Pro-Line Mid February Releases

RCCARACTION Default Image
New from Pro-Line:

Recoil Off-Road 1:8 Buggy Tires for Front or Rear

Pro-Line’s newest 1:8 Buggy tire arsenal addition is the RECOIL. Debuting at the 2010 Nitro Challenge the Recoil is already turning heads. Its unique “Hexagonal” base provides foundational stability while a touch of subtle siping provides the perfect balance of flexibility. Penetrating lugs assure peak performance on loose and dusty soil with the centered parallel bars provide maximum forward acceleration.

Experience TQ performance and A-main durability in one package!

Test Results:

” The Recoil has an amazing amount of stability in high bite conditions.”
~ Pro-Line Team Driver, Ryan Cavalieri

” The Recoil competes well with the Caliber in dusty conditions. It will only be faster as the groove develops. After 45 minutes at Revelation, the tire shows little wear.”
~ Pro-Line Team Driver, Travis Amezcua

Tire Features:

  • Unique hexagonal design for stability and exceptional tread life
  • For use on slightly loamy to hard packed soil
  • Multi Purpose outdoor and indoor capability
  • Square-lug technology throughout the tread design
  • Available in World Championship/extremely proprietary M2 (Medium) and M3 (Soft) compounds
  • Internal ribbing for lateral support and increased cornering control
  • Molded foam included

What’s Included:

  • Recoil tires (2 pcs)
  • Molded foam inserts (2 pcs)

SPECS:

Height:4.37″ (110mm)
Width:1.68″ (43mm)

9034-01 | M2 (Medium)
9034-02 | M3 (Soft)
9034-06 | M2 (Medium) No Foam
9034-07 | M3 (Soft) No Foam

1973 Ford® Bronco Clear Body for T/E/2.5-MAXX®, REVO®, & Savage

The wait is over! Pro-Line is pleased to announce the release of the 1973 Ford Bronco body for 1:10 Crawler and Monster Truck. Pro-Line’s classic car enthusiasts captured the overall essence of the Bronco and have now made it available in 1:10 scale format for 1:10 Rock Crawler and T/E/2.5-MAXX®, REVO® and Savage owners. Complete with detailed grill, headlights, body molding trim, and that overall distinct Bronco look, all you classic truck enthusiasts will not want to be left behind.

When you’re looking to go back in time in automotive history, then check out Pro-Line’s new 1973 Ford Bronco body.

Features:

  • Made with Genuine GE Lexan®
  • Perfect fit and proportions for the T/E/2.5-MAXX®, REVO®, & Savage
  • Paint then peel overspray film
  • Made in the USA

** Extended rear body post are required ** NOT INCLUDED

What’s Included:

  • Clear 1973 Ford® Bronco body (1pc)
  • Window templates
  • Decal Sheet

Specs:

Length:18.4″ (467mm)
Width:7.1″ (180mm)
Height:6.3″ (160mm)
Wheel Base:12.3″ (312mm)

3313-60 | 1973 Ford® Bronco

 

1973 Ford® Bronco CGR Clear Body with CGR Roll Cage for 1:10 Rock Crawler

The wait is over! Pro-Line is pleased to announce the release of the 1973 Ford® Bronco body for 1:10 Crawler. Pro-Line’s classic car enthusiasts captured the overall essence of the Bronco and have now made it available in 1:10 scale format for 1:10 Rock Crawler owners. Complete with detailed grill, headlights, body molding trim, and that overall distinct Bronco look, all you classic truck enthusiasts will not want to be left behind.

When you’re looking to go back in time in automotive history, then check out Pro-Line’s new 1973 Ford® Bronco body.

Features:

  • All-inclusive two piece system
  • CGR made from high strength injection molded nylon
  • Paint-then-peel overspray film included
  • Perfect fit for Axial AX10, SCX10, Team Losi Crawler, or other 1:10 crawlers.
  • 8 mounting points body to roll cage for a secure/durable fit and finish
  • Spare tire rack system good for 1.9” or 2.2” tires
  • CGR cage accepts Pro-Line’s Roof Rack (part # 6046-00) and other scale accessories. ALL SOLD SEPARATELY
  • Made with Crystal Clear Genuine GE Lexan
  • Four step to Race Ready:
  1. Clean Body and apply included window mask
  2. Paint, then peel the over-spray film off
  3. Sticker your body (decal sheet included)
  4. Mount your new 1973 Ford Bronco onto your Rock Crawler
  • Made in the USA

What’s Included:

  • Clear Ford® Bronco CGR body (1pc)
  • CGR Roll Cage Kit
  • Decal
    Sheet

Specs:

Length:18.4″ (467mm)
Width:7.1″ (180mm)
Height:6.0″ (152mm)
Wheel Base:12.3″ (312mm)

3310-60 | 1973 Ford® Bronco CGR with CGR Roll Cage

 

17mm Wheel Adapters for 2WD Slash Front

17mm Wheel Adapters Are you looking for more tire selections for your Slash® and Slash® 4X4? Well look no more Pro-Line fans! Pro-Line has you covered with the release of the 17mm wheel adapters! Now you can convert your Slash® to accept today’s popular 1:8 buggy size wheels and tires.

Other Adapters for Slash®

6064-00 Front
6064-01 Rear
6064-02 ProTrac™ Front
6064-03 ProTrac™ Rear

Features:

  • Made from 7075 Aluminum
  • Black anodized finish
  • Lightest package on the market

What’s included:

  • 17mm Wheel Adapters (2)
  • Wheel Nuts (2)
  • Axle Nuts (2)
  • Crush Sleeves (2)
  • Shims (4)

6064-00 | 17mm Wheel Adapters for Slash® 2WD Front

PL Beanie

Get in-style with the latest apparel from Pro-Line. Pro-Line introduces the traditional beanie. It’s quality and styling so you know it’s going to fit perfect every time you put it on.

Features:

  • New Pro-Line embroidered logo
  • 100% Hypoallergenic Ring Spun Acrylic
  • One Size Fits Most
  • Available in Gray, Red and Navy

What’s included:

  • One Beanie (1 pc)

9973-00 | PL Beanie, Gray
9973-01 | PL Beanie, Navy
9973-02 | PL Beanie, Red

Never miss an issue of RC Car Action!

Subscribe today with a Digital Edition subscription or Print + Digital combo!

 

Updated: July 21, 2015 — 10:35 AM
Air Age Media ©