TRX-4 900x250
Boost Login

Pro-Line Avenger HP Street BELTED Mounted 1:8 Buggy Tires

Pro-Line Avenger HP Street BELTED Mounted 1:8 Buggy Tires

From Pro-Line:

Pro-Line is proud to introduce the History-making Avenger HP BELTED 1:8 Buggy street tires! Pro-Line has developed the technology to mold a High-Performance herringbone weave pattern Belt inside of the all-new Avenger HP. These belted street tires were specifically made for 1:8 Buggies that love to go fast and will not balloon or expand during use. These belted tires will help you go straight and put the power down! The Avenger HP tires are pre-mounted on black dish wheels to get you up and running immediately and will provide the incredible grip that you expect from Pro-Line. This is due to the soft S3 compound as well as the deep, aggressive grooves built into the tires. Just like all of Pro-Line’s tires, these are proudly Made in the USA! Get maximum grip and stability so you can be faster than your buddies with Pro-Line’s all-new Avenger HP BELTED 1:8 Buggy street tires!

Please note that the Avenger HP tires have a maximum speed rating that, if exceeded, could result in permanently damaging the internal belt. For the Avenger HP tires that is 100 mph or about 8,000 RPM. Over revving your Avenger HP tires could result in breaking the internal belt, which will NOT be covered under warranty. This can be caused by “diffing out” your tires or holding the throttle open while one, two or three of your tires are stopped, which substantially increases the RPM sent to the free-spinning tire or tires.

Tire Features:

  • Molded-in High-Performance Herringbone Weave Pattern Belt
  • Avenger HP Tire Will Not Balloon or Expand During Use
  • Specifically Made for 1:8 Buggies That Love to go Fast
  • Soft S3 Compound Provides Incredible Grip on the Street
  • Belted Tires Give You Control to Put the Power Down
  • Soft Foam Inserts Included
  • Pre-mounted to Black Dish Wheels
  • Made in the USA, since 1982

Wheel Features:

  • Greater Stability and Connectivity
  • For use on Standard 17mm 1:8 Hexes
  • Extremely True Finish
  • Made from High Strength DuPont nylon

What’s Included:

  • Avenger HP Street BELTED 1:8 Buggy Tires Mounted on Black Wheels (2 pcs)
  • Soft Foam Inserts (2 pcs)

Fits:

  • 1:8 Buggy Front or Rear

Specs:

Height: 4.16″ (1106mm)
Width: 1.68″ (43mm)

#9069-243 – $47.56

Visit Prolineracing.com
See more posts about Pro-Line

Pro-Line Avenger HP Street BELTED Mounted 1:8 Buggy Tires Pro-Line Avenger HP Street BELTED Mounted 1:8 Buggy Tires Pro-Line Avenger HP Street BELTED Mounted 1:8 Buggy Tires Pro-Line Avenger HP Street BELTED Mounted 1:8 Buggy Tires Pro-Line Avenger HP Street BELTED Mounted 1:8 Buggy Tires

Never miss an issue of RC Car Action!

Subscribe today with a Digital Edition subscription or Print + Digital combo!

Updated: October 22, 2019 — 10:30 AM

Leave a Reply

Your email address will not be published. Required fields are marked *

Air Age Media © 2019
WordPress Image Lightbox