R1 Wurks Digital-2 200A ESC

R1 Wurks Digital-2 200A ESC

r1-wurks-digital-2-200a-esc-2 r1-wurks-digital-2-200a-esc-4 r1-wurks-digital-2-200a-esc-7

From R1 Wurks:

New from R1 Motor lab is the new Digital-2 200A top of the line brushless speed controller. Developed using the most advanced CPU technology and proprietary software combo, to deliver the smoothest most responsive throttle feel yet. Months of data analysis was done both on the race track & on the dyno to fine tune the Digital-2 power delivery & brake strength. The controller offers the most advanced throttle and brake adjustability to suit a wide range of driving styles. The system offers blinky mode (zero timing) for spec racing. All adjustable settings are easily programmed using a digital program box, designed with an intuitive, easy to use interface. The unit also features A.C.L.C. Advanced Component Level Cooling system, this design allows individual Mosfets (inner & outer components) to transfer heat directly to the upper heatsink. Our safety first approach forces the user to disconnect the battery when its time to power off the controller, minimizing the chances of leaving a live battery from draining. Most systems with push button power switch continuously drain the battery even after the power is off.


  • Advanced High Speed Micro controller
  • Enhanced throttle smoothness, feel & brake strength
  • Blinky mode for spec racing (zero timing)
  • Digital program box (w/Plug in and go) intuitive, easy to use interface and auto save feature
  • Safety first NO POWER SWITCH system, forces user to disconnect the battery for safety. Most systems with push button power switch continuously drain the battery even after the power is off.
  • Premium low ESR capacitors included
  • All aluminum enclosure featuring A.C.L.C. (Advanced Component Level Cooling)
  • Adjustable throttle & brake frequency to further customize the throttle feel & power delivery
  • Most advanced programmable turbo & boost functions, featuring dyno tuned increments
  • Motor/ESC temperature protection
  • User Adjustable Low Voltage Protection
  • MS Windows Software used for future firmware updates
  • Designed to pass ROAR/BRCA/EFRA zero timing esc regulation

19 Programmable Functions:

  • Operation Mode
  • Reverse Speed
  • Low Volt Cut off (Battery Protection)
  • Drag Brake
  • Initial Brake
  • Full Brake
  • Brake Frequency
  • Power Level
  • Drive Frequency
  • Neutral Dead Band
  • Temp Cut Set
  • Boost Timing
  • Boost RPM
  • Boost ACC (Boost Timing Acceleration)
  • Turbo Timing
  • Turbo Slope
  • Turbo Delay
  • Rotation Mode
  • Restore Default


Scale: Radio controlled 1/10th scale vehicle
Continuous current: 200A
Current Burst: 950A
Power input: 4-8 cells Nimh/NiCd or 2s Lipo, 2s Life
BEC output: 6V 3A
Wire: 12awg
Cooling fan: 30x30x7mm Premuim High Speed Fan
Motor: Brushless sensored/sensorless motor
Motor limit: 3.0T
Dimension: 30.4mm(L) x 37.1mm (W) x 19.5mm(H)
Weight: 43g no capacitor, no fan

Please visit r1wurks.com for warranty & service details.

Visit R1Wurks.com
See more posts about R1 Wurks

r1-wurks-digital-2-200a-esc-1 r1-wurks-digital-2-200a-esc-6 r1-wurks-digital-2-200a-esc-5 r1-wurks-digital-2-200a-esc-8

Never miss an issue of RC Car Action!

Subscribe today with a Digital Edition subscription or Print + Digital combo!


Updated: October 21, 2016 — 2:52 PM
Air Age Media ©