Traxxas ERevo RCCA 900x250
Boost Login

Search Results for – "Vaterra"


SSD HD Titanium Link Set For The Vaterra Ascender WB2

SSD HD Titanium Link Set For The Vaterra Ascender WB2

From SSD: FEATURES: Complete titanium suspension link set Includes panhard bar Internal thread Direct fit onto Vaterra Ascender using stock Vaterra rod ends Suitable for Ascender WB2 290mm wheelbase (Chevrolet K10) Stronger than aluminum Lighter than steel SPECIFICATION: Diameter:  5.8mm Internal thread:  M3 WHAT’S INCLUDED 5 X  78mm Titanium links 2 X  66mm Titanium links […]
Vaterra Ascender 1972 Chevy K10 [VIDEO]

Vaterra Ascender 1972 Chevy K10 [VIDEO]

The 1972 Chevy K10 is the latest truck from Vaterra to be based on the Ascender platform. With this truck you are getting the front half of an old school Chevy pickup and in the rear is a tubular bed similar to the ones used by full-size truggy trail trucks. It also features a floating […]

Ads after 2 posts

Boost Membership Inline 600x120

Ads after 6 posts

SSD Titanium Steering Links For The Vaterra Ascender

From SSD: Features: Titanium steering links Internal thread Direct fit onto Vaterra Ascender Note: The Ascender assembly manual shows the drag/lower steering link as 90mm long.  However, it is actually 91.5mm long.  So this kit includes a 90mm link and a 1.5mm spacer just in case Vaterra change it to 90mm in future releases. Sspecification: […]

Ads after 2 posts

Ads after 6 posts

SSD Pro Aluminum Knuckles For The Vaterra Ascender

SSD Pro Aluminum Knuckles For The Vaterra Ascender

From SSD: FEATURES: CNC machined aluminum Anodized black Scale design Fits stock Ascender C hub, bearings & hardware Optional matching SSD Pro Aluminum C hubs are available (SSD00109 Black & SSD00113 Grey) WHAT’S INCLUDED: 1 pair (Left, Right) Pro Aluminum Knuckles (Black) HARDWARE: 2 M3 x 16mm  screw SSD00111 – Pro Aluminum Knuckles for Ascender […]
SSD Pro Aluminum C Hubs For The Vaterra Ascender

SSD Pro Aluminum C Hubs For The Vaterra Ascender

From SSD: FEATURES: CNC machined aluminum Anodized black Scale design 5 degrees more caster than stock C hubs Fits stock Ascender axle Fits stock Ascender knuckles Optional matching SSD Pro Aluminum knuckles are available  ((SSD00115 Grey & SSD00111 Black) WHAT’S INCLUDED: 1 pair (Left, Right) Pro Aluminum C Hubs (Black) HARDWARE: 5  M3 x 12mm […]

Ads after 2 posts

Ads after 6 posts

Gear Guide 2019
SSD 78 And 90mm Titanium Suspension Links For The Vaterra Ascender

SSD 78 And 90mm Titanium Suspension Links For The Vaterra Ascender

From SSD: 78mm Titanium Links for Ascender Features: Titanium suspension links Internal thread Laser etched Direct fit onto Vaterra Ascender Suitable for front lower suspension on 314mm wheelbase Ascender (Blazer) Suitable for front lower suspension on 302mm wheelbase Ascender Suitable for rear upper and lower suspension on 302mm wheelbase Ascender Suitable for rear upper and […]
Vaterra Introduces 1972 Chevy C10 Pickup Truck [VIDEO]

Vaterra Introduces 1972 Chevy C10 Pickup Truck [VIDEO]

New from Vaterra is this sweet 1972 Chevy C10 Pickup Truck and it’s based on the  proven V100-S chassis. It comes RTR and includes everything you need to get it going including a 6-cell NiMH battery and charger. The street look is pretty sweet but it will also look great with a bit of a lift. […]

Ads after 2 posts

Ads after 6 posts

Vaterra Adds Bradley Morris K&N Replica Mustang Drifter to V100-S Lineup [VIDEO]

Vaterra Adds Bradley Morris K&N Replica Mustang Drifter to V100-S Lineup [VIDEO]

Short-course racer and drift-driver Bradley Morris has two new replica models courtesy of Horizon Hobby. There’s an ECX Torment in his official K&N colors (see it here), and this latest Vaterra: the 2015 Mustang done up as Bradley’s factory drift car. It’s a standard V100-S under the Lexan, so you’re looking at shaft-driven 4WD, waterproof […]
Vaterra RTR 2015 K&N Ford Mustang GT V100 1/10 Drift Car

Vaterra RTR 2015 K&N Ford Mustang GT V100 1/10 Drift Car

From Vaterra: Most racers drive on the edge. Drift racers drive right passed it. They willingly abandon the security of grippy tires and traction control so they can hurl their vehicles sideways through turns using nothing more than raw horsepower and gut instincts to stay on the track. Now you too can experience the rush […]

Ads after 2 posts

Ads after 6 posts

ST Racing Concepts Vaterra Ascender Diff Cover And Pro-Line Beadlock Rings

ST Racing Concepts Vaterra Ascender Diff Cover And Pro-Line Beadlock Rings

From ST Racing Concepts:  CNC Machined Aluminum Diff Cover for Vaterra Ascender/Bronco Scale Truck Improve the durability and add great looks to your Vaterra Ascender/Bronco’s front and rear axle with these high quality CNC Machined Aluminum Diff Cover.  Direct replacement of the stock plastic piece.  Available in Scale Black, Gun Metal, Natural Silver anodizing with […]
Air Age Media © 2019
RC Car Action
WordPress Image Lightbox