Pro-Line Pre-Mounted 1/6 Masher X HP Belted 5.7” Tires On Raid Black 8×48 Removable 24mm Hex Wheels

From Pro-Line:

Pro-Line is ready to unleash the long-awaited lightweight, belted tire solution for X-MAXX® and KRATON™ 8S owners with the highest performance tire and wheel combo ever conceived: The Masher X HP tires mounted on Raid 5.7″ Wheels! Pro-Line Masher tires are known for being the standard when it comes to chevron Monster Truck style tread and Pro-Line took it to the eXtreme on the Masher X by adding futuristic tread and sidewall detail that will make your truck look incredible and perform amazingly everywhere you go. The all-new Masher X HP tires go one step further by being BELTED to handle extreme power and high speeds with ease. No tire ballooning here! These tires and Raid 5.7″ wheels have been developed from the ground up to be lightweight and durable enough to handle extreme X-MAXX® and KRATON™ 8S punishment to give you the best all-around bashing experience possible.

The Raid 5.7″ Black Wheel now features a removable hex for ultimate versatility! Not only do the included hexes allow you to choose between the KRATON™ 8S and X-MAXX® axle sizes, but they also allow you to easily replace a damaged wheel hex without needing to replace your glued tires and eliminate the need for other adapters or wheel modification. The hefty 8×48 interlocking hex design is secured to the wheel by 8 M3 screws that are spaced 48mm across. Replacement Hexes are available separately (PRO638300).

Inspired by popular full-size off-road wheels, the Raid 5.7″ wheel is extremely tough and has a bold style to match. The low-profile Masher X HP tires are glued to the big diameter Raid wheel for the ultimate in lightweight, all-terrain performance. The Masher X HP tires are made for unmatched grip on dirt, street, grass, and gravel. This tire and wheel package is proudly manufactured at Pro-Line Headquarters in the USA! If you are ready to take your X-MAXX® and KRATON™ 8S to the next level of Performance and Durability, then you need Pro-Line’s new Masher X HP BELTED Tires mounted to Raid 5.7″ Wheels!

*Note that the Masher X HP tires have a maximum speed rating that, if exceeded, could result in permanently damaging the internal belt. Over-revving your Masher X HP tires could result in breaking the internal belt, which will NOT be covered under warranty. This can be caused by “diffing out” your tires or holding the throttle open while one, two, or three of your tires are stopped, which substantially increases the RPM sent to the free-spinning tire or tires. *

Please note: All tires & wheels are sold in pairs, unless otherwise noted

TIRE FEATURES:

• Lightweight, BELTED, and eXtremely Durable
• BELTED Tire Handles eXtreme Power and High Speeds with Ease
• Raid Wheel with Replaceable 24mm Hexes to fit KRATON™ 8S or X-MAXX®
• Maximum All-Terrain Traction
• Made in the USA, Since 1982

WHEEL FEATURES:

• Easily Replace Damaged Hexes
• KRATON™ 8S or X-MAXX® 8×48 24mm Hexes are Included
• Wheel Made from High-strength, Durable DuPont Nylon Material
• Raid 10-spoke Wheel Design Mimics Full-size Racing Wheels
• M3 Wheel Hex Hardware Included
• Made in the USA, since 1982

In The Box:

• (2) Masher X HP Belted F/R Tires Mounted on Black Raid 24mm Wheels
• (2) Foam Inserts
• (2) KRATON 8S 8×48 24mm Wheel Hexes
• (2) X-MAXX 8×48 24mm Wheel Hexes
• (16) M3x16 Socket Head Screws

Fits:

• KRATON™ 8S (ARA110002) Front or Rear
• X-MAXX® Front or Rear
• Other Large-Scale Vehicles with 24mm Hexes

Specs:

Compound / Hardness: Soft
Color: Black
Scale: 1/6
Package Type: Pre-Mounted
Tire Type: All-Terrain
Track Surface: All-Terrain / Backyard
Wheel Position: Front/Rear
Insert Material: Open Cell
Product Height: 8.2″ (208 mm)
Quantity Option: 2 in a package
Wheel Hex Size: 24mm
Inner Tire / Outer Wheel Diameter: 5.7 in
Product Width: 3.77″ (96 mm)
Wheel Type: Raid Removable Hex
Tire Tread: Masher X HP BELTED
Vehicle Type: Monster Truck

#PRO1017611 – $94.99

Visit ProLineRacing.com
See more posts about Pro-Line