Final Build Photos
Please rate this ride
|
Submitted By | |
Josh Rue |
|
hotchkiss, Colorado, United States of America | |
Build Information | |
Readers Ride Title | Water cooled tow pig |
Vehicle Class | Scale |
Chassis Brand | Other |
Chassis Model | 450 |
Other Chassis Brand and Model | Cen f450 |
Body Brand | Other |
Body Model | Cen 450 |
Other Body Brand and Model | Na |
Power System | Electric |
Electric Motor Brand and Model | Castle 1900 kv |
Speed Control Brand and Model | Castle copper head |
Battery Brand and Model | CNHL 8000mah |
Wheels and Tires Brand and Model | Stock |
Shocks Brand and Model | Traxxas rears with Losi helper springs |
Axles Brand and Model | Stock |
Paint Brand and Model | Stock |
Further Description/Back Story | Bought a cen as a tow rig to tow rigs and equipment down to local craw spots and hobby shop. First time out, Loaded up with two crawlers one the goose neck and headed down. Had a great time…… till the trip back up the hill home. Got about 300 ft up the hill and the motor hit its 180deg thermal cut. So there I was lookin like a circus act carrying two crawlers a 32 inch goose neck trailer and the cen back home while riding a one wheel. No pic unfortunately… So the project was on! Turned 10mm out of a boat motor water jacket and tigged it up. Laser cut a radiator tube jig to drill all the holes in upper and lower tanks. Cut all the tubes and drilled holes for caps and hose barbs then Soldered together. 3D printed mounts and shroud for fans. It’s Running a micro brushless pump. Have tested all the way up the 1/4 mile hill now. Ran full throttle with heaviest crawler, hydraulic skid steer and a 10lb +/- rock. Didn’t get over 104. Project was a functional success. 🤘🏼 |
Build Process Photos