Traxxas Rustler 4x4 LED Light Kit 900x250

Redcat Gen8 V2 ​International​​ Scout II ​RTR Crawler [VIDEO]

Redcat Gen8 V2 ​International​​ Scout II ​RTR Crawler [VIDEO]

Redcat Gen8 V2 ​International​​ Scout II ​RTR Crawler

Redcat Gen8 V2 ​International​​ Scout II ​RTR Crawler

Redcat Gen8 V2 ​International​​ Scout II ​RTR Crawler

From Redcat Racing:
The popular Redcat Gen8 ready-to-run crawler has been upgraded, and is being released as the Gen8 V2.

The Gen8 V2 upgrades include heavy duty axles, heavy duty portal gears, newly designed heavy duty axle housings, a flat skid plate, 25kg metal gear servo and two new body colors with clear windows.

The Gen8 V2 International® Scout II professional rock crawler includes C-channel frame rails, low center of gravity battery tray, centrally mounted divorced transfer case, lockable slipper clutch, portal axles with metal gear covers, MOD-1 gears, machined aluminum spools, front CVAs, 32 rubber-sealed ball bearings, threaded aluminum shocks, 47º steering blocks with proper Ackerman, Panhard bar, LED-ready bumpers, winch-ready front bumper, and frame mounted floor pans.

The Gen8 V2 features a highly detailed fully licensed International® Scout II body, hard plastic grill, plastic folding mirrors, molded inner and outer fenders, shackle mount front bumper, receiver hitch ready rear bumper, and plastic rock sliders. The Gen8 V2’s body and bumpers are ready to have LED lights installed.

True to scale, licensed Interco IROK Super Swamper tires are mounted to functional beadlock wheels. Each wheel uses inner and outer beadlock rings for maximum strength and tire holding capability. This makes it easy to change out the foam tire inserts to suit each course and driving style.

Portal axles provide more ground clearance without needing bigger tires. On the GEN8 V2, much of the gear reduction happens inside the portal axles, which means less chassis torque twist than traditional axle shaft driven rock crawlers. The portal axles provide 54.5mm of ground clearance and include metal gear covers, metal wheel hexes, and CNC machined spools.

The Gen8 V2 uses an innovative dual design slipper clutch, which allows the driver to set the slipper clutch, or completely lock it out. The GEN8 V2 accepts a wide range of pinion gears from 9T all the way up to 23T and includes a 32P spur gear. This allows a gearing ratio of 28.12 to 71.85. A sealed pinion and spur keeps the gears safe from rocks and debris. Heavy duty Mod 1 gears can be found in the transmission, transfer case, and portal axles. The Redcat Racing GEN8 features a front mounted motor and a divorced transfer case for competition inspired weight distribution.

SPECIFICATIONS:

Gen8-V2: Fully Assembled
Motor/ESC: 550 Brushed Motor & LIPO Ready Crawler ESC
Steering Servo: 25KG Metal Gear Waterproof Servo
Radio:2.4GHz Radio System
Chassis: 1.5mm Thick Steel C-Channel Frame Rails
Drive System: 4-Wheel-Drive, Front Mounted Motor
Transmission: Single Speed with Lockable Slipper Clutch
Transfer Case: Divorced, Centrally Mounted
Length: 571mm Stock
Wheelbase: 324mm Stock (312-336mm Adjustable)
Ground clearance: 80mm stock
Suspension: 4-Link Rear and 3-Link Front with Panhard Bar
Shocks: 95mm Adjustable Coilover Threaded Aluminum Body
Axles: Portal Axles with CNC aluminum spools, 6mm Solid Rear Axle Shafts and CVA Front Axle
Wheels: 1.9in with Beadlocks
Tires: Fully Licensed Irok Super Swamper tires

Needed to complete:

  • Battery and Charger
  • AA Batteries for Transmitter

$299.99
Visit RedcatRacing.com
See more posts about Redcat Racing

Redcat Gen8 V2 ​International​​ Scout II ​RTR Crawler Redcat Gen8 V2 ​International​​ Scout II ​RTR Crawler Redcat Gen8 V2 ​International​​ Scout II ​RTR Crawler

Never miss an issue of RC Car Action!

Subscribe today with a Digital Edition subscription or Print + Digital combo!

Eaglemoss Jeep willys 600x120
Updated: October 20, 2020 — 7:01 PM

Leave a Reply

Your email address will not be published. Required fields are marked *

Air Age Media © 2020
WordPress Image Lightbox