Traxxas HD Suspension Arms 900x250

Pro-Line PRO-Series 32P Transmission

Pro-Line PRO-Series 32P Transmission

Pro-Line PRO-Series 32P Transmission Pro-Line PRO-Series 32P Transmission Pro-Line PRO-Series 32P Transmission

From Pro-Line:

Pro-Line is finally ready to release the highly anticipated follow up to the original Pro-Line Performance Transmission: the new PRO-Series 32P Transmission! Pro-Line engineers made sure to carry over all the things from the original that made it the most popular and loved upgrade to your Slash® 2wd while making it even stronger and more capable of handling today’s extreme power systems. Whether you are racing or bashing, this Transmission is destined to become the ultimate performance upgrade for your truck!

Pre-Assembled — Install and Go!

Pro-Line has done the work for you and pre-assembled the transmission to get you up and running faster! Just Install and Go! The Sealed Differential has been pre-filled with grease but can be tuned with optional diff oil (not included) to suit your application. The updated racing-style slipper system has been pre-set for proper performance and can be adjusted to dial in your initial take off traction.

32P Spur and Steel Internal Gears

Stripping spur gears is a thing of the past with the included 32P 56 tooth Spur Gear! Choose the right 32P pinion gear for your application (between 10 and 18 tooth 32P gears for normal 540 sized motors) and run your truck with complete confidence. All the internal gears inside the Transmission are made from hardened steel to handle all the power you want to put down.

Updated Transmission Case with Solid Bumper Mount

The PRO-Series Transmission features an updated Transmission Case designed to be stronger and handle more abuse. The Aluminum Motor Mount is secured to the case with 3 screws before the clear Gear Cover is installed. A solid rear bumper mount is included with mounting holes that match the stock locations for endless bumper and wheelie bar attachment options.

3mm Thick Aluminum Motor Plate, Full Ball Bearings, & Other Awesome Features
There are so many other awesome features that make Pro-Line’s Performance Transmission a must-have. The motor mounts to a 3mm thick Aluminum Motor Plate that has been blue anodized with a laser-etched P-L logo and acts as a huge heat sink to keep your motor running cool. High-quality Ball Bearings are used throughout the Transmission and the Differential spins on huge 10mm x 16mm x 5mm Ball Bearings for incredible load capability. The Toe Block is molded into the case halves for added strength. The Hardened Steel Outdrive Shafts will accept the stock axles, as well as any aftermarket CVD’s or driveshafts that you might already have for your vehicle.

Pro-Line’s Performance Transmission is the ultimate upgrade for your Slash® 2wd or Electric Stampede® 2wd! Be the first at your Track or bash spot to take down the competition with your Pro-Line upgraded Slash® or Stampede®! Order your Performance Transmission Today!


  • Pre-Built — Ready to Install and Go!
  • Transforms your Vehicle into a True Racing/Bashing Machine
  • Strong 32P Spur Gear
  • Fully Tunable Oil-Filled Gear Differential
  • Racing Style Slipper System
  • 3mm thick Aluminum Motor Mount
  • Ball Bearings Used Throughout
  • All Steel Internal Gears for Maximum Durability
  • Updated Transmission Case with Solid Bumper Mount
  • Replacement Part Packs Available Separately Direct from Pro-Line’s Website

What’s Included:

  • Pre-Built PRO-Series 32P Transmission
  • Motor Mount Hardware


  • Slash® 2wd
  • Electric Stampede® 2wd
  • Bandit®


  • Gear Ratio (Internal): 2.72 (same as Stock Traxxas® Transmission)

#6350-00 – $123.95

See more posts about Pro-Line

Pro-Line PRO-Series 32P Transmission Pro-Line PRO-Series 32P Transmission Pro-Line PRO-Series 32P Transmission Pro-Line PRO-Series 32P Transmission Pro-Line PRO-Series 32P Transmission

Never miss an issue of RC Car Action!

Subscribe today with a Digital Edition subscription or Print + Digital combo!

Updated: August 21, 2020 — 2:55 PM


Add a Comment
  1. If you want 48P, just buy a 48P spur gear. The internals aren’t 32P.

  2. I agree…I’d buy this in 48p

  3. I wanted the one that was discontinued,but now I want this one.

  4. I hope they bring back the 48P version as well. I always liked the higher pitch gears for efficiency, Not a high power pusher so would like to see the higher pitch gearing

Leave a Reply to Ol' Shel' Cancel reply

Your email address will not be published. Required fields are marked *

Air Age Media © 2020
WordPress Image Lightbox