PROTOform P63 1/10 Electric Touring Car Clear Body

From PROTOform:

Introducing PROTOform’s latest aerodynamic solution for high-competition 1/10 Electric Touring Car Racing, the P63.

This ultra high-downforce, super low-CG aerodynamic body shell was designed with the racer in mind, catering to today’s insanely fast 190mm sedans. P63 is packed with modern features for outstanding performance on the track and ease of mounting while preparing to dominate the competition.

Modern Aerodynamic Features:

• Radical high-downforce design with a sloped hood and cab-forward layout
• Stiffening hood ribs for low deflection in ultra-light weights
• Recessed trunk section for low CG and extra stiffness
• Sculpted side door panels for increased side-bite
• High flow rear bumper area for reduced aero drag

The P63 also features the easiest mounting of any PROTOform body yet. Returning are PROTOform’s signature Mounting Marks inside the front wheel arches, allowing you to choose your body positions in 2mm increments up to +8mm. In addition are markings on the hood, decklid, and rear bumper to easily line up your body posts no matter what chassis or rear body post configuration (vertical or horizontal) you prefer.

This body is designed to meet Global Body Spec rules and is made in the USA from high-quality, super-durable polycarbonate. It’s available in three weights: X-Lite (0.4mm, for expert drivers only), PRO-Lite (0.5mm, a good all-around option), and Light Weight (0.65, for novice drivers or windy outdoor conditions). Included with the P63 are our convenient plastic wing buttons and under-wing “nuts”, with M3 mounting screws. A stylish decal sheet, window masks, and overspray film complete the package.

This is sold as a clear and unpainted body. Image of the painted body is only to display details. No vehicle chassis is included with this product.

Features:

• Aggressive High-downforce, Low-CG Design
• Stiffening Contours Throughout the Design
• Recessed trunk section for low CG and extra stiffness
• High Flow Rear Bumper
• Easy to Mount
• Paint-then-peel Overspray Film Built-in
• Made with Crystal Clear Polycarbonate
• Made in the USA, since 1982

Four Steps to Competition Ready:

• Clean Body and apply included window mask
• Paint then peel the over-spray film off
• Sticker your body (decal sheet included)
• Mount your new body onto your Touring Car

In The Box:

(1) P63 Clear Body
(2) Wing Buttons
(2) Under-wing Nuts
(2) M3 x 6 Black Screws
(1) Decal Sheet
(1) Window Masks
(1) Paint-then-peel Overspray Film

Fits:

• 190mm Touring Car

Specs:

Product Width: 7.53″ (191 mm)
Product Length: 16.7″ (424 mm)
Vehicle Type: Touring Car
Body Style: P63
Material: Polycarbonate
Color: Clear
Scale: 1/10
Product Height: 4.53″ (115 mm)
Wheelbase: 10.1″ (257 mm)

#PRM158015 – 1/10 P63 X-Lite (0.4mm) Clear Body for 190mm TC – $33.99
#PRM158020 – 1/10 P63 PRO-Lite (0.5mm) Clear Body for 190mm TC – $33.99
#PRM158025 – 1/10 P63 Light Weight (0.65mm) Clear Body for 190mm TC – $33.99

Visit RacePF.com
See more posts about PROTOform