the overall thickness of the A-arm by roughly another 25%.
  • Support beams are consistent on thickness and are roughly 50% thicker than some of the thinner stock supports.
  • Unique Shock surround protects the lower shock bottom and is less prone to damage since the shock pivot ball is captured and no longer fully exposed.

All of these strengthening upgrades, combined with some of the best engineering grade nylons in the industry, equate to a set of ultra lightweight replacement A-arms that have unmatched durability and performance. Place your trust in American made. Trust RPM.

Tech Notes: Replaces the rear A-arms from stock Losi #LOS214003.

#72152 – $9.95
Visit RPMRCProducts.com
See more posts about RPM

Never miss an issue of RC Car Action!

Subscribe today with a Digital Edition subscription or Print + Digital combo!

Never miss an issue of RC Car Action!

Subscribe today with a Digital Edition subscription or Print + Digital combo!

Eaglemoss Jeep willys 600x120
Updated: February 18, 2021 — 4:45 PM

Leave a Reply

Your email address will not be published. Required fields are marked *

Air Age Media © 2021