OFNA Hyper 10SC Bump 2.0 OFNA Hyper 10SC Bump 2.0

New from

The 2010 U.S. Nationals Champion OFNA Hyper SC 10 Pro 4×4 is a kick in the pants 1/10 scale 4 wheel drive short course truck kit that is competitive right out of the box. This truck is right at home on the track running with 1/8 scales nitros and electrics. No more having to hide in the corners waiting for the big bad 1/8 bullies to go by. Now, THEY will be the ones getting out of the way as you use your front fender on their backside. This kit is 90% pre assembled and includes chassis, wheels, tires, and unpainted body.

Now includes:

  • New Exclusive Lightened CNC ‘Tim Bump’ Chassis
  • New Hard Anodized Shocks
  • New Suspension Arms
  • New Delrin Shock Pistons
  • Blue OFNA Delrin Spur Gear & Black STRC Delrin Spur Gear

NitroHouse sells the Tim Bump modified Hyper 10SC 2.0 kit that includes a CNC lightweight chassis that allows racers to move the battery box from Zero, 8mm, 36mm and 46mm back for more rear traction if needed and to adjust jumping attitude. Also includes new hard anodized shock bodies, hard anodized shock towers, new 2-hole and 3-hole shock pistions, and white spring set.

  • Bump Lightweight CNC Chassis
  • Four battery mount positions
  • 30% lighter than stock chassis
  • Narrow flat bottom chassis allows the chassis to roll more through corners without bottoming out or snagging on ruts
  • 4 battery positions from 0mm, 8mm, 36mm and 46mm back
  • Flextech front bumper
  • Side guards and rollcage/handle
  • Un-mounted wheels and tires
  • Flextech rear bumper
  • Flex control rear chassis brace
  • Delrin spur gear
  • CNC Motor Mount
  • Aluminum center chassis stiffener
  • Center CNC 7075 aluminum drive shafts
  • New CNC hard anodized threaded shock bodies for smooth shock action and long life
  • New Delron 2-hole front shock piston
  • New stiffer front lower arms
  • Hard anodized front shock tower
  • New stiffer rear lower arm with an added 3rd shock location
  • New Delron 3-hole rear shock pistons
  • Lower rear arm can be moved forward and back to adjust wheelbase
  • Front Pillow Ball Suspension allows for adjustable camber and caster
  • Front CVD’s
  • Oversized battery box allows for different size 2S lipo battery packs and fine tuning of weight balance
  • Dimensions: 5 13/16″ Long x 1 5/16″ Wide (147mm x 34mm)
  • Uses 2 Velcro straps to hold in place
  • Slim lightweight chassis design with superb weight balance
  • Side guards to keep the competition from getting to your electronics
  • Low center of gravity
  • Includes the new Black 54mm Ackerman bar
  • As an added bonus, NitroHouse now includes the STRC Delrin spur gear with the Bump Edition.


Length: 21 inches
Wheel Base: 12.75 inches
Width: 11 inches

Kit Requires:

  • Radio with receiver
  • Servo
  • Speed Controller and Motor
  • Battery Pack
  • Charger

OFN14615-B2 – $289.95

Never miss an issue of RC Car Action!

Subscribe today with a Digital Edition subscription or Print + Digital combo!


Updated: January 7, 2011 — 1:44 PM
Air Age Media ©