0026_TD_AE_B6D_Build

RC Car Action - RC Cars & Trucks | 0026_TD_AE_B6D_Build

The steering blocks are next to be prepped and mounted in the front caster block. The bearings go in on either side (without a crush tube like the B5m did) followed by inserting the aluminum 5mm offset front axle. The metal steering blocks are attached to the steering block via two screws. The ball stud has a 2mm blue aluminum washer underneath and held in with a 3mm nut.

Never miss an issue of RC Car Action!

Subscribe today with a Digital Edition subscription or Print + Digital combo!

Air Age Media © 2022