We 1st told you back in December about the possible return of the Square Fuzzie tire, and now Pro-Line has confirmed this is being re-released in their new M4 compound. They also have announced a Hole Shot 2.0 tread pattern for 1/8 buggies, a new 2012 BullDog lid for your Team Associated RC8.2, and much, much more. Check it all out in the press release below:
Square Fuzzie 2.2″ Off-Road Buggy Rear for 1:10 Buggy Rear
This is a pair of Square Fuzzie 2.2” Off-Road Buggy Rear Tires. Pro-Line is bringing back one of the most successful and iconic tread patterns of all time; the World Champion Square Fuzzie. The original Square Fuzzie was so advanced for its time that it dominated the race tracks for many years and was never duplicated. Now, Pro-Line is proud to introduce the all new and improved Square Fuzzie as a worthy successor to the Original. The new Square Fuzzie features countless square micro-pins laid out in a traction inducing grid pattern that will stick to the track like Velcro. The long center bars provide tons of forward bite and improved wear over the Original. These tires are ideal for any indoor/outdoor hard-packed dirt track where bar-type tires are not getting the job done. The new Square Fuzzies will give you the confidence inspiring forward and side bite to propel you to the front!
The new Square Fuzzies are already proven winners taking the Victory in the hotly contested Stock Buggy class at the 2012 Novak Race(@ the HobbyPlex in Omaha, NE 1/8/2012) in the hands of Pro-Line’s Alex Eklund ! Here is what Alex had to say about the new Square Fuzzies: “The Square Fuzzies allowed me to drive deeper into a corner before braking and carry more corner speed and able to get back out of the corner hard and fast!! They were stuck to the track!”
Mac Mitchell , Pro-Line Team Driver and local legend in Arizona, had this to say about the new Square Fuzzies: “One word…. DIALED! These are a beast at SRS (Cactus Classic track). Incredible forward grip, solid side grip, great wear. What else can I ask for?”
Don’t just take our word for it, get the new Square Fuzzies now and be the first to dominate your track with Pro-Line’s proven micro-pin technology!
Features:
- New and Improved version of a World Champion
- Already a proven Winner at the HobbyPlex and SRS
- Incredible forward and side traction
- Long lasting micro-pin tire tread technology
- Made in the USA, since 1982
What’s Included:
- Square Fuzzie 2.2” Rear Tires (2 pcs)
- Impact Firm Inserts (2 pcs)
Fits:
- 2.2″ Buggy Rear Wheels
Specs:
Height: 3.37″ (86mm)
Width: 1.66″ (42mm)
8215-02 M3 (Soft)
8215-03 M4 (Super Soft)
his is a pair of Hole Shot 2.0 Off-Road 1:8 Buggy Tires. The Hole Shot is renowned across the world as one of the most used race tires of all time. From World Championships to National Championships, Regional race events to club race events, the Hole Shot design has just about every title imaginable because it just plain works in a variety of different race conditions. Now, Pro-Line has achieved the impossible: improved on the original in every way. Through meticulous refinement the new Hole Shot 2.0 has the performance to carry on the legendary Hole Shot name well into the next Decade. The Hole Shot 2.0 provides more forward traction, increased steering response and is less edgy in the ruts making you faster than ever before. Richard Saxton, Team Associated’s testing guru, says that the new Hole Shot 2.0 is “like Cheating!!” Pro-Line’s mini-pin and square lug technology combine to give your Buggy TQ pace and last through long mains. Buy some new Hole Shot 2.0 Buggy tires now!
Features:
- Unbelievable traction on a variety of surfaces
- Represents the latest in 2012 race tire technology
- Meticulous refinement over the Original Holeshot
- Includes durable, long lasting closed cell inserts
- Made in the USA, since 1982
What’s Included:
- Holeshot 2.0 tires (2 pcs)
- Closed Cell foam Inserts (2 pcs)
Specs:
Height: 4.33″ (110mm)
Width: 1.68″ (43mm)
9041-02 M3 (Soft)
9041-03 M4 (Super Soft)
9041-32 M3 (Soft) Mounted/White
9041-33 M4 (Super Soft) Mounted/White
This is a BullDog Clear Body for the Team Associated RC8.2 Buggy. Ryan Cavalieri is preparing for the IFMAR World Championships in 2012 and has developed the most advanced body yet: the 2012 BullDog body painted by Darkside Designs. Ryan took great care in refining the design for 2012 to create even more stability with enhanced steering to gain an advantage on the track. The windshield is steeper to create more down force over the front wheels and the roof ridges have been raised to channel the air flow over the middle of the body for increased high-speed stability. The rear of the roof has been lowered and fins have been added to achieve maximum engine head cooling and stable air flow over the body. The fins also add rigidity to the body to increase aerodynamic efficiency. This is a must have body for the RC8.2 for the new racing season!
Don’t forget to submit your finished Pro-Line BullDog body to Reader’s Rides when you are done. Who knows, you could get your ride posted on the blog and you could even win a prize!
Features:
- Improved performance for 2012
- More stability and improved steering
- Made with Crystal Clear Genuine GE Lexan®
- Four step to Race Ready:
1.) Clean Body and apply included window mask
2.) Paint then peel the over-spray film off
3.) Sticker your body (decal sheet included)
4.) Mount your new body onto your Buggy
- Made in the USA, since 1982
What’s Included:
- 2012 BullDog Body (1 pc)
- Window templates
- Decal Sheet
Fits:
- Team Associated RC8.2 Buggy
3363-00
This is a pair of Sand Paw 2.8” (Traxxas Style Bead) Paddle tires for the Sand and Snow. Get ready to have some serious fun playing in the Sand and Snow because Pro-Line now has Sand Paw 2.8” tires that are perfect for your Stampede® and Stampede 4X4®! There is nothing like the rush of ripping through the sand dunes or shredding the fresh powdery snow with your truck. Other tires will just slip around in the sand and snow but the Sand Paw tires will grip, rip and roost! The tires also feature the new Traxxas Style Bead design, which will mount on all Traxxas® 2.8” wheels and Pro-Line 2.8” Traxxas Style Bead wheels. The flat tire bead design makes gluing easier and provides more gluing surface for improved bonding to the wheel. If you have ever wanted to make your truck fully capable in the sand or snow, Pro-Line once again has you covered with the Sand Paw 2.8” tires!
Features:
- Huge Paddles Perfect for Stampede® and Stampede® 4X4
- Grip and Rip through the Sand and Snow
- Awesome Split Paddle Technology for highest possible traction
- Made in the USA, since 1982
What’s Included:
- Sand Paw 2.8” Tires (2 pcs)
- Foam Inserts (2 pcs)
Fits:
- 2.8″ (Traxxas® Style Bead) Wheels
Specs:
Height: 5.22″ (133mm)
Width: 2.70″ (69mm)
1186-00
This is a pair of Pro-Line Street Fighter 2.8″ (Traxxas® Style Bead) Street Truck Tires Mounted on Desperado Black Wheels (2) for JATO®, Nitro Stampede®/Rustler®. Based on the latest in high performance on-road tire technology, the Street Fighter 2.8” has the perfect balance of G force enhancement and style that will keep truck turning heads. These tires allow for awesome doughnuts, wheelies and burnouts on the asphalt and are also extremely durable!
The Desperado wheel is made out of extremely durable nylon material and features a molded in bead-loc ring for an awesome scale look. If you love to tear up the street with and you want to make your truck stand out from the rest, get some Pro-Line Street Fighter 2.8” mounted on Desperado wheels today!
Features:
- Aggressive long wear tread for awesome traction on the street
- Official Pro-Line logo and Street Fighter name embossed on sidewall of tire
- Aggressive 6-spoke wheel design
- Molded in Bead-loc ring for scale look
- Made out of durable nylon material
- Wheels and Tires also available un-mounted
- Made in the USA, since 1982
What’s Included:
- Street Fighter 2.8″ tire (2 pcs)
- Foam inserts (2 pcs)
- Desperado Black Front Bearing wheels (2 pcs)
Fits:
- Traxxas® JATO®
- Traxxas® Rustler® Nitro
- Traxxas® Stampede® Nitro
Specs:
Height: 4.75″ (121mm)
Width: 2.70″ (69mm)
1181-11 Nitro Front
1181-12 Nitro Rear / Electric Front / Stampede® 4×4 F/R
1181-13 Electric Rear
This is a pair of Sling Shot 3.8″ (Traxxas® Style Bead) Sand or Snow Truck Tires Mounted on Desperado Black 1/2” Offset 17mm Wheels for MT Front or Rear. The newest form of fun is here with the release of the all new Sling Shot 3.8″ paddle tire for monster trucks and truggies. The Sling Shot provides hours of fun in the sand, snow or even in the occasional mud pit. Now that it comes pre-mounted on Desperado 3.8″ (Traxxas Style Bead) Wheels you have even more reason to go tear up the sand or snow!
The eleven paddles ensure maximum performance due to the true scoop design coupled with low roll outer sidewalls. The Sling Shot comes completely ready to use mounted to wheels for big Pro-Line fun!
Features:
- Big 11-Paddle design for the ultimate in traction
- Aggressive 6-spoke wheel design
- Molded in Bead-loc ring for scale look
- ½” offset wheel for all the Traxxas® Summit® fans
- Wheels made out of durable nylon material
- Ready to sling sand and snow
- Wheels and Tires also available un-mounted
- Made in the USA, since 1982
What’s Included:
- Sling Shot 3.8” Tires (2 pcs)
- Foam Inserts (2 pcs)
- Desperado Black 1/2” Offset 17mm Wheels (2 pcs)
Fits:
- Traxxas® Summit®
- Other Monster Trucks with 17mm Hexes that need a wider stance
Specs:
Height: 6.13″ (156mm)
Width: 3.32″ (84mm)
1179-11
This is a pair of Hole Shot 2.0 SC 2.2”/3.0” Tires (2) Mounted on ProTrac Black Renegade Wheels. Short course trucks have become class leaders at many tracks around the nation because it’s fun and there’s a class for everyone. For those of you who want the most out of your short course truck, we have made the Hole Shot 2.0 tires even easier to use by offering them premounted!
The Pro-Line Renegade wheel for SC trucks features a tough 10 spoke design replicating the latest in high performance full size forged racing wheels used by the pros. Detailed beadloc and lug nut hardware only adds to the realism. Combine the Renegade with the Hole-Shot 2.0 SC, which features more pins and a wider contact patch for insane amounts of traction. The unique mini-pin design provides gives the optimum level of traction in dusty, hard-packed and grooved conditions.
So if you want a set up that is super easy to use and will help you with traction and control, then check out the Pro-Line Hole Shot 2.0 mounted to the ProTrac Renegade wheels!
Features:
- Legendary Multi-time World and National Championship winning design in all scales
- Wider contact patch for improved traction in all conditions
- Highly reinforced tire carcass
- Lightweight Wheel with Simulated Bead-Loc ring
- Wheel made from high-strength, durable DuPont nylon material
- 10 Spoke design for increased rigidity
- Wheels and Tires also available un-mounted
- Made in the USA, since 1982
What’s Included:
- Hole Shot 2.0 SC tires (2 pcs)
- Closed Cell inserts (2 pcs)
- Protrac Renegade Black Wheels (2 pcs)
Fits:
- [F/R] Traxxas® Slash with ProTrac Suspension Kit Arms (#6062-00)
- [F/R] Associated SC10 with Front Inboard Hub (#6068-00) and Rear Adapters (#6064-05)
- [F/R] Associated SC10 4×4
- [F/R] Losi XXX-SCT (Front Inboard Hub kit #6069-00)
- [F/R] Losi TEN-SCTE 4WD (with trimming on webbing for front
Specs:
Height: 4.23″ (107mm)
Width: 1.81″ (46mm)
1180-15 M3 (Soft) ProTrac™ Offset
1180-16 M3 (Soft) Slash® Rear Offset
1180-19 M4 (Super Soft) ProTrac™ Offset
1180-20 M4 (Super Soft) Slash® Rear Offset
This is a pair of Blockade SC 2.2”/3.0” Tires Mounted on ProTrac™ Suspension Kit Renegade Black Wheels (2) for Slash® 2WD Front or Rear, SC10 4X4 Front or Rear and SC10 Front /Rear for Short Course Trucks. Welcome to the future of Short Course Racing – Meet the new tire that will take you there: Blockade SC. Inspiration was taken directly from the National Championship Winning 1:8 Buggy tires, providing you with the latest and greatest technology for your Short Course Truck. We have made the Blockade SC tires even easier to use by offering them premounted!
The Pro-Line Renegade wheel for SC trucks features a tough 10 spoke design replicating the latest in high performance full size forged racing wheels used by the pros. Detailed beadloc and lug nut hardware only adds to the realism. Combine the Renegade with the Blockade Tires for class leading tread life, perfectly balanced tread spacing for maximum forward bite and unique side tread that keeps you planted around the corners.
The Blockade excels in a wide variety of conditions – from hard packed to blue-groove and loose to loamy, the Blockade SC tires will outpace and outlast the competition. If you are ready to step into the future and put your SC truck on top, get your own set of Blockade SC premounts now!
Driver Testimonial
“The Blockade SC tires fit into the in-between track conditions where it’s too loose for a Hole Shot and too hard packed for Caliber. The Blockade SC tires have excellent forward traction and side bite on hard packed base with loose surface. I can’t wait to continue to test the excellent wear on my set of Blockade SC M3 tires!” Pro-Line Team Driver – Alex Eklund
Features:
- Revolutionary long lasting tread pattern generates exceptional forward and side bite on a variety of surfaces
- 2011 ROAR National Championship Inspired Design
- Latest generation V2 SC wide carcass for increased contact patch
- Lightweight Wheel with Simulated Bead-Loc ring
- Wheel made from high-strength, durable DuPont nylon material
- 10 Spoke design for increased rigidity
- Wheels and Tires also available un-mounted
- Soft, re-usable and water-proof Closed Cell foam inserts included
- Made in the USA, since 1982
What’s Included:
- Blockade SC 2.2”/3.0” Tires (2 pcs)
- Closed Cell inserts (2 pcs)
- Protrac Renegade Black Wheels (2 pcs)
Fits:
- [F/R] Traxxas® Slash with ProTrac Suspension Kit Arms (#6062-00)
- [F/R] Associated SC10 with Front Inboard Hub (#6068-00) and Rear Adapters (#6064-05)
- [F/R] Associated SC10 4×4
- [F/R] Losi XXX-SCT (Front Inboard Hub kit #6069-00)
- [F/R] Losi TEN-SCTE 4WD (with trimming on webbing for front)
Specs:
Height: 4.26″ (108mm)
Width: 1.81″ (46mm)
1183-15 M3 (Soft) ProTrac™ Offset
1183-16 M3 (Soft) Slash® Rear Offset
1183-19 M4 (Super Soft) ProTrac™ Offset
1183-20 M4 (Super Soft) Slash® Rear Offset
This is a pair of Tazer Off-Road 1:8 Buggy Tires mounted on V2 White Wheels. Pro-Line has stunned the competition and shocked the racing community with the latest in high-performance race tire technology:
The Tazer. With the input of World Class driver Ty Tessmann, Pro-Line has created a race tire that provides unmatched forward bite in loose and dusty track conditions without the undesired edginess. The Tazer features large overlapping center treads that will last throughout the long A-mains and perfectly sized lugs that will propel you to the top of the podium. Bring the competition to its knees – Get some Premounted Tazers today!
Features:
- Inspired by World Class racer Ty Tessmann
- Incredible forward traction in dusty conditions
- Represents newest in tire tread technology
- Includes durable, long lasting closed cell inserts
- Wheel made out of durable nylon material
- Wheel and Tire also available un-mounted
- Made in the USA, since 1982
What’s Included:
- Tazer tires(2 pcs)
- Closed Cell foam Inserts (2 pcs)
- V2 White Wheels (2 pcs)
Fits:
- 1:8 Off-Road Buggies with 17mm hex
Specs:
Height: 4.33″ (110mm)
Width: 1.68″ (43mm)
9040-32 M3 (Soft) Mounted/White
9040-33 M4 (Super Soft) Mounted/White
This is a pair of Blockade M3 (Soft) Off-Road 1:8 Buggy Tires Mounted on V2 White Wheels (2) for Front or Rear . Historic. Revolutionary. The Best. Just a few words that have been used to describe Pro-Line’s new Blockade tire. History was made the first time the Blockade touched the race track – Winning the 2011 ROAR Fuel Off-Road Nationals by 2 laps at the hands of Ryan Cavalieri! The Revolutionary tread design features large lugs for class leading tread life, perfectly balanced tread spacing for maximum forward bite and uniquely blended side tread that reduces the edginess found in other race tires. This tire will give your RC8B, D8, MP9, MBX-6, 8ight or Hyper buggy qualifying speed with tread life capable of handling hour long A-mains. Pro-Line’s Blockade is the new must-have 1:8 Buggy Race tire and will dominate your local track. Now that they come mounted onto Pro-Line’s Velocity V2 wheels , you will tear up the track in an even shorter amount of time. The pre-mounted Blockade – The latest way that Pro-Line is Racing to Bring You The Best!
Features:
- History making – 2011 ROAR Fuel Off-Road National Champion
- Revolutionary tread design for maximum life and traction
- Wheel made out of durable nylon material
- Wheel and Tire also available un-mounted
- Made in the USA, since 1982
What’s Included:
- Blockade Tires(2 pcs)
- Closed Cell foam Inserts (2 pcs)
- V2 White Wheels (2 pcs)
Fits:
- 1:8 Off-Road Buggies with 17mm hex
Specs:
Height: 4.37″ (111mm)
Width: 1.68″ (43mm)
9039-33 M4 (Super Soft) Mounted/White
[nggallery id=610]
![RC Car Action - RC Cars & Trucks | This 1/3 scale 125cc V10 Buggy is CRAZY [VIDEO]](https://www.rccaraction.com/wp-content/uploads/2018/05/V10-HP.jpg)
Stay up to date with the latest information, sign up for our FREE newsletter today.
